• 한국건설순환자원학회논문집
• /
• 제10권4호
• /
• pp.443-449
• /
• 2022

섬유보강 콘크리트 제조 시 감섬유 대체재료로서 선반 스크랩을 활용하는 것이 효과적이다. 왜냐하면, 선반 스크랩은 철강 제품의 부산물로서 경제적일 뿐만 아니라 강섬유의 조성과 매우 유사하기 때문이다. 본 연구의 목적은 선반 스크랩 보강 모르타르의 압축강도 및 인장거동을 평가한 후 인장거동에 대한 재료모델을 제안하는 것이다. 이를 위하여 물-결합재비 30 % 및 40 %에 각각에 대하여 선반 스크랩을 총 부피비의 1.5 %를 혼입한 선반 스크랩 보강 모르타르를 제작한 후 압축강도 및 인장거동 등의 역학적 특성을 평가하였다. 또한 선반 스크랩 보강 모르타르의 실험 결과를 바탕으로 인장거동에 대한 재료모델을 제안하였으며, 제안한 모델은 실험 결과와 비교적 잘 일치하는 것으로 나타났다.

• Composites Research
• /
• 제19권1호
• /
• pp.15-21
• /
• 2006

일방향 섬유로 보강된 고성능 복합재료의 경우 모든 방향에서 곡률을 가지는 구조물의 제작에 용이하지 않다. 본 연구에서는 높은 비강성, 비강도를 가지는 일방향으로 보강된 AS4/PEEK 프리프레그 테이프를 이용한 축소 시제 복합재료 접시형 안테나 반사판의 개발 결과를 보여준다. 개발을 위해서 유한요소법을 통한 적층인자 연구를 통한 저열팽창/등방변형의 반사판 설계기법을 확립하였으며, Fiber Placement System을 통한 자동섬유적층법을 이용하여 접시형 안테나 반사판이 제작되었다. 제작된 반사판은 Full Bridge Circuit의 Strain Cage를 이용한 열변형 실험법으로 열팽창 거동에 대한 실험을 수행하였으며, 열변형 해석결과와의 비교를 통하여 제작된 구조물을 검증하였다.

• 한국산업융합학회 논문집
• /
• 제27권1호
• /
• pp.207-212
• /
• 2024

Recently, with the strengthening of environmental regulations, there has been an increasing interest in eco-friendly energy sources, leading to a trend of the increasing scale of Cargo Containment Systems (CCS) for Liquefied Natural Gas (LNG) carriers. Among these systems, membrane tanks have gained popularity in LNG transport vessels due to their superior spatial utilization and competitiveness. However, due to high initial investment costs and the difficulty in repair in case of damage, a safety layer, the secondary barrier, must be installed without fail. In this study, in order to apply a new secondary barrier to the existing membrane-type LNG CCS, tests were conducted on the fiberglass layer previously used in the Triplex-Flexible Secondary Barrier (FSB), substituting it with basalt fiber. Tensile and vertical tensile tests were performed to assess the newly applied material. Environmental tests were conducted at room temperature (25℃) and extremely low temperatures (-170℃), considering the temperatures to which substances may be exposed during LNG vessel operations. The basalt-FSB produced in this study demonstrated superior results compared to the specifications of the existing product, confirming its potential applicability for implementation.

• Journal of Animal Science and Technology
• /
• 제45권4호
• /
• pp.607-616
• /
• 2003

본 실험은 육계분과 제과부산물로 제조된 TMR(TDN 69%)에 입자도가 각기 다른 여분의 육계분과 볏짚(diet DM의 10% 수준)을 혼합하여 기존의 배합사료와 볏짚 급여 체계(대조구)를 100% 대체하였을 때 면양에 의한 행동 양상, 영양소 섭취량, 체내 소화율, 가소화 영양소 섭취량, 반추위 성상, 혈액 성상 및 체내 질소 출납에 미치는 영향을 평가하고자 실시하였다. 대조구와 비교해서 TMR 급여구들은 일일 섭취시간, 반추시간, 총 저작시간이 감소하였고(P<0.05), 음수시간은 증가하였으며(P<0.05), 사료 DM 섭취량이 비슷한 상황에서 가소화(digestible) DM, OM, fiber 및 총 영양소 섭취량은 낮았으며(P<0.05), EE를 제외한 영양소 소화율 또한 낮았으나(P<0.05), 반추위 발효 성상(pH, VFA 생성량 및 비율, acetate/ propionate 비율, 탄수화물 발효 효율, 반추위 NH3-N)과 혈중 urea-N 농도는 별 차이 없이 정상적이었으며, 특히 사료 단백질의 체내 활용성(소화율 및 축적율)은 양호한 것으로 나타났다. TMR에 입자도가 작은 육계분을 입자도가 큰 볏짚으로 diet DM의 10% 수준을 대체하였을 때, 일일 섭취시간, 반추시간, 총 저작시간은 증가하였으며(P<0.05), 음수시간은 정상에 가깝게 감소하였고(P<0.05), 그 외의 상기한 parameter에는 전혀 영향을 미치지 않았다. 결과적으로 육계분과 제과부산물로서 적정사료 에너지 수준을 고려하여 제조된 TMR은 반추동물의 기존 배합사료-볏짚 급여 체계를 대체할 수 있는 잠재적 가능성을 시사하였으며, 특히 TMR 급여 시 소량의(건물 10% 수준) 볏짚 공급은 면양의 행동 양상을 보다 양호하게 만들었다.

• 한국자원식물학회지
• /
• 제22권4호
• /
• pp.312-316
• /
• 2009

In the present study, the anti-cancer activity of 80% ethanol extracts from 120 kinds of medicinal herbs and native plants were investigated. Among them, the barks of Melia azedarach L. var. japonica Makino showed the highest cytotoxicity in HCT-15 human colon cancer cell. With this result, we carried out hollow fiber (HF) assay and anti-metastasis study to confirm the anti-cancer effects of M. azedarach var. japonica. In MTT assay, M. azedarach var. japonica.inhibited the proliferation of HCT-15 cells in dose-dependent manner. HF assay was carried out using A549 human adenocarcinoma cell, HCT-15 and SK-Hep1 human liver cancer cell via intraperitoneal (IP) and subcutaneous (SC) site. As a results, SK-Hep1 implanted in IP site showed the highest cytotoxicity. The result from metastatic model using B16/BL6 mouse corresponded to that of HF assay. These results suggest that the ethanol extract from M. azedarach var. japonica. might have a potent anti-cancer activity and advanced study is needed for the development of novel natural anti-cancer drug.

• 한국생활과학회지
• /
• 제10권2호
• /
• pp.205-213
• /
• 2001

A survey was conducted to investigate the intake pattern of health supplements and health foods by using questionnaire. The data were collected from 395 adults over middle age and analyzed with SAS program. The natural foods were most frequently taken among health supplements and health foods for health. There was no difference in pattern of health supplements or health foods intake between male and female. The item taken over 20% of subjects was health drinks, green tea, ginseng product, dietary fiber drink, honey, general tea, tonic medicine from natural foods, vitamin B, vitamin C from nutrition supplements, and Lactobacillus product from health supplements. As the main reason for taking health supplements or health foods, the male indicated recovery of fatigue and improvement of health, but the female indicated recovery of fatigue and protection or treatment on disease(p<0.001). The frequency of taking health supplements or health foods was once a day. About the effect of health foods 70.1%, of subjects answered not bad and 25% responded very helpful for their health. Twenty percent of subjects experienced side effects such as diarrhea. The results showed that the proper education program should be developed for consumer to choose suitable health supplements or health foods according to their dietary life and health condition.

• 보존과학연구
• /
• 통권21호
• /
• pp.101-118
• /
• 2000

Stone cultural properties(pagoda, Buddhist statue etc.) is moved in original place for many reasons and restored after taking to pieces for structural safety. With the movement and restoration after taking to pieces, the cast iron is used for the sake of a fixation and horizontality. The stone cultural properties are spoiled the beauty and accelerated the weathering because of the corrosion product of cast iron. So we need to substitute for the improved property in all aspects. We are executed the corrosion test and inquired the property of material on the usable material for the shim of stone cultural properties. That is the Cast iron, Stainless steel, Titanium and Fiber Reinforced Plastics. In the result of the physical property and strength, the Stainless steel and Titanium was superior to the Cast iron. And the Stainless steel and Titanium was slower than the Cast iron in the corrosion velocity for the acid, salt and rain. If the shim is substitute the Stainless steel or Titanium for the Cast iron, the stone cultural properties are able to reduce the pollution of stone cultural properties by corrosion product and should not happen in the matter of stone pagoda.

• 펄프종이기술
• /
• 제42권2호
• /
• pp.95-101
• /
• 2010

For the development of higher-sizing performance of paper, a sizing agent using recycled PET was synthesised. Polyester resin was extracted from wasted PET by subcritical hydrolysis and finally modified to synthetic sizing agent by mixing water-disperse PET with triphenyl phosphite(TPP). The modified PET was considered as an internal sizing agent in different wet-end papermaking conditions. The optimum condition in sizing efficiency was obtained in initial pH of 6.5 in case of rosin+alum system, and 7.5 in case of rosin+alum+PET system, respectively, and in addition amount of PET 3%. The sizing efficiency was also closely related according to the fiber properties of wet-end slurry, such as virgin fibres from UKP and recycled fibres from KOCC. The application of modified PET was good in strength improvement of paper, specially in tensile strength.

• 복식문화연구
• /
• 제12권6호
• /
• pp.999-1009
• /
• 2004

Chitin is a derived product from the shell of shrimp or crab. Chitosan, a deacetylated product of chitin, has widely been used in the biomedical sector, food industry, and textile industry. Chitosan exhibits fiber-forming property under certain conditions. Nonwoven fabrics made of chitosan fibers may have diverse applications in the industry. Previous studies have revealed that the dye uptake properties of natural dyestuffs improved by the chitosan pretreatment on the fabric specimens. In this case, fabric specimen is coated with acidic salt form of chitosan, which is different from the pure chitosan, since the coating process employes coating with the acidic solution of the chitosan and subesquent drying. In this study, chitosan nonwoven fabric samples were prepared from chitosan sample having deacetylation degree of $100\%$ and molecular weight of 650,000. Chitosan nonwoven fabrics maintain the form of $-NH_2$ end-group. These in turn exhibit higher dye uptake ability than the fabrics coated with chitosan acidic solutions do.

• Fibers and Polymers
• /
• 제2권4호
• /
• pp.203-211
• /
• 2001

Residual stresses were predicted by a flow analysis in the mold cavity and residual stress distribution in the injection molded product was measured. Flow field was analyzed by the hybrid FEM/FDM method, using the Hele Shaw approximation. The Modified Cross model was used to determine the dependence of the viscosity on the temperature and the shear rate. The specific volume of the polymer melt which varies with the pressure and temperature fields was calculated by the Tait\`s state equation. Flow analysis results such as pressure, temperature, and the location of the liquid-solid interface were used as the input of the stress analysis. In order to calculate more accurate gap-wise temperature field, a coordinate transformation technique was used. The residual stress distribution in the gap-wise temperature field, a coordinate transformation technique was used. The residual stress distribution in the gap-wise direction was predicted in two cases, the free quenching, under the assumption that the shrinkage of the injection molded product occurs within the mold cavity and that the solid polymer is elastic. Effects of the initial flow rate, packing pressure, and mold temperature on the residual stress distribution was discussed. Experimental results were also obtained by the layer removal method for molded polypropylene.