• 한국식품영양학회지
• /
• 제7권4호
• /
• pp.274-283
• /
• 1994

To provide the efficient application scheme of buckwheat dietary fiber and basic information of seed germination, buckwheat(Fagopyrum esculentum Moench) was germinated at 10$^{\circ}C$ for 7 days and the contents and composition of the total dietary fiber(TDF), insoluble dietary fiber(IDF), soluble dietary fiber(SDF) wire examined at 24 hour intervals. The TDF content in ungerminated seeds was 24.86o on dry weight basis. It decreased for the 1st day of germination, but gradually increased for 7 days afterwords. The contents of IDF and SDF in ungerminated seeds were 22.05, 1.42% respectively. The IDF and SDF contents decreased in the initial stage of germination, but then gradually increased. The composition of the IDF and SDF in the TDF during the germination period showed different tendencies. The IDF decreased with germination time until 5 days and then increased. The SDV increased until 5 days and then decreased gradually. The TDF contents obtained by AOAC method were generally higher than those obtained by Prosky method. The TDF contents obtained by the two method, however, were very closely correlated (r=0.9966, p< 0.01) The IDF(X1) and SDF(X2) showed the significant regression equation(p<0.01) with the root length(Y). The equation was Y: -12.6681+0.5089${\times}$ 1 $\div$ 0.6022Xa and R2 was 0.968.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1993년도 가을 학술발표회 논문집
• /
• pp.23-28
• /
• 1993

Shearing properties of soil reinforced with discrete randomly oriented inclusions depend on soil density, particle size, grading, fiber length, tensile strength and stiffness of fiber, mixing ration of fiber, confining stress, etc.. In this paper the effects of those various factors on shear strength of the fiber-reinforced soil was evaluated through triaxial tests and uniaxial tests. Tests were performed on two sandy soils and one silty soil with inclusions in varing lengths, contents and tensile strengths and tested at different confining stresses in triaxial test. From the experimental results, it was investigated if there is an optimal range of fiber lengths and fiber contents for the tested soils.

• 한국농공학회지
• /
• 제41권5호
• /
• pp.93-98
• /
• 1999

The results of an experimental investigation on the characteristics of compaction and compressive strength of polypropylene fiber reinforced soil are presented in this paper. This study has been performed to obtain the physical properties of PFRS(polypropylene fiber reinforced soil) such as strain-stress relationships, OMC(optimum moisture contents) and ${\gamma}$dmax (maximum dry unit weight), with four different contents (i.e., 0.1%, 0.3%, 0.5% and 1.0% weights ) of mono-filament and fibrillated polypropylene fibers. From the compaction test results, it is found that OMC increased with the contents ratio of fiber, but ${\gamma}$dmax decreased. It means that the improvement of the workability and the reduction of the weight of embankment structures by the asddtion of the polypropylene fiber. And, from the compression test results, it is found that the additon of the polypropylene fiber remarkably improved the compressive strength of PFRS. And it was observed in the viewpoint of strength that the fibrillated polypropylene fiber reinforced soil is more effective than the mono-filament polypropylene fiber reinforced soil.

• International Journal of Safety
• /
• 제8권2호
• /
• pp.20-25
• /
• 2009

In this study, an experiment in the field was performed to analyze the mechanical properties and the influence of steel fiber and silica fume on the rebound ratios of shotcrete. The experimental parameters which are the reinforcing methods (steel fiber, wire mesh), steel fiber contents (0.0%, 0.5%, 0.75%, 1.0%), silica fume contents (0.0%, 10.0%), layer thickness (60 mm, 80 mm, 100 mm), and the placing parts (sidewall, shoulder, crown) were chosen. From the mechanical test, it was found that the flexural strength and toughness is significantly improved by the steel fiber and/or silica fume. According to the results for the side wall in this test, the larger the fiber contents are in case of steel fiber reinforced shotcrete, the less the rebound ratios are within the range of 20-35%, compared to the wire mesh reinforced shotcrte. And also, the reduced rebound ratios were very larger in using steel fiber reinforced shotcrete with silica fume content of 10%, and these results are true of the shoulder and the crown. respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.327-332
• /
• 1997

This study is aimed to investigate the effect of load and deflection on steel fiber reinforced concrete slab. Slabs were made with Hooked and Straight types steel fiber and compared a change of steel fiber contents and fiber types. Test were carried out to evaluate he first crack load, maximum load and deflection of slab. At the result, the first crack load, maximum load and energy absorption capacity were increased remarkably as steel fiber contents wee increased. And we found that the deflection of slab at same load ere decreased as steel fiber contents were increased, too. As the aspect ration was increased, the first crack load, maximum load and energy absorption capacity were increased.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.54-54
• /
• 2022

Recently, as one of the major problems in the quality of sweetpotato, occurrence of thin and long fibrous tissues in storage root acts as a negative factor when consumers eat sweetpotato. In this study, the fiber content was compared according to the cultivation period in storage roots of 'Sodammi' and 'Hopungmi', which were newly bred and developed, and in that of 'Hogammi', which contains a lot of fibrous tissues. To isolate of fiber from storage root, the Association Official Analytical Chemists (AOAC) method was applied for quantifying fiber present in storage root of sweetpotato. The fiber contents isolated by this method is calculated by converting the weight of the storage root. The fiber content was measured every 20 days from 60 to 120 days after planting. As a result of this study, the lowest amount of fiber was 'Hopungmi' (70~140 mg/100 g), and the highest amount of fiber was observed in 'Hogammi' (115~223 mg/100 g). 'Sodammi' showed an intermediate level (104~149 mg/100 g) between the fiber content of 'Hopungmi' and 'Hogammi'. The fiber contents of 'Hopungmi' was 39% lower than that of 'Hogammi'. As the increased cultivation periods, the fiber contents showed a tendency to decrease. In the future research, the length, thickness, and fiber contents will be investigated to compare the degree of taste inhibition.

• 한국건축시공학회지
• /
• 제16권3호
• /
• pp.201-209
• /
• 2016

본 연구에서는 천연섬유인 KN섬유를 섬유보강 콘크리트에 사용하기 위한 방안으로, KN섬유의 혼입량 및 유기질 섬유보강재 종류에 따른 콘크리트의 공학적 특성을 실험적으로 확인하였다. 이러한 연구를 위하여 KN섬유의 혼입량 4종류(0, 0.3, 0.6 및 $0.9kg/m^3$) 및 비교용 섬유보강재(JT, CEL, PP 및 NY섬유) 4종류를 대상으로 슬럼프, 공기량, 소성수축 시험 및 압축강도, 인장강도, 휨강도, 그리고 건조 수축량, 탄산화 깊이 등을 실험하였다. 실험결과, KN섬유의 혼입량 $0.6kg/m^3$일 때, 인장강도 및 휨강도 증진에 매우 효과적이며, 소성수축 균열 및 건조수축량 저감, 탄산화 깊이에도 큰 효과가 있는 것으로 나타났다. 또한, 동일한 혼입량($0.6kg/m^3$)을 사용한 유기질 섬유보강재와의 비교실험에서 탄산화 깊이를 제외한 인장강도 및 휨강도, 소성수축 균열 및 건조수축량 저감 등에 KN섬유가 우수한 것으로 나타났다. 따라서, KN섬유의 혼입량 $0.6kg/m^3$를 사용하여 섬유보강 콘크리트에 적용하는 것이 콘크리트의 성능 및 환경성, 경제성 측면에서 가장 적합한 것으로 나타났으며, 향후 현장적용성에 대한 지속적인 연구가 요구된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권4호
• /
• pp.86-95
• /
• 2019

탄소섬유는 경량이면서 높은 기계적 특성 때문에 우주항공, 선박, 자동차, 토목 및 건축과 같은 산업분야에서 그 어느 때 보다 더 광범위하게 적용되고 있다. 본 연구는 섬유혼입률 및 섬유길이 변화에 따른 탄소섬유 보강시멘트 복합재료( CFRC)의 역학적 특성과 휨 거동을 분석하였으며, 또한 자연 낙하시험에 의한 모르타르 시편에 대한 내충격성을 비교, 검토하였다. 더불어, 탄소섬유(CF)의 혼입률은 0.5%, 1.0%, 2.0% 및 3.0%로 변화를 주었으며, 각각의 섬유길이는 6 mm와 12 mm를 사용 하였다. 실험결과, 플로우 값은 탄소섬유의 뭉침현상으로 인해 유동성 측면에서 매우 불리하였으며, 단위용적질량은 다소 감소하였다. 특히, 압축강도는 탄소섬유 혼입량이 증가함에 따라 감소하는 것으로 나타내었다. 반면 휨 강도는 섬유 길이가 12 mm이고 2% 혼입한 것이 가장 높은 휨 강도를 보였다. 내충격성 시험결과, 보통 모르타르 시편은 완전파괴까지의 낙하횟수가 2~3회 정도 걸리지만 반면 CFRC 시편은 섬유혼입량이 증가함에 따라 다소 차이가 있지만, 섬유길이가 12 mm이고 섬유혼입량 2% 인 경우 충격에 대한 저항성이 가장 높았다.

• 한국공작기계학회논문집
• /
• 제10권3호
• /
• pp.38-42
• /
• 2001

In the machining of glass fiber reinforced plastics(GFRP), turning has been often used. But the most of past studies have been interested in the effect of fiber orientation on tool wear. In this study, the effects of fiber contents and cutting speeds on tool wear, cutting force and surface roughness are investigated experimentally. By proper selection of cutting tool, the variables are cutting speed, fiber contents and cutting length with fixed feed rate and depth of cut. The fiber contents have major effects on coated tool wear which observed as abrasive wear type.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제21회 추계학술대회 논문집
• /
• pp.242-245
• /
• 2003

The purpose of this study is to investigate the shear modulus, the shear strength at failure and the failure process of QLS(quadruple-lap shear) Test specimen were made of two different fiber contents CFRR and HTPB based polyurethane matrix. The CFRR specimen were prepared with 6.16% chopped carbon fiber and 11.6% chopped carbon fiber. We carried out the shear tests for three types of specimen. The shear modulus and strength of the CFRR was inspected with the increasing contents of chopped carbon fiber. In the other hand the shear strain of the CFRR was inspected with the decreasing contents of chopped carbon fiber.