• 조명전기설비학회논문지
• /
• 제27권8호
• /
• pp.75-82
• /
• 2013

We propose a fiber grating sensor system for condition monitoring of large scale wind turbine blades. For the feasibility test of the proposed sensor system, a down-scaled wind turbine has been constructed and experimented. Fiber grating sensors were attached on a blade surface for distributed strain and temperature measurements. An optical rotary joint was used to transmit optical signals between the FBG sensor array and the signal processing unit. Instead of broadband light source, we used a wavelength-swept fiber laser to obtain high output power density. A spectrometer demodulation is used to alleviate the nonlinear wavelength tuning problem of the laser source. With the proposed sensor system we could measure dynamic strain and temperature profiles at multi-positions of rotating wind turbine blades.

• 한국정보통신학회논문지
• /
• 제18권8호
• /
• pp.2023-2028
• /
• 2014

본 논문에서는 광민감 광섬유와 일반 단일모드 광섬유로 제작된 광섬유 브래그 격자 센서의 감마방사선 영향을 분석하였다. 제작된 광섬유 브래그 격자는 $Co^{60}$ 감마선원을 이용하여 300 Gy/min의 선량률로 총선량 17.8 kGy 감마선을 조사하였다. 실험결과를 통하여 수소로딩을 하지 않은 광민감 광섬유로 제작된 브래그 격자가 가장 낮은 약 18 pm의 브래그 파장 이동을 보였다. 또한 방사선 조사에 의한 브래그 파장변화는 광섬유 코어의 $GeO_2$ 함량보다는 수소로딩 공정에 훨씬 큰 영향을 받는다는 것을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.631-634
• /
• 2005

This paper has been studied a optical fiber sensor offer important advantages such as electrically passive operation, EMI immunity, high sensitivity, and multi-plexing capabilities of this technology has been the characteristic. The shift in optical fiber Bragg wavelength with mass can be expressed. Using the shift in the optical fiber Bragg grating(FBG) center wavelength due to mass change.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.635-638
• /
• 2005

In this paper, we present thermal characteristics of a fiber Bragg grating(FBG) filter, including peak reflectivity, FWHM bandwidth, and wavelength shift by various refractive index change. The reflection spectrum of a FBG filter with refractive index change is affected by its thermal stability.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2002년도 하계학술발표회
• /
• pp.58-59
• /
• 2002

광섬유 격자(Fiber Bragg Grating)는 광통신 및 센서 분야에 매우 유용하다. 이를 이용한 센서는 온도, 스트레인 등을 측정 할 수 있어, 토목, 건설 및 항공분야에 지능형 구조물에 응용하고 있다. 본 논문에서는 이러한 광섬유 격자의 스트레인에 의한 응답특성을 이용한 동적 시스템을 구성하였으며, 광섬유격자에 하중을 인가하여 따른 응답 특성을 측정 분석하였다. (중략)

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.33-36
• /
• 2005

In this research, for the smart health monitoring of the hydrogen storage high pressure composite vessel, the feasibility study of an embedded fiber Bragg grating(FBG) sensor is carried out. To verify strain measurement in various temperature environment which is needed for the hydrogen pressure vessel, tensile test of a composite specimen with both an embedded FBG sensor and a strain gauge is made in low temperature. Before we try a real-size hydrogen storage pressure vessel, a small & cheap composite pressure vessel having the same structure is fabricated with embedded FBG sensors and tested. In the case of an aluminum liner inside the vessel, survivability of FBG sensors at the interface is lower than the other areas.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.235-239
• /
• 2005

In this research, we investigated the frequency characteristic of low-velocity impact induced damage signals on graphite/epoxy composite laminates using high-speed fiber Bragg grating(FBG) sensor system. Appling the FBG sensors to damage assessment, we need to study the response of FBG sensors as the damage signals of the different incident angles because FBG shows different directional sensitivity. In order to discriminate an impact induced damage signal from that of undamaged case, drop impacts with different energies were applied to the composite panel with different incident angle to the FBG sensor. Finally, detected impact signals were compared using frequency distributions of wavelet detail components in order to find distinctive signal characteristics of composites delamination.

• 한국항공우주학회지
• /
• 제30권3호
• /
• pp.130-138
• /
• 2002

수압실험 동안 광섬유 브래그 격자(FBG) 센서를 이용하여 필라멘트 와인딩된 복합재료 탱크의 변형률을 모니터링하였다. 20개의 FBG 센서와 20개의 스트레인 게이지를 복합재료 탱크의 돔과 실린더 부분에 부착하였다. 광섬유 센서를 위한 고출력 광원으로는 파장 이동 광섬유 레이저(WSFL)을 이용하였다. 실험결과로부터, 많은 수의 센서를 필요로 하는 대형 구조물의 건전성 모니터링에 FBG 센서 시스템이 유용함을 확인할 수 있었다.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.96-100
• /
• 2018

A tunable low-phase-noise microwave generation structure that utilizes an optoelectronic oscillator (OEO) and a fiber Bragg grating (FBG) is proposed and experimentally demonstrated in this article. This structure has no particular requirement for the band width of the laser, and its tunability is realized through adjusting the central frequency of the tunable FBG. A detailed theoretical analysis is established and confirmed via an experiment. A high-purity microwave signal with a frequency tunable from 6 to 12 GHz is generated. The single-sideband phase noise of the generated signal at 10.2 GHz is -117.2 dBc/Hz, at a frequency offset of 10 kHz.

• 대한전자공학회논문지SD
• /
• 제48권4호
• /
• pp.1-5
• /
• 2011

변형된 modified double weight code를 사용하여 효율적인 spectral-amplitude-coding optical CDMA를 구현하였다. 수신단의 optical decoder 앞에 fiber Bragg grating(FBG)을 사용하여 이 시스템의 주된 잡음인 phase-induced intensity noise(PIIN)를 대폭 줄여 향상된 시스템의 특성을 보일 수 있었다.