• KSBB Journal
• /
• v.5 no.1
• /
• pp.25-35
• /
• 1990

In the Xanthan gum fermentation by Xanthomonas campestris there are problems of the large energy consumption by long fermentation time, the mass transfer of oxygen and nutrients by high viscous fermentation broth. In this study, the media optimization and the fed batch fermentation were carried out to decrease fermentation time and increase Xanthan gum yield. The $O_2$ uptake rate (OUR) and $CO_2$ evolution rate(CER) which were obtained from the analysis of fermentation exit gas using a gas chromatograph were investigated. As a result, the fermentation time decreased at optimal assimilable nitrogen concentration but increased at poor or rich assimilable nitrogen concentration, the Xanthan gum biosynthesis was stimulated under the limited condition of assimilable nitrogen source and the optimum fermentation medium was obtained as follow; Glucose=30g / l, Peptone=8.0g / l, $K_2HPO_4=2.0g/l$, $MgS0_47H_2O=10g/l$, Sodium acetate=20g/l, Sodium pyruvate=0.5g/1. As the agitation speed and nitrogen concentration increased, the $O_2$ uptake rate and $CO_2$ evolution rate increased. The OUR and CER were 37.3mmol $O_2/\;l$ hr and 20.2 mmol $CO_2/\;L$ hr at peptone 11g / l and agitation speed 990RPM, respectively. In fed batch fermentation, the final concentration of Xanthan gum was enhanced up to 29g / l.

• Korean Journal of Food Science and Technology
• /
• v.34 no.1
• /
• pp.30-36
• /
• 2002

To use overproduction muskmelon effectively, muskmelon vinegar was prepared by two stage fermentations of alcohol and acetic acid. In the alcohol fermentation using muskmelon, alcohol content showed maximum value (7.47%) in $17.83^{\circ}Brix$ of initial sugar concentration and 82.65 h of fermentation time. Acetic acid content in alcohol fermentation revealed minimum value (0.46%) in $12.17^{\circ}Brix$ of initial sugar concentration and 60.56 h of fermentation time. The fermentation conditions for minimum residual sugar were $10.02^{\circ}Brix$ of initial sugar concentration and 105.61 h of fermentation time. The optimum conditions predicted for each corresponding physical properties of acetic acid fermentation were 200 rpm (agitation rate), 250 h (fermentation time) in acetic content and 200 rpm, 150 h in residual alcohol content.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.1
• /
• pp.102-106
• /
• 2005

This study was carried out to find the attributes for liquid-type yogurt with Lactobacillus casei 911LC during 72 h fermentation at $37^{\circ}C$. The pH decreased up to 32 h and plauteaued thereafter, and the titratable acidity increased up to 40 h. The growth of lactic acid bacteria sharply increased with $3.5{\times}10^7$ cfu/ml up to 40 h of fermentation and slowly decreased thereafter. The free amino acids produced during fermentation reached the maximum value at 44 h and gradually decreased thereafter. Bitterness sensory scores were the highest at 44 h of fermentation. In the result of electrophoresis, the band mostly disappeared at 72 h fermentation. The present data showed that the range of optimum fermentation time for liquid-type yogurt using Lactobacillus casei 911LC was from 40 to 44 h.

• Korean Journal of Food Science and Technology
• /
• v.35 no.4
• /
• pp.642-647
• /
• 2003

In order to investigate utilization possibility of persimmon peel as a source of vinegar, we had been examined the alcohol and acetic acid fermentations of persimmon peel. In the first stage, alcohol fermentation, alcohol content was maximum value (8.22%) in 12.43 mL/g of added water, $12.41^{\circ}Brix$ of initial sugar content and 48.05 hr of fermentation time. Acidity was minimum value (0.30%) in 12.18 mL/g of added water, $13.72^{\circ}Brix$ of initial sugar content and 46.22 hr of fermentation time. In the second stage, acetic acid fermentation, acidity was maximum value (6.40%) in 2.02% of initial acidity, 67.98 rpm of agitation rate and 6.94 day of fermentation time. Browning color was minimum value in 1.50% of initial acidity, 150.0 rpm of agitation rate and 6.0 day of fermentation time. To manufacture persimmon vinegar using persimmon peel, in the first stage, optimal alcohol fermentation conditions was 12mL/g in added water, $12^{\circ}Brix$ in initial sugar concentration and 48 hr in fermentation time. In the second stage, optimal acetic acid fermentation conditions was 1.8% in initial acidity, 70 rpm in agitation rate and 6 day in fermentation time using Acetobacter sp. PA97.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.301-301
• /
• 2022

Dairy products are important diet source for human because of their balanced essential nutrients along with various vitamins and minerals. However, lactose in milk can result in diarrhea to some consumers with lactose intolerance. Soy milk has no lactose and is suitable as a substitute for diary milk in accordance with recent trend of replacing animal food with vegetable food. However, polysaccharides in soy milks are difficult for humans to digest, leading to flatulence. These polysaccharides can be decomposed into monosaccharides by lactic acid bacteria, and fermentation can improve food quality. Because mungbean has higher carbohydrate content than soybean, mung milk can be easily fermented than soy milk, resulting in vege yogurt with higher contents of lactic acid. In this study, fermentation characteristics of vege yogurt were analyzed with different ratio of soy milk and mung milk (0%, 25%, 50%, 75%, 100% and 0%+sucrose) and different fermentation time (0, 8, and 16 hours). In general, pH decreased as fermentation time increased. Overall, pH significantly decreased when the mung milk content in yogurt increased. All samples showed higher titratable acidity after fermentation and soy yogurt (mungbean 0%, 16 hours) with sucrose showed the highest value (6.825%). As fermentation time increase, viscosity increased. In 8 and 16 hours, mung milk yogurt (mungbean 100%) showed the lowest viscosity while soy milk yogurt (soybean 100%) with no sucrose showed the highest viscosity after 16 hours of fermentation. The contents of crude protein, crude fat and ash were measured for nutritional analysis. Soy milk (mungbean 0%, 0 hours) had the values of crude protein 2.9g, crude fat 1.8g, and ash 0.3g, and mung milk (mungbean 100%, 0 hours), showed the values of crude protein 1.7g, crude fat 0g, and ash 0.3g. To analyze the effect of the differences in the contents of nutrition between soy milk and mung milk on fermentation, the changes in sugar contents, and antioxidant capacity will be conducted depending on fermentation time. Our results will provide the information in researching plant beverages.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.4
• /
• pp.371-378
• /
• 2019

This paper investigated the effects of the percentages of yeast and fermentation time as well as the top and bottom temperature of oven on the baking properties of rice bread. The specific volume of the dough decreased as the amount of added yeast and fermentation time increased. When 1.5% yeast was added at 60 min of fermentation time, the shape of the rice bread showed the largest volume, high appearance and a round shape. The top and bottom temperature of the oven on the baking characteristics of rice bread were affected by the baking time. When the top and bottom temperature of the oven at 200 and $140^{\circ}C$, and 200 and $170^{\circ}C$, the baking time was 20 min. When the top and bottom temperature of oven at 140 and $170^{\circ}C$, the baking time was 40 min. When the top and bottom temperature of the oven were 170 and $170^{\circ}C$, the shape of the rice bread indicated the largest volume, high appearance and a round shape. The results of this study revealed that the replacement of rice flour with 1.5% yeast, 60 min of fermentation time, and the top and bottom temperature of oven at $170-170^{\circ}C$ are effective for rice bread.

• Journal of Life Science
• /
• v.18 no.4
• /
• pp.556-564
• /
• 2008

Response surface methodology was used to monitor the optimization of fermentation conditions for red ginseng wine. A central composite design was applied to investigate the effects of independent variables, fermentation temperature ($X_1$), fermentation time ($X_2$) and initial pH ($X_3$) on dependent variables, physicochemical characteristics and effective ingredients. Alcohol and total sugar content were significantly affected both by fermentation temperature and time. Crude saponin content was greatly affected by fermentation time, and pH was significantly affected by initial pH. Fermentation time and initial pH had a greater effect on ginsenoside content than fermentation temperature. Ginsenoside content increased along with fermentation time and initial pH. We elicited a regression formula for each variable, and superimposed the total optimum points of fermentation conditions for physicochemical characteristics and the effective constituents. The predicted values at the optimum fermentation conditions were at $21{\sim}27^{\circ}C$ for $15{\sim}20$ day in initial pH $4.6{\sim}5.2$.

• Food Science and Biotechnology
• /
• v.16 no.5
• /
• pp.812-816
• /
• 2007

To overcome the problem of ginseng's earthy smell in the manufacture of ginseng wine, we used dried ginseng powder that was extrusion-cooked at $125-168^{\circ}C$ in the wine making process. By using a ginseng powder that was extrusion-cooked at higher temperatures, fermentation by Maillard reaction products (MRPs) was delayed, and the acidic pH that results from extrusion cooking was improved. At $15^{\circ}C$ with glucose instead of sucrose, an addition of 0.5%(w/v) diammonium phosphate (DAP) to the $125^{\circ}C$ extrusion-cooked ginseng powder reduced the primary fermentation time to 11 days versus 33 days without DAP. In the absence of DAP, by increasing the fermentation temperature from 15 to $30^{\circ}C$, increasing the starter yeast inoculate from 0.02 to 1 %, and by increasing the amount of ginseng extrudate from 1 to 2%, fermentation time was effectively reduced more than 10-fold. The results of this study may provide information for the alcohol fermentation of materials containing MRPs as well as for poor nitrogen sources.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.460-465
• /
• 2001

To prepare vinegar using concentration apple juice, response surface methodology (RSM) was applied to optimize and monitor the vinegar fermentation properties by two stage fermentation. In the first stage, the optimum conditions for maximum alcohol contents were 18.56。Brix of initial sugar concentration, 61.96 rpm of agitation rate and 67.32 hr of fermentation time. The optimum condition for maximum acidity in the second stage (vinegar fermentation) were 201.53 rpm of agitation rate and 179.42 hr of fermentation time. Malic acid content was the highest and its content little changed during acetic acid fermentation. Lactic acid content increased a little during alcohol fermentation. Acetic acid content apparently increased during acetic acid fermentation.

• Journal of the East Asian Society of Dietary Life
• /
• v.13 no.2
• /
• pp.122-129
• /
• 2003

This study was carried out in order to investigate the dextran formation and the internal structure of the chitosan-oligisaccharide(COS) Jeung-Pyun during the fermentation. To develop a functional Jeung-Pyun, COS was added to the rice at the level of 0, 2, 4, and 6% to the 2-hour-soaked rice. The pH, dextran and reducing sugar contents of COS batter, specific volume and the internal structure of COS were analyzed as a function of fermentation time. The specific volume of COS peaked at the 3 hour fermentation. The pH values of COS batters reduced with the fermentation time. The dextran content of the control batters peaked at the 7 hour fermentation. In contrast, the dextran contents of COS batters reduced up to 7th hour of fermentation, and then increased slowly until 20th hour of the fermentation process. From the air pore size and distribution of COS observed by SEM, the COS fermented fur 3 hour was judged as the best. It was concluded that COS prevented the fermation of dextran at the early stage of fermentation process.