• Journal of Microbiology and Biotechnology
• /
• 제3권3호
• /
• pp.204-208
• /
• 1993

A fully automatic image analysis method was applied to obtain detailed data on morphological parameters of a glucoamylase fermentation broth with Aspergillus niger No. PFST-38. a mutant strain for glucoamylase hyperproducer. In the initial stage of fermentation. there was an increase in hyphal length. whereas at the end of the fermentation a decrease in hyphal length and increase in hyphal thickness were observed. The percentage of clumps declined with dilution and the influence of shear stress upon hyphal length was negligible. It was found that the slower the decrease in the main hyphal length and the number of tips with the fermentation time. the higher the glucoamylase production rate was recorded. The production rate of glucoamylase was closely related to the increase in the hyphal thickness.

• 동아시아식생활학회지
• /
• 제13권6호
• /
• pp.601-607
• /
• 2003

This study was attempted to investigate the physicochemical changes during soybean-leaf water kimchis fermentation by adding wheat flour in cooking water. Soybean-leaf water kimchis with five different levels of wheat flour in cooking water(0%;A, 5%;B 10%;c, 15%;D, 20%;E) were tested for rhological parameters, fine structural changes, sensory evaluations and chemical analysis. The composition of the soybean-leaf was moisture (80.9%), protein(6.8%), fat(0.6%), ash(2.1%) and alkalinity (+14.9). The amount of reducing sugars of sample A and other samples were 0.75% and 1.08∼1.4% in the initial fermentation stage, but decreased to 0.3 and 0.43∼0.50% in the later fermentation stage, respectively. The pH of sample A decreased from 5.17 to 4.72 during the initial fermentation. On sample B, C, D and E, pH's decreased rapidly during the initial fermentation, but they did not change much in the later fermentation stage. The pectin contents of all samples decreased during 2nd and 4th day of fermentation, then the change was slow. The amount of hemicellulose. cellulose and lignin in terms of the DNF and ADF were varied from 4 to 33%, but the contents of them did not greatly changed during the fermentation. The sensory evaluation showed that both B and C samples had the good score in sweety taste, roasted nutty taste, and the ease of swallowing measured as chewiness. From these results, the optimum soybean-leaf water kimchis can be prepared when 200g soybean-leaf, 1000$m\ell$ water, 15g garlic, 3% red pepper powder and 5 ∼0% wheat flour were fermented at 20$^{\circ}C$ for 2 days.

• 한국축산식품학회지
• /
• 제33권3호
• /
• pp.325-330
• /
• 2013

Kefir is traditional fermented milk produced by various lactic acid bacteria (LAB) and yeast, which produce lactic acid, ethanol, carbon dioxide, and other flavor compounds. The purpose of this study was to evaluate the effects of different commercial oligosaccharides, such as maltotriose, fructooligosaccharide (FOS), galactooligosaccharide (GOS), and isomaltooligosaccharide (IMO), on the fermentation properties of kefir. First, we determined the acidification kinetic parameters, such as $V_{max}$, $t_{max}$(h), $t_{pH5.0}$(h), and $t_f$(h) of fermented milk supplemented with 4% (w/w) of different oligosaccharides. The probiotic survival and chemical composition (pH, organic acids profile, and ethanol content) of kefir during fermentation were also measured. Compared to control fermentation, all oligosaccharides increased acidification rate and reduced the time to complete fermentation (pH 4.7). The addition of FOS, in particular, resulted in the lowest $t_f$(h) and the highest populations of LAB and yeast during fermentation. All oligosaccharides increased ethanol production during fermentation. Further, significant differences were observed in the formation rates of six organic acids during fermentation. This study provided comparative data on the properties of commercial oligosaccharides for kefir manufacturing. Consequently, FOS especially had the potential for adequate and effective oligosaccharides in commercial kefir for the improvement of cost- and time-effectiveness.

• Journal of Microbiology and Biotechnology
• /
• 제24권6호
• /
• pp.781-787
• /
• 2014

2-Ketogluconic acid production by Klebsiella pneumoniae is a pH-dependent process, strictly proceeding under acidic conditions. Unfortunately, cell growth is inhibited by acidic conditions, resulting in low productivity of 2-ketogluconic acid. To overcome this deficiency, a two-stage fermentation strategy was exploited in the current study. During the first stage, the culture was maintained at neutral pH, favoring cell growth. During the second stage, the culture pH was switched to acidic conditions favoring 2-ketogluconic acid accumulation. Culture parameters, including switching time, dissolved oxygen levels, pH, and temperature were optimized for the fed-batch fermentation. Characteristics of glucose dehydrogenase and gluconate dehydrogenase were revealed in vitro, and the optimal pHs of the two enzymes coincided with the optimum culture pH. Under optimum conditions, a total of 186 g/l 2-ketogluconic acid was produced at 26 h, and the conversion ratio was 0.98 mol/mol. This fermentation strategy has successfully overcome the mismatch between optimum parameters required for cell growth and 2-ketogluconic acid accumulation, and this result has the highest productivity and conversion ratio of 2-ketogluconic and produced by microorganism.

• Food Science and Biotechnology
• /
• 제15권5호
• /
• pp.664-671
• /
• 2006

Modeling the growth kinetics of lactic acid bacteria (LAB), one of the most valuable microbial groups in the food industry, has been actively pursued in order to understand, control, and optimize the relevant fermentation processes. Most modeling approaches have focused on the development of single population models. Primary single population models provide fundamental kinetic information on the proliferation of a primary LAB species, the effects of biological factors on cell inhibition, and the metabolic reactions associated with cell growth. Secondary single population models can evaluate the dependence of primary model parameters, such as the maximum specific growth rate of LAB, on the initial external environmental conditions. This review elucidates some of the most important single population models that are conveniently applicable to the LAB fermentation analyses. Also, a well-defined mixed population model is presented as a valuable tool for assessing potential microbial interactions during fermentation with multiple LAB species.

• Journal of Microbiology and Biotechnology
• /
• 제19권11호
• /
• pp.1385-1392
• /
• 2009

This work evaluates the effect of different amino acids on production of Cyclosporin (CyA) production in solid-state fermentation that was previously optimized for different fermentation parameters by one factor at-a-time for the maximum production of CyA by Tolypocladium inflatum MTCC557. Based on the Plackett-Burman design, glycerol, ammonium sulfate, $FeCl_3$, and inoculum size were selected for further optimization by response surface methodology (RSM). After identifying effective nutrients, RSM was used to develop mathematical model equations, study responses, and establish the optimum concentrations of the key nutrients for higher CyA production. It was observed that supplementation of medium containing (% w/w) glycerol, 1.53; ammonium sulfate, 0.95; $FeCl_3$, 0.18; and inoculum size 6.4 ml/5g yielded a maximum of 7,106 mg/kg as compared with 6,480 mg CyA/kg substrate using one factor at-a-time. In the second step, the effect of amino acids on the production of CyA was studied. Addition of $_L$-valine and $_L$-leucine in combination after 20 h of fermentation resulted in maximum production of 8,166 mg/kg.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제1권1호
• /
• pp.22-25
• /
• 1996

An Exponetial feeding strategy has been frequently used in fed-batch fermentation of recombinant E. coli. In this feeding scheme, growth yield and initial cell concentration, which can be erroneously determined, are needed to calculate the feed rate for controlling specific growth rate at the set point. The effect of the incorrect growth yield and initial cell concentration on the control of the specific growth rate was theoretically analyzed. Insignificance of the correctness of those parameters for the control of the specific growth rate was shown theoretically and experimentally.

• 한국미생물·생명공학회지
• /
• 제28권5호
• /
• pp.298-302
• /
• 2000

Fermentation parameters were estimated by use of a vent gas analyzer coupled to a computer data acquisition system in cultivation of Phellinus linteus WI-001, pro-ducer of polysaccharides known to have potent anticancer activities. Oxygen uptake rate(OUR), a critical indicator of the cells activities, was calculated by applying oxygen mass balance. In addition, by dividing the oxygen uptake rate hy the total oxygen consumed, on-line estimation of the cells specific growth rate was successfully done. It was also possible to estimate cell concentration directly bt use of oxygen-cell yield($Y_{x/o}$ ) which was obtained based on a correlation between cell growth and total oxygen consumed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권2호
• /
• pp.204-213
• /
• 2008

Four ruminally cannulated Holstein cows averaging 43 days in milk (DIM) were used in a $4{\times}4$ Latin square to determine the effect of feeding extruded soybean, ground canola seed and whole cottonseed on ruminal fermentation and milk fatty acid profile. One hundred and twenty lactating Holstein cows, 58 (${\pm}31$) DIM, were assigned to four treatments in a completely randomized block design to study the effects of the three types of oilseeds on production parameters and milk fatty acid profile. The four diets were a control diet (CON) and three diets in which 10% extruded soybean (ESB), 5% ground canola seed (GCS) and 10% whole cottonseed (WCS) were included, respectively. Diets consisted of concentrate mix, corn silage and Chinese wild rye and were balanced to similar concentrations of CP, NDF and ADF. Ruminal fermentation results showed that ruminal fermentation parameters, dry matter intake and milk yield were not significantly affected by treatments. However, compared with the control, feeding cows with the three oilseed diets reduced C14:0 and C16:0 and elevated C18:0 and C18:1 concentrations in milk, and feeding ESB increased C18:2 and cis9, trans11 conjugated linoleic acid (CLA). Production results showed that feeding ESB tended to increase actual milk yield (30.85 kg/d vs. 29.29 kg/d) and significantly decreased milk fat percentage (3.53% vs. 4.06%) compared with CON. Milk protein (3.41%) and solid non-fat (13.27%) from cows fed WCS were significantly higher than from cows fed CON (3.24% and 12.63%, respectively). Milk urea N concentrations from cows fed the ESB (164.12 mg/L) and GCS (169.91 mg/L) were higher than cows fed CON (132.31 mg/L). However, intake of DM, 4% fat corrected milk, energy corrected milk, milk fat and protein yields, milk lactose percentage and yield, somatic cell count and body condition score were not affected by different treatments. The proportion of medium-chain fatty acid with 14 to 16 C units in milk was greatly decreased in cows fed ESB, GCS and WCS. Feeding ESB increased the concentration in milk of C18:1, C18:2, C18:3 and cis9, trans11-CLA content by 16.67%, 37.36%, 95.24%, 72.22%, respectively, feeding GCS improved C18:0 and C18:1 by 17.41% and 33.28%, respectively, and feeding WCS increased C18:0 by 31.01% compared with feeding CON. Both ruminal fermentation and production trial results indicated that supplementation of extruded soybean, ground canola seed and whole cottonseed could elevate the desirable poly- and monounsaturated fatty acid and decrease the medium chain fatty acid and saturated fatty acid content of milk fat without negative effects on ruminal fermentation and lactation performance.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권10호
• /
• pp.1528-1539
• /
• 2019

Objective: To evaluate the effects on microbial diversity and biochemical parameters of gradually increasing temperatures, from $5^{\circ}C$ to $25^{\circ}C$ on corn silage which was previously fermented at ambient or low temperature. Methods: Whole-plant corn silage was fermented in vacuum bag mini-silos at either $10^{\circ}C$ or $20^{\circ}C$ for two months and stored at $5^{\circ}C$ for two months. The mini-silos were then subjected to additional incubation from $5^{\circ}C$ to $25^{\circ}C$ in $5^{\circ}C$ increments. Bacterial and fungal diversity was assessed by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) profiling and biochemical analysis from mini-silos collected at each temperature. Results: A temperature of $10^{\circ}C$ during fermentation restricted silage fermentation compared to fermentation temperature of $20^{\circ}C$. As storage temperature increased from $5^{\circ}C$ to $25^{\circ}C$, little changes occurred in silages fermented at $20^{\circ}C$, in terms of most biochemical parameters as well as bacterial and fungal populations. However, a high number of enterobacteria and yeasts (4 to $5\;log_{10}$ colony forming unit/g fresh materials) were detected at $15^{\circ}C$ and above. PCR-DGGE profile showed that Candida humilis predominated the fungi flora. For silage fermented at $10^{\circ}C$, no significant changes were observed in most silage characteristics when temperature was increased from $5^{\circ}C$ to $20^{\circ}C$. However, above $20^{\circ}C$, silage fermentation resumed as observed from the significantly increased number of lactic acid bacteria colonies, acetic acid content, and the rapid decline in pH and water-soluble carbohydrates concentration. DGGE results showed that Lactobacillus buchneri started to dominate the bacterial flora as temperature increased from $20^{\circ}C$ to $25^{\circ}C$. Conclusion: Temperature during fermentation as well as temperature during storage modulates microorganism population development and fermentation patterns. Silage fermented at $20^{\circ}C$ indicated that these silages should have lower aerobic stability at opening because of better survival of yeasts and enterobacteria.