• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.9-15
• /
• 2000

• 한국축산시설환경학회지
• /
• 제7권1호
• /
• pp.1-12
• /
• 2001

조기이유 자돈용 액상사료 지동 급이기를 개발하기 위하여 물 가열 및 배출부, 가루사료 저장 및 배출부, 혼합부, 약상사료 이송부와 이들의 각 기능을 제어하는 중앙 제어부 및 급이기로 구성 하였다. 이러헥 개발한 조기이유 자돈용 액상사료 자동급이기의 실용성을 검토하기 위해 평균 19일령에 이유한 삼원교잡종(Lw$\times$D)ㅈ돈 18두(남9,여9)를 공시하여 3주 동안 액상으로 급여한 후 3주 동안 가루사료를 무제한 급여하였다. 결과는 아래와 같다. 개발한 액상사료 자동 급이기의 물 가열 및 배출부는 혼합부에 온수를 초당 27$m\ell$, 가루사료 저장 및 배출부는 가루사료를 초당 3.7g 씩 정확하게 중앙제어부의 작동에 따라 이송하였다. 일당증체량은 NRC의 표준 성장률과 비교해 액상사료를 급여한 3주 동안 자돈들이 10%정도 낮은 수준이었으나, 그후 가루사료를 급여한 3주 동안에는 24%, 시험전기간 17% 정도 높은 수준이었다. 사료요구율은 시험개시 후 3주 동안 1.09, 그 후 3주동안 2.14, 시험전기간에는 1.89 이었다. 설사 발생은 액상사료 급여후 3일부터 7일 까지 5일동안 발생하였고, 폐사 자돈은 없었다. 새로이 개발한 액상사료 자동 급이기 시작품의 성능 검정을 위한 예비적 시험으로 19일령에 이유한 자돈에게 적용해 본결과, 액상사료 자동급이기는 어떠한 문제없이 잘 작동되었으며, 자돈들의 액상사료 급여 초기 성장은 부진하였으나 차후 성장 촉진과 사료 이용율이 개선되는 것으로 나타났다. 따라서 본 연구에서 새로이 개발한 액상사료 자동 급이기를 이용한 자돈 사육이 가능할 것으로 사료 된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.937-940
• /
• 1992

A cost-saving feeding rate contro method for a batch reaction process is proposed by reconfigurating the flow rate control loop where the feeding rate is estimated by differentiating weight measurement. While the existing control methods require either a flow rate measurement device or a flow rate estimator, the proposed method is devised not to require neither of these facilities by directly controlling the tank weight with a time-varying set point. Experimental evaluation in a pilot-scale unit shows that the proposed method can significantly reduce the actuator hunting of the existing method where the flow rate is estimated by differentiating the weight measurement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.557-558
• /
• 2006

In this study, the ultra precision centerless grinder for ferrule grinding was designed. As the good-qualified ferrule is required a precise and fine grinding, grinding machine for ferrule must have a high accuracy and a sufficient stiffness. The centerless grinder is composed of the high damping concrete bed, grinding wheel spindle unit, regulating wheel spindle unit, feeding table and dressing unit. For a newly developed centerless grinder, hydrostatic system with high precision feeding and high stiffness was proposed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권5호
• /
• pp.655-667
• /
• 2001

This experiment was conducted to investigate the effect of feeding a low CP diet supplemented with synthetic amino acids on performance, nutrient utilization and carcass characteristics of finishing pigs fed under a three-phase feeding regimen. Ninety-six finishing pigs (Landrace$\times$Large White$\times$Duroc), $55.75kg{\pm}0.65$ of initial body weight, were blocked by weight and sex and allotted to four dietary treatments in a randomized block design. There were six pens per treatment and four pigs per pen. Pigs were fed a 16%-14%-12% CP (for phase I-II-III, respectively), sequence of diets. Dietary treatments were 1) Control, 2) Con+L (a sequence of diets reduced in CP by l percentage unit with lysine (L) supplementation, 3) Con+LMT (a sequence of diets reduced in CP by 2 percentage unit with LYS, methionine (MET) and threonine (THE) supplementation) and 4) Con+LMTT (a sequence of diets reduced in CP by 3 percentage unit with LYS, MET, THR and tryptophan (TRP) supplementation). The finishing period (55 to 105 kg) was divided into three phases (55 to 72 kg, 72 to 90 kg and 90 to 105 kg). Pigs fed either the control or Con+L diet grew faster (p<0.05) than pigs fed the Con-LMT or Con+LMTT diet. There was no difference in ADFI among dietary treatments. Phosphorus (P) digestibility was lowest in the control group and highest in the Con+LMTT group (p<0.05). Within each phase, no significant differences in dry matter (DM) and CP digestibilities were found. Although some amino acid digestibilities were affected by dietary treatments, digestibilities of essential amino acids (EAA), non-essential amino acids (NEAA) and total amino acid were not significantly influenced by dietary treatments. For the entire experiment periods, Con+L, Con+LMT and Con+LMTT treatments resulted in 13.4, 18.8 and 21.6% lower total N excretion compared with the control. Con+LMT and Con+LMTT treatments showed significantly lower BUN concentration compared with the control and Con+L treatment (p<0.05), but there was no significant difference in BUN concentration between pigs fed the control and Con+L treatment or between pigs fed Con+LMT and Con+LMTT treatments (p>0.05). Carcass length, backfat thickness and carcass grade were not significantly affected by dietary treatments (p>0.05). In conclusion, reducing dietary CP level by 1 percentage unit and supplementing only LYS at each phase could be a very beneficial feeding strategy for finishing pigs fed under a three phase feeding regimen in terms of both environmental and economical aspects.

• 대한영양사협회학술지
• /
• 제7권3호
• /
• pp.217-226
• /
• 2001

It is important to supply adequate nutrition to critically ill patients, whose gastrointestinal system is properly functioning, through the enteral tube feeding if oral intake is impossible. In this study we investigated the changes in nutritional status with enteral tube feeding according to the volume required. We investigated the volume ordered according to the patient's requirements, volume infused according to the volume ordered in 41 enteral tube feeding patients in intensive care unit from Jannuary to July, 2000. Body weight, serum albumin level, and total lymphocyte count were evaluated to assess nutritional status. The mean fasting period was 5 days before the enteral feeding and patients whose fasting period over 3 days were 51%. The mean enteral tube feeding period was 29 days and method of feeding was nasogastric, bolus feeding 6 times per day. The volume ordered was 69.7% of the patients' recommended calorie and volume infused was 86.6% of their volume prescribed. Accordingly, the volume infused was estimated 61.7% of their volume required. Only 44.6% of their reqiured volume was infused within 3 days after enteral tube feeding was started. It took 16 days in average to meet the patients' recommended calorie; 56% of subjects still did not fully met their requirements by the end point. Among the impeding factors in supplying enteral tube feeding, factors related to the number of feeding were high residual volume in stomach, vomiting, gastrointestinal bleeding, abdominal distension and surgery. Factors related to the acctual infused volume were diarrhea, gastrointestinal bleeding, abdominal distension, airway management and tube reinsertion. Significant correlations were shown between the volume infused and changes in both the patients' weight and serum albumin level. Deviding the subjects into two groups by their infused volume, less than 70% and more than that, we compared the two to come up with a significant difference in their serum albumin level, -0.23 vs 0.21, and their body weight, -4.52 vs 0.12. In enteral tube feeding, the volume delivered in sufficient to the pateints' energy requirement can affect their nutriitional status in critically ill patient; adequate nutritional management plan is essential. It is necessary to make every effort to educate clinical staff and to set up a unified management program to prescribe adequate ammount of energy for the patient's nutritional requirement.

• 한국항공우주학회지
• /
• 제42권12호
• /
• pp.1051-1056
• /
• 2014

소형인공위성에 적용을 목적으로 전기추진시스템의 연료공급부가 개발되었다. 연료공급부는 연료로 사용되는 제논을 높은 압력과 밀도의 가스상태로 저장하게 된다. 제논은 상온에서 임계점을 갖는데 발사환경에서 과도상태로 시스템에 영향을 미칠 수 있다. 따라서 발사환경에 대한 본 시스템의 기능적 구조적 안정성은 지상시험을 통한 검증이 필요하다. 본문에서는 연료공급부의 설계점과 검증시험내용을 논하고 시험결과를 정리하였다. 검증시험을 통해 본 시스템이 발사환경에 대하여 안정성을 확보하고 있는 것을 확인하였다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1997년도 동계 학술대회 논문집
• /
• pp.121-127
• /
• 1997

• 한국결정학회지
• /
• 제7권2호
• /
• pp.147-155
• /
• 1996

할로겐 램프를 열원으로 이용하는 결정성장장치인 부유대역융로를 제작하여 고온초전도체 Bi2Sr2CaCu2O8의 성장에 이용하였다. 제작된 결정성장장치는 할로겐 램프를 초점에 위치시키기 위한 holder unit, 1kW의 할로겐 램프로서 최대 1800℃까지 사용이 가능한 image furnace, 냉각장치, 원료 물질을 공급하는 feeding unit, 성장된 단결정을 인상하는 pulling unit, 그리고 2mm/hr - 40mm/hr의 속도로 상하 이동 및 15rpm -120rpm의 회전이 가능한 제어부 등으로 구성되었다. 300W의 할로겐 램프를 이용하여 Bi2Sr2CaCu2O8 fiber를 성장시켰으며 성장된 fiber는 XRD, SEM, EDS 등으로 분석하였다. 성장조건은 공기분위기에서 성장속도 3∼4mm/hr, 상·하부축 회전속도 20∼25 rpm이었으며 성장된 fiber는 Bi2Sr2CaCu2O8 기지 내에 (Sr,Ca)CuO2 및 (Sr,Ca)2CuO3의 2차상을 포함하고 있었다.

• 기본간호학회지
• /
• 제16권1호
• /
• pp.21-29
• /
• 2009

Purpose: The purpose of this study was to identify the nutritional status and to compare nutritional indicators by caloric intake for intensive care unit patients, Methods: The participants for this descriptive investigation were 62 patients who were admitted to medical and surgical ICUs and started on enteral feeding. Data were collected in a tertiary hospital and the patients were followed for 7 days after enteral feeding was initiated. For analysis, patients who received 80% less calories than their required level were categorized as the underfed group and patients who received more than 80% to their required level, as the adequately fed group. Results: Compared to daily requirements, the prescribed calories and protein for patients overall were 77.39% and 64.75% respectively. The level of calories and protein given was less than their prescription. However, a comparison of the underfed group and the adequately fed group, showed that there was no significantly difference in albumin, prealbumin and transferrin. Only body weight was significantly different between the groups. C-reactive protein had a significant correlation with prealbumin and transferrin. Conclusion: Underfeeding is a common phenomenon among ICU patients. Nutritional indicators such as prealbumin, albumin and transferrin may not sensitive indicators to assess nutritional status of ICU patients.