• 한국생산제조학회지
• /
• 제19권5호
• /
• pp.596-602
• /
• 2010

In this study, a fmite element model was developed for analysis of feeding a structure in open loop control The finite element analysis (FEA) can simulate dynamic behavior of the structure of a machine tool rapidly traveling with a screw feeding driving system. The feeding mechanism was implemented with screw element of the FEA tool used in this study. The procedure was developed for the dynamic transient FEA. First, motion parameters such as jerk and velocity were introduced for the structure to be fed in open loop control When its traveling distance was determined, set-points for the distance were generated based on the motion parameters. The set-points were applied to the FE model constructed for the traveling structure. The FEA was executed and evaluated. In this study, the FEA procedure was applied to the column of a machine tool and the dynamic behavior of the column was evaluated. The FEA helps in evaluation of the motion characteristics of a structure. The convergence time of the structure vibration posterior to feeding termination can be estimated and the stiffness of the flexible structure is also evaluated against jerk, and acceleration. It provides the feeding force which is helpful in selection of the feeding motor.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1997-2004
• /
• 2011

The $2{\times}25kv$ AT electric power feeding method in the A.C. electric train adopts the one-phase power feeding method as the standard due to a voltage phase difference, and the distance between the two neighboring substations is 50km due to voltage drop. The one-phase power feeding method makes the system operation feasible, while making it unfavorable for power supply. Moreover, railroad involves large-capacity single-phase load, and if it is expected to continue to rise, it is necessary to research on measures to stabilize the supply of power to railroad cars with the existing facilities. In this study, a parallel power feeding method between neighboring substations is proposed to stabilize the supply of electric power to electric railroad cars under the 2*25kv AT power feeding method and the loop current induced by voltage phase difference between the two neighboring substations during parallel power feeding is investigated.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2017년도 추계학술대회
• /
• pp.55-56
• /
• 2017

본 논문에서는 동일면 도파관(CPW; coplanar waveguide) 급전 방식을 이용하여 실내 디지털 TV(DTV)용 광대역 루프 안테나를 설계하였다. 제안된 루프 안테나는 정사각형 루프와 중앙 급전점을 연결하는 두 개의 원형 섹터로 구성되며, 아래쪽 원형섹터에 CPW 급전선로가 삽입된 형태이다. CPW 급전선로는 DTV응용을 위해 75옴 포트 임피던스와 정합하도록 설계되었으며, 중간 주파수 대역에서 임피던스 정합을 개선하기 위한 슬롯이 접지면에 추가되었다. 최적화된 안테나를 FR4 기판에 제작하고 특성을 실험한 결과, 전압 정재파비(VSWR; voltage standing wave) < 2인 대역이 463-1,280 MHz으로 DTV 대역에서 동작하는 것을 확인하였다.

• 한국군사과학기술학회지
• /
• 제9권1호
• /
• pp.144-151
• /
• 2006

A rectangular loop antenna for S-band radar is proposed. The proposed loop antenna is the modified type of folded monopole antenna. The feeding line is coplanar stripline with $180^{\circ}$ phase difference for operating in odd mode. The proposed antenna showed return loss of -15.57dB at the center frequency and bandwidth of about 790MHz (> 25%) under the condition of VSWR < 2. The gains of single, 1x2, and 1x4 array loop antennas are 4.3, 7.0, and 10.2dBi, respectively.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.269-275
• /
• 1997

This paper presents real time digital signal processor(DSP) control of UPS system feeding processor(DSP) control of UPS system feeding nonlinear loads to provide sinusoidal inverter output voltage. The control scheme is composed of an rms voltage compensator, the load current harmonics feed-forward loop for the cancellation of output voltage harmonics, and the output voltage harmonics feedback loop for system stability. The controller employs a Texas Instruments TMS320C40GFL50 DSP.

• 한국전자파학회논문지
• /
• 제21권10호
• /
• pp.1103-1108
• /
• 2010

본 논문에서는 PIFA의 급전점과 단락점을 둘러싸는 급전 루프 내부에 커패시터 구조를 삽입하는 새로운 타입의 4중 대역(GSM900/DCS/PCS/W-CDMA) PIFA 설계를 제안한다. 커패시터의 삽입을 통해서 병렬 공진점인 2.01 GHz에서의 반사 계수 -2.73 dB를 -6.26 dB로 낮추는 효과를 얻을 수 있었다. 병렬 공진에서의 좋지 못한 방사 특성을 개선시킴으로써 고차 대역(DCS/PCS/W-CDMA)에서의 광대역 특성을 나타내었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.563-568
• /
• 1999

Generally the control method of wire feeding motor in welding machine has been used full-wave phase control method. The fire-angle control generates low frequency speed ripple, and it causes the output current ripple. So it results in the variation of welding condition and low welding performances such as spatter generation and bead state. For the purpose of welding performances improvement by speed controller in wire feeding motor, in this paper the constant speed control method for welding machine is proposed. The proposed system is composed of speed control loop and current control loop. As a result of experiment by using proposed constant wire feed experiment by using proposed constant wire feed speed controller, the output voltage and current waveform and metal transfer are maintained stably. And moreover the number of instantaneous short circuit occurrence is reduced remarkably.

• Journal of electromagnetic engineering and science
• /
• 제18권2호
• /
• pp.129-135
• /
• 2018

This paper proposes a design of small controlled reception pattern antenna (CRPA) arrays using circular microstrip loops with frequency-insensitive characteristics. The proposed array consists of seven identical upper and lower circular loops that are electromagnetically coupled, which results in a frequency-insensitive behavior. To demonstrate the feasibility of the proposed feeding mechanism, the proposed array is fabricated, and its antenna characteristics are measured in a full-anechoic chamber. The operating principle of the proposed feeding mechanism is then interpreted using an equivalent circuit model, and the effectiveness of the circular loop shape is demonstrated by calculating near electromagnetic fields in proximity to the radiator. The results confirm that the proposed feeding mechanism is suitable to have frequency-insensitive behavior and induces strong electric and magnetic field strengths for higher radiation gain in extremely small antenna arrays.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.937-940
• /
• 1992

A cost-saving feeding rate contro method for a batch reaction process is proposed by reconfigurating the flow rate control loop where the feeding rate is estimated by differentiating weight measurement. While the existing control methods require either a flow rate measurement device or a flow rate estimator, the proposed method is devised not to require neither of these facilities by directly controlling the tank weight with a time-varying set point. Experimental evaluation in a pilot-scale unit shows that the proposed method can significantly reduce the actuator hunting of the existing method where the flow rate is estimated by differentiating the weight measurement.

• 한국통신학회논문지
• /
• 제19권12호
• /
• pp.2508-2519
• /
• 1994

본 논문은 국내 ISDN 망에서 상용전원 이상시에도 최소한의 음성서비스를 보장하기 위한 방법으로 망급전과 재충전 배터리를 사용하는 방안을 검토하였다. 망급전의 경우에서는 요구되는 선로전압 및 선로전류 등을 선로 종류 및 급전전력에 따라 시뮬레이션을 수행하였다. 이러한 시뮬레이션의 결과로서 현재 국내 ISDN 가입자 선로를 교체하지 않고는 망급전이 불가능한 것으로 나타났다. 따라서 급전 방법으로는 재충전 배터리 사용이 타당한 것으로 판단되며, 재충전 배터리 사용시에는 선로매듭에서 발생하는 부식에 의하여 접촉저항이 증가하는 문제를 해결하기 위하여 별도의 전류를 사용할 필요가 있다. 이러한 전류를 실링(sealing) 전류라 하는데 국내에서 개발된 ISDN 교환기의 가입자보드에서 실링전류 및 망급전 용으로 설치된 급전용 전력조정기를 사용하여 실험하였다. 실험 결과 실링 전류의 공급이 물리계층의 클럭동기에 영향을 주지 않으며, 매우 짧은 시간동안만 실링전류의 영향이 나타남을 확인하였다. 이러한 실링전류의 실험결과는 선로를 간략하게 모델링하여 시뮬레이션 한 결과와 완전히 일치하는 것으로서 실험이 정당함을 시뮬레이션으로 확인하였다.