• Journal of Microbiology and Biotechnology
• /
• v.14 no.1
• /
• pp.68-73
• /
• 2004

Ferritin is an iron storage protein found in most living organisms. For expression and industrial use, human light chain ferritin (L-ferritin) was cloned from human liver cDNA library and expressed in Pichia pastoris strain GS115. The recombinant L-ferritin in Pichia pastoris was glycosylated. In a fed-batch culture, the cell mass reached about 57 g/l of dry cell weight, and the L-ferritin in the cell was increased to about 95 mg/l after 150 h. In an atomic absorption spectrometry analysis, the intracellular content of iron in the L-ferritin transformant was measured as $1,694{\pm}85\;\mu\textrm{g}g/g$, which is 5.4-fold more than that of the control strain. This L-ferritin transformant could serve as iron-fortified nutrients in animal feed stock.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.218-219
• /
• 2007

Silicon feed stock shortage have acted as major restraints for growth of photovoltaic industry. Concentrating photovoltaic (CPV) system will reduce the use of silicon PV materials. This paper presents the application possibility of mono-crystalline silicon solar cell, which has increased in market share, for PV concentrator. We measured the power of solar cell using sun simulator and I-V curve tracer and compared the results. The comparison of results showed that the concentrated solar cell generated the power more approximately 7 times than without concentration in spite of non-heat sink. If CPV technology included heat sink combines already developed PV tracking system, it will have a merit economically.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.109-116
• /
• 2011

This study examined into property of flour dust explosion to get the basic data for safety of industry by protecting accident of dust explosion. The experiment was conducted to know the effect of distance between explodes in the experiment device, effect of flour dust concentration, effect of humidity, effect of explosion pressure to the dust concentration and effect of inactive substance additive. The study indicated that explosion was happened effectively at the optimum distance 100mm or less in inter-polar distance, and minimum ignition energy was measured at 6mm. The data of feed concentration to the probability of explosion showed that the smaller the particle diameter was, the larger probability of explosion was, and the higher the dust concentration was, the more increased the pressure of explosion was, but more than upper limit of dust concentration, then the explosion of pressure decreased. For the effect of humidity, the more it contained water, the more decreased the ignition energy of dust was, so increased minimum explosive concentration, and effective water content was minimum 10% or more. Inactive substance additive was effective in adding more than 15% CaCO3 and CaO as substance inhibiting dust explosion, in which CaCO3 was more effective than CaO. the analysis of the flame of dust explosion was performed by high-speed video camera, it showed the size of flame bacame smaller in order that sub feed, main feed, wheat powder. As a result, sub feed was expected to be less dangerous than others.

• Korean Journal of Poultry Science
• /
• v.12 no.2
• /
• pp.89-95
• /
• 1985

Two experiments were undertaken to study the growth promoting effect of Spiramycin and Virginiamycin at the level of 5ppm each. In the first experiment, 180 day - old male broiler chickens (Maniker parent stock) were divided into 18 groups of 10 birds each. Six groups were placed on one of the three experimental diets (Nonmedicated control, Spiramycin supplemented diet and Virginiamycin supplemented diet). Basal diet of Experiment 1 contained 21.9% crude protein and 3159kcal /kg diet. Second experiment employed same treatments as were used in the Experiment 1. Ninety male and 90 female day-old broiler chickens(Maniker commercial) were grouped by 10 birds of sane sex in each and assigned to 3${\times}$2 factorial design. Basal diet of Experiment 2 contained 19.95% crude protein and 2931kcal/kg diet. Chicks were fed for six weeks in battery with raised floor and kept further for metabolic trials. The results of feeding trials showed that there were no statistically significant differences between treatments in weight gain, feed intake, feed efficiency and mortality. However, birds fed Antibiotic B supplemented diet grew approximately 3% more than the control in Experiment 1 and than those fed Antibiotic A supplemented diet in Experiment 2. Feed efficiency was also improved by supplementing Antibiotic B in both experiments. There were significant(P〈0.01) differences between sexes in growth rate, feed intake and feed efficiency. Birds fed Antibiotic B supplemented diet of Experiment 1 showed significantly (P〈0.01) greater availability for crude fat than those fed other diets. Birds fed Antiobiotic A supplemented diet in Experiment 1 showed significantly (P〈0.05) lower availability of crude fiber than those of other treatments. Weight of small intestine of birds fed Antibiotic B tended to be heavier than those fed other diets.

• Korean Journal of Agricultural Science
• /
• v.46 no.4
• /
• pp.991-997
• /
• 2019

This study was conducted to investigate the laying period performance of two crossbred Korean native chicken (KNC) grand parent stock (GPS) layer during 20 to 40 weeks. A total of 351 20-week-old KNC GPS were allocated in a completely randomized design to give 4 birds per each cage. The chickens were fed commercial diets [i.e., week 20 - 32, crude protein (CP) 18.0% and metabolizable energy (ME) 2,850 kcal/kg; week 32 - 40, CP 17.0% and ME 2,800 kcal/kg)] and fresh water during the whole experiment period ad libitum basis. Body weight, age of sexual maturity, egg weight, hen-day egg production (HDP) and feed conversion ratio (FCR) were measured during the experiment period (week 20 - 40). The results show no significant difference in the Body weight, age of sexual maturity, egg weight, and hen-day egg production (HDP) except for egg weight. 1B had a higher egg weight on week 36 only. We expect that the reason why most factors showed no significant difference is the lack of nutrients caused by limited feeding which follows the standard feeding system for the grand-parent stock. These results provide basic information for laying data in 2-way crossbred Korean native chickens.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.462-467
• /
• 2007

From the research which it sees verification of the whole interpretation and local interpretation of the durability steel deck bridge a static test and it produces the test body which it sells with character and it executes smallness pul lek detailed interpretation it leads and the appropriate characteristic of smallness pul lek detailed interpretation and to sleep a nominal stress price and it compares it judges it does. The stress quality from each structure region which it follows in load stock location it analyzes and from the hazard which evaluates, the objective region the length rib and the bottom grater weld zone, the length rib and width rib connection department and the width rib with the father it divided. It investigated the stress distribution of the test body from these objective location, FEM interpretation it led and the conduct against each structure state tax it analyzed. General conduct the load stock location the floor plate is located in the center with interpretation price together symmetry characteristic to seem, it cannot be like that it cannot there is one actual test price. Like this reason the length rib and width rib connection actually production even production characteristic security it is a day when it is impossible with the curvature junction department which it blows, it follows in examination body deferment condition and form feed with the fact that it is visible a big difference even with error of some it becomes. Consequently for a data and the research which are more accurate it is judged with the fact that the effort which is prudent will be necessary.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.7
• /
• pp.1007-1016
• /
• 2018

USA beef production is characterized by a diversity of climates, environmental conditions, animal phenotypes, management systems, and a multiplicity of nutritional inputs. The USA beef herd consists of more than 80 breeds of cattle and crosses thereof, and the industry is divided into distinct, but ofttimes overlapping sectors, including seedstock production, cow-calf production, stocker/backgrounding, and feedlot. Exception for male dairy calves, production is predominantly pastoral-based, with young stock spending relatively brief portions of their life in feedlots. The beef industry is very technology driven, utilizing reproductive management strategies, genetic improvement technologies, exogenous growth promoting compounds, vaccines, antibiotics, and feed processing strategies, focusing on improvements in efficiency and cost of production. Young steers and heifers are grain-based diets fed for an average of 5 months, mostly in feedlots of 1,000 head capacity or more, and typically are slaughtered at 15 to 28 months of age to produce tender, well-marbled beef. Per capita beef consumption is nearly 26 kg annually, over half of which is consumed in the form of ground products. Beef exports, which are increasingly important, consist primarily of high value cuts and variety meats, depending on destination. In recent years, adverse climatic conditions (i.e., draught), a shrinking agricultural workforce, emergence of food-borne pathogens, concerns over development of antimicrobial resistance, animal welfare/well-being, environmental impact, consumer perceptions of healthfulness of beef, consumer perceptions of food animal production practices, and alternative uses of traditional feed grains have become increasingly important with respect to their impact on both beef production and demand for beef products. Similarly, changing consumer demographics and globalization of beef markets have dictated changes in the types of products demanded by consumers of USA beef, both domestically and abroad. The industry is highly adaptive, however, and responds quickly to evolving economic signals.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1998.10a
• /
• pp.249-265
• /
• 1998

The yearly consumption of soybean ranged from 1.5 to 1.7 million tons in Korea during 1995-1997 with an increasing trend of annual consumption by 60,000 tons. Gross consumption of soybean was 1.74 million tons in 1997: 1.292 million tons for feed, 0.433 million tons for food and its processing, and 15,000 tons for seed and other uses. Particularly, Korea totally depends upon imports of soybean for feed and oil. Only about $40{\%}$ of soybeans used for food and its processing are supplied through domestic production. Korean markets will be open to foreign agricultural products except for rice in 2004 when the Uruguay Round treaty is completed. According to the Korean Rural Economics Institutes reports, soybean consumption in 2004 is expected to be 1.87 million tons that is higher than that in 1997 by 0.13 million tons. In order to meet the need for soybean, Korean government planned to supply from 0.17 million tons of domestic production plus 1.7 million tons of imports, and also planned to raise the self-supply rate of $9.1{\%}$ in 2004 from $8.6{\%}$ in 1997. According to the USDA reports on international soybean production and consumption, its production is expected to be 150 million tons over the world and the international market prices for soybean will be unstable in 2004. Based on these reports, international soybean trade capacity will be 36 million tons in 2004 that is lower than 39 million tons (accounting for $25{\%}$ of gross production) in 1597. Also, a term-end stock in 2004 is estimated to be 9.6 million tons that is low as compared to 18.6 million tons In 1997, In coping with domestic and international soybean production, consumption and supply, and further possible food crisis, national policies and continuous efforts are necessarily required to promote domestic production and to reduce imports of soybean.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.2
• /
• pp.161-167
• /
• 1983

In this study the phenomenon of cutting stress which arises on cutting tools and work pieces in cutting process is investigated by rake angle of cutting tools and feed for this measurement, P$_{s}$-1 (high modulus, photolastic Inc.) was used as a cutting tool, P$_{s}$-3 (medium modulus, photolastic Inc.) was used as work piece and reduction apparatus was attached to the head stock, and orthogonal cutting was adapted as a cutting method and transparent glass was used to block the strain in the orientation of thickness. The followings are the results of this study. (1) Photoelastic experimental equipments have made it possible to make dynamic measurement and analyze stress distribution in cutting tool and work piece surface which has hitherto been conducted only in static measurement and analyzing method. (2) The maximum stress arising at tools and work pieces in cutting process is on the tool edge tip, and the maximum stress arising on the tip of cutting tools is equal to that on the contacting area of work pieces in values. (3) The distributions of maximum shear stress on certain parts of the cutting tools and work pieces are as follows; for cutting tools, .alpha.=12.deg., .alpha.=0.deg., .alpha.=-12.deg. in order, and for work pieces, .alpha.=-12.deg., .alpha.=0.deg., .alpha.=12.deg. in opposite order.der.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.742-745
• /
• 2001

Plastics are one of difficult materials for recycling due to their characteristics in use. Recycling ratio of waste plastics was around 40% in last year in Japan, which includes energy recovery. Feed stock recycling and mechanical recycling are not easy because of additives in commercial plastics. Then, pyrolysis treatments have been done to recovery energy. Although plastics are easy to fire, complete combustion of them is not easy if anti-firing agents are added especially. Therefore, researches on pyrolysis or combustion behaviors of plastics containing additives are important from a view point recycling of plastics. Direct observation of popular plastics like polystyrene (PS), polycarbonate (PC), polyphenyle ether (PPE) and polyvinyl chloride (PVC) to investigate their pyrolysis behaviors in the present study. In case of PS, melting and gas evolution started at 9$0^{\circ}C$ and 39$0^{\circ}C$ respectively. And combustion finished at 445$^{\circ}C$. On the other hand, more than $600^{\circ}C$ and sufficient oxygen are required for complete combustion of PC and PPE.