• Journal of Biosystems Engineering
• /
• v.34 no.2
• /
• pp.95-105
• /
• 2009

A method was proposed which employed control of the drop location of fertilizer particles on a spinner disc to optimize the spread pattern uniformity. The system contained an optical sensor as a feedback mechanism, which measured discharge velocity and location, as well as particle diameters to predict a spread pattern of a single disc. Simulations showed that the feed gate adaptation algorithm produced high quality patterns for any given application rate in the dual disc spreader. The performance of the feed gate control method was assessed using data collected from a Sulky spinner disc spreader. The results showed that it was always possible to find a spread pattern with an acceptable CV lower than 15%, even though the spread pattern was obtained from a rudimentary flat disc with straight radial vanes. A mathematical optimization method was used to find the initial parameter settings for a specially designed experimental spreading arrangement, which included the feed gate control system, for a given flow rate and swath width. Several experiments were carried out to investigate the relationship between the gate opening and flow rate, disc speed and particle velocity, as well as disc speed and predicted landing location of fertilizer particles. All relationships found were highly linear ($r^2$ > 0.96), which showed that the time-of-flight sensor was well suited as a feedback sensor in the rate and uniformity controlled spreading system.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.129-129
• /
• 2022

The production area of Italian ryegrass feed is gradually increasing and labor-saving technologies are being developed. If sowing and fertilization are carried out agricultural drones, working hours and labor are reduced. The purpose of this study is to suggest an appropriate seedling amount for feed production by drone spreading of Italian ryegrass in spring. In addition, we would like to review the productivity of the drone seeding machine that is being developed by Rural Development Administration(RDA) of Korea. Italian ryegrass was sown by a drone in February at the NICS located in Gyehwa-hwa, Jeollabuk-do, South Korea. In Experiment 1, 50kg/ha, 60, 70, and 80 seeding rates were sown with a horizontal spreader drone. In Experiment 2, uniform spreaders type drone and horizontal spreader type were sown with the same seeding amount and compared. The drone was sown using the AF-52 aircraft. The higher the seeding amount, the higher the emergence rate. As the seeding amount increased, the plant length increased, but the number of tillers per individual decreased. The dry matter weight of the feed was the highest at 1,326kg/10a at the seeding rate of 70kg/ha, and decreased by 20.5% at the seeding rate of 80kg/ha. The coverage ratio was the highest at 96 at the seeding rate of 70kg/ha, which was the most advantageous for spring sowing. In the comparative experiment according to the spreader type, the uniform spreader had a high emergence rate per unit area. When the uniform spreader was used, the dry matter weight of the feed was 17% higher than that of the horizontal one, and the coverage was about 5% higher.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.61-72
• /
• 2018

The aim of this present study was to investigate the impact of different seeding rate and nitrogen fertilizing levels on the seed yield and feed value of oats(Avena sativa L.) grown in Gyeongbuk area for two years. The experiment was arranged in split plot design with 3 main plots(100, 130 and 160 kg of seed/ha) and 4 subplots(0, 50, 70 and 90 kg N/ha), with 3 replicates. Heading, flowering, and maturing dates of oats sown in spring 2017, delayed by two days compared to that of spring 2016, and the plant height of spring 2017 were significantly shorter than that of spring 2016(18.1 ~ 23.4 cm). In addition, the highest number of stems and number of panicles according to different seeding rate and nitrogen fertilizing levels were achieved with the seeding rate of 160 kg/ha and 90 kg of N/ha in 2016 and 2017, respectively. In case of seed yield as affected by different seeding rate, the highest seed yield was achieved with a seeding rate of 130 kg/ha(p<0.05), and based on nitrogen fertilizing levels, the highest yield was obtained in 50 kg of N/ha compared to others. The crude fiber(CF), neutral detergent fiber(NDF) and total digestible nutrients(TDN) of oats cultivated and harvested in spring 2016 and 2017 according to different sowing rate were the highest in the seeding rate of 130 kg/ha. The crude protein(CP) content and total digestible nutrients(TDN) of 2016-2017 as influenced by nitrogen fertilizer levels were the highest in the nitrogen fertilizer level of 90 and 50 kg N/ha, respectively. In conclusion, the proper seeding rate and the optimal nitrogen fertilizing level in Gyeongju, Gyeongbuk province were considered to be the most appropriate in 130 kg/ha and 50 kg of N/ha, respectively.

• Korean Journal of Ecology and Environment
• /
• v.53 no.3
• /
• pp.221-228
• /
• 2020

We studied the development of the endangered gold-spotted pond frog, Pelophylax chosenicus eggs and analyzed growth and survival rate of the tadpoles while feeding different feed to obtain the basic data on the its biological traits and reproduction. We observed the fertilized eggs of gold-spotted pond frog that naturally spawned in a breeding tank using a microscope. Fertilized eggs were sphere shape surrounded by colloid layers, clearly distinct with animal and plant poles. The fertilized eggs hatched 31 hours after fertilization and operculum complete at 175 hours after fertilization at water temperature of 27.0±1.0℃. As a result of growth and survival rate by different feed from 35 days after mouth open stage, vegetable feed (VF) group and tetra-min (T) group were significantly higher average weight gain rate (WG)(5843.9% and 5736.3%, respectively) and average specific growth rate (SGR) (11.67% and 11.62, respectively) compared with other groups (WG: 641.8~4625.2%, SGR: 5.72~11.01%). The vegetable (V) group showed the lowest growth rate (P<0.05). The average feed efficiency was 177.83% in the VF group, about 17 times higher than the V group. In addition, the average survival rate of the VF and T groups were the high at 97.5% and 100%, respectively, and the V group was the lowest at 32.5%. Therefore, the more efficient feeds for successful breeding is singly with VF or T.

• Membrane Journal
• /
• v.6 no.1
• /
• pp.44-52
• /
• 1996

For the purpose of the optimal design of a frame and plate type of pervaporation module, model equations which can predict the effects of feed flow condition on the temperature distribution of the feed developed in the module were established and the temperature distribution with feed flow condition was investigated through the model si$$\mu$ation. With increasing the Reynolds number of feed flow in the module, the flow velocity gradient in the channel height-direction as well as the volume rate of feed which acts as energy source for the evaporation of perrneants on the permeate-side surface of a membrane increased to such an extent that both mass and heat flux in the channel height direction could increase and the temperature drop of feed due to the evaporation of the permeant could be reduced correspondingly. A decrease in channel height caused the temperature drop of feed because of decreasing feed flow in the module. It was observed that the si$$\mu$ation result on the effect of Re on the temperature distribution of feed in the module has an agreement with experiment.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2008

In the Web 2.0, besides more gaining information on the web, the number of web sites that take advantage of RSS increases explosively. Commonly each users search RSS channels through the web search engine before registering RSS channel's url to the RSS reader. Users judge whether the site is RSS channel or not and register an RSS channel's url through theirs interests. Because accomplished by users themselves, those processes conflict to user's convenience and quick consumption of information. Techniques of current search engines can't provide users with reliable RSS feed information as search results. In this paper, we analysis appropriateness of current search engines' techniques that offer users RSS feed search service and discuss their limitations. Also, we make up RSS feed database through classification of RSS tag being possible to search RSS feed information effectively and apply update rate of each RSS channel's feed to ranking algorithm providing more reliable search results.

• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.250-261
• /
• 1995

This study has been performed to develop an agricultural waste incinerator to combust the rice hull originated from RPC with the typical disposal treatment capacity of 30kg/h and to test performance of the developed incinerator. Experimental results are summarized as following. 1. The optimum feed rate of rice hull of the incinerator is 30kg/h with air ratio of 1.5. 2. The contents of $SO_2$ in flue gas is maximum 18ppm(when rice hull feed rate was 20kg/h and air ratio of 1.5), minimum 7ppm(when rice hull feed rate was 30kg/h and air ratio of 1.5) and average 11ppm. So there is no environmental pollution problem for the incinerating treatment of rice hull of the RPC. 3. The temperature of water of heat exchanger are $53^{circ} C$ and $62^{circ} C$ with water flow rate $3{ell}/min$ and $1.5{ell}/min$ at the optimum combustion condition, respectively. 4. According to theoretical energy calculation, the energy from rice hull combustion may be amounted as much as 80%~190% of energy supplied by kerosene required by RPC.

• Journal of Welding and Joining
• /
• v.13 no.4
• /
• pp.85-102
• /
• 1995

Weld quality of GMA welding processes is closely related to arc stability. Although many researches on arc stability have been performed, real-time estimation of arc stability has not been attempted. For instance, Mita proposed a off-line statistical method in which short circuiting and arcing time, and voltage and current wave forms were sampled to assess arc stability. But this method is not suitable to assess arc stability for GMA welder which employ inverter power source due to its controlled current and voltage wave forms. In this paper, the relationship between are stability and wire feed rate fluctuation is analyzed to propose new criterion for inverter power source. When arc voltage and arc current and arcing time are analyzed, we can assess arc stability only for short circuit transfer mode. When wire feed rate is analyzed, we can estimate arc stability udner the condition of spray transfer mode as well. Hence, the wire feed rate is chosen for monitoring process variable to cover possible metal transfer modes in GMAW. Through this research, it has been identified that arc stability in GMA welding processes is closely related to wire fed rate. When inverter power source is used, conventional statistical method of estimating arc stability, such as Mita index, is no longer valid due to its controlled voltage and current wave forms. Arc stability has been also examined in phase plane diagram.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.2
• /
• pp.184-190
• /
• 2010

Recently, the polishing process using magnetorheological fluids(MR fluids) has been focused as a new ultra-precision polishing technology for micro and optical parts such as aspheric lenses, etc. This method uses MR fluid as a polishing media which contains required micro abrasives. In the MR polishing process, the surface roughness and material removal rate of a workpiece are affected by the process parameters, such as the properties of used nonmagnetic abrasives(particle material, size, aspect ratio and density, etc.), rotating wheel speed, imposed magnetic flux density and feed rate, etc. The objective of this research is to predict MRR according to the polishing conditions based on the multiple regression analysis. Three polishing parameters such as wheel speed, feed rates and current value were optimized. For experimental works, an orthogonal array L27(313) was used based on DOE(Design of Experiments), and ANOVA(Analysis of Variance) was carried out. Finally, it was possible to recognize that the sequence of the factors affecting MRR correspond to feed rate, current and wheel speed, and to determine a combination of optimal polishing conditions.

• Advances in materials Research
• /
• v.5 no.2
• /
• pp.67-80
• /
• 2016

The objective of the present work is to optimize process parameters namely, cutting speed, feed rate, and depth of cut in milling of AISI 304 stainless steel. In this work, experiments were carried out as per the Taguchi experimental design and an $L_{27}$ orthogonal array was used to study the influence of various combinations of process parameters on surface roughness (Ra) and material removal rate (MRR). As a dynamic approach, the multiple response optimization was carried out using grey relational analysis (GRA) and desirability function analysis (DFA) for simultaneous evaluation. These two methods are considered in optimization, as both are multiple criteria evaluation and not much complicated. The optimum process parameters found to be cutting speed at 63 m/min, feed rate at 600 mm/min, and depth of cut at 0.8 mm. Analysis of variance (ANOVA) was employed to classify the significant parameters affecting the responses. The results indicate that depth of cut is the most significant parameter affecting multiple response characteristics of GFRP composites followed by feed rate and cutting speed. The experimental results for the optimal setting show that there is considerable improvement in the process.