• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.59-64
• /
• 2006

Knifing parameters specially related to lint generation in the knitting zone such as knitting needles, yarn feed angle and yarn feed speed were investigated with a developed test rig, which simulated the hutting area on the knitting machine. Three different types of needle counts and feeding angles affected tension and the amount of lint that was caused by frictional forces between the yarn and the morphological structure of the needle. However, the yarn feed speed did not affect the lint generation. The results implied that a more advanced test rig was necessary for further study. Also, chemical and mechanical modifications of the kilting elements may be necessary to improve the lint problem.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.6
• /
• pp.700-708
• /
• 2019

To verify the possibility of using resistograph to estimate the age of big old living trees, we selected three Zelkova serrata and seven Pinus densiflora in Goesan. The mean diameters at breast height of Z. serrata and P. densiflora were 102 (92-116) cm and 80 (65-110) cm, respectively. The heights measured from the ground using a resistograph ranged at 1.2-4.3 m and 0.6-1.1 m for Z. serrata and P. Densiflora, respectively. The most appropriate needle speed to determine tree-ring boundaries for measuring ring width was 1500 r/min for both tree species. Alternatively, the suitable feed speeds for Z. serrata and P. densiflora were 50 cm/min and 150 cm/min, respectively. From the measured data, the mean numbers of tree rings of Z. serrata and P. densiflora were 57 (43-68) and 104 (93-124), respectively, and the mean tree-ring widths were 4.27 mm (3.18-5.09 mm) and 2.93 mm (2.32-3.34 mm), respectively. A comparison between the time series of tree-ring widths by resistograph and that from the local master chronologies tallied for the heartwood part. Finally, this study showed that resistograph can be used to estimate tree ages when a local master chronology is available.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.1
• /
• pp.90-100
• /
• 2019

This study aims to determine the ideal feed speed of a resistograph to evaluate the number of tree rings in several tree species. The needle speed was fixed at 1,500 r/min. Herein, various tree species, such as Pseudotsuga menziesii, Pinus koraiensis, Abies holophylla, and Zelkova serrata, were considered for experiments. Results showed that the most proper feed speed for Zelkova serrata, Larix kaempferi, Pseudotsuga menziesii, Abies holophylla, and Pinus koraiensis was 75, 100, 100, 150, and 175 cm/min, respectively. However, in all the cases, the electric resistance values of tree ring narrower than 1 mm were not suitable for determining tree-ring boundaries. Upon comparing the inter-annual time series of ring widths and electric resistance values of resistograph, a meaningful synchronization was verified. If resistograph would be improved to the extent that it can measure tree rings narrower than 1 mm, it can replace the conventional method used for counting the number of tree rings in the increment cores. Additionally, it can also be used to investigate the tree growth.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.24-29
• /
• 2000

This paper is experimental study of machining characteristics about martensitic heat resisting steel STR11. Machining characteristics are different according to internal quality(chemical compositions, microscopic structure and nonmetallic inclusion) mechanical properties(tensile strength value impact value and hardness) and dynamic cutting force. Following are the results : 1. In analyzing internal quality test materials have typical martensite structure and a minute needle-shaped structure. 2. Tensile strength and reduction of area and hardness are larger. But values of elongation and impact values are smaller. Fracture surface of tensile specimen is ductile. 3, Cutting force is decreasing with cutting speed increasing 4. Cutting force is increasing with feed speed increasing.

• Journal of Fashion Business
• /
• v.2 no.2
• /
• pp.77-84
• /
• 1998

As a result of surveying the process for sewing, the problems involving the outlook of sewn apparels were error off the standard dimensions and uneven sizes, which verifies the need for urgent technological guidance and development. On the other hand, the majority of the businesses were operating their sewing machines at the speed of 2,000 rpm or higher. Such a conventional working method may not well reflect the properties of the stretch fabrics, causing poorer quality products. Moreover, most of the businesses were using the ball-point needles which should be replaced with appropriate ones for stretch fabric. The types of feed dog which were used most were Drop feed, Union feed, Confound feed, Differential feed in their oder. Anyway, the automatized dog should urgently replace these inefficient ones for stretch fabric. Meanwhile, the types of presser foot which were used most were Plain foot, Teflon foot, Roller foot, Ring foot in their order, which also necessitates their replacement which Teflon foot. 2. As a result of surveying the process for finishing and inspection, while the causes scores less than 3 points, those due to pressers scored more than 3 points. This results suggests that a technological guidance is needed for the pressing work. Lastly, the causes of defect due to poor outlook attributable to such notions as button or zipper and those due to the uneven sizes scored more than 3 points, which suggests that the entire of needle works should be reformed through scientific research and technological guidance.