• Journal of Korean Society of Water and Wastewater
• /
• v.17 no.4
• /
• pp.510-518
• /
• 2003

The fluoride work management of water supply conveyance has been recommending by the WHO to prevent of tooth decay. Fluoridation of public water supplies has been practiced since 1945. The present approximately 67 countries reported community water fluoridation benefiting many cities. At our country, Fluoridation began in 1981 in Chongiu and Jinhea. In 2002, approximately 40 cities have large populations consuming fluoridated water. But Chongiu stopped fluoridation water works. Few public health measures have been accorded greater clinical and laboratory research, epidemiological study, clinical trials, and public attention than has water fluoridation. In this study, chemical analysis of Sodium Silicofluoride and Fluoride Feed Equipment analyzed. And this study proposed to Fluoride concentration experimental (lab. and field exp.), economics analysis, prevention effect. This study can be decided on the concentration of fluoride injection in Water Fluoridation. Hereafter, this study will be useful in safety and economics of Water Fluoridation in the future.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.10
• /
• pp.1580-1586
• /
• 2007

The objective of this study was to compare the bioefficacy of L-lysine sulfate relative to L-lysine${\cdot}$HCl for 10 to 20 kg pigs. Two experiments were conducted to determine the bioefficacy of the two sources of lysine using daily gain, feed conversion, plasma urea nitrogen and nitrogen retention as the response criteria. In experiment 1, 168 crossbred barrows ($Landrace{\times}Large$ White), weaned at $28{\pm}3$ d ($9.07{\pm}0.78$kg body weight), were allotted to one of seven dietary treatments in a $2{\times}3$ (two lysine $sources{\times}three $ lysine levels) factorial arrangement of treatments with an added negative control treatment group. The basal diet was based on corn, peanut meal and soybean meal and provided 0.67% lysine. The basal diet was supplemented with 0.1, 0.2 or 0.3% lysine equivalents supplied from either L-lysine sulfate or L-lysine${\cdot}$HCl. Each treatment was fed to six pens of pigs with four pigs per pen. The trial lasted 21 days. The relative bioefficacy value of lysine in L-lysine sulfate using daily gain, feed conversion and plasma urea nitrogen as response criteria was 1.01, 1.05 and 1.04 of the lysine in L-lysine${\cdot}$HCl, respectively. In experiment 2, 42 crossbred ($Landrace{\times}Large$ White) pigs ($16.03{\pm}1.58$ kg body weight) were housed in stainless steel metabolism cages for 10 d and fed the seven diets used in the nitrogen-balance trial. The relative bioefficacy value of L-lysine sulfate was estimated to be 0.95 as effective as L-lysine${\cdot}$HCl for nitrogen retention on an equimolar basis. The t-test analysis revealed that bioefficacy of lysine in L-lysine sulfate was not significantly different from lysine in L-lysine${\cdot}$HCl, which was set at 1.00. In conclusion, L-lysine sulfate can be used instead of L-lysine${\cdot}$HCl to fortify lysine-deficient diets fed to 10 to 20 kg pigs.

• Animal Bioscience
• /
• v.35 no.11
• /
• pp.1711-1724
• /
• 2022

Objective: The present study was to evaluate the effects of different rapeseed meal substitution (RSM) and glutamine (Gln) supplementation on growth performance, intestine morphology, and intestinal mucosa barrier of broilers. Methods: Four hundred and twenty Qiandongnan Xiaoxiang Chicken at 1 day of age with similar weight were chosen and were randomly assigned into 7 groups, consisting of 10 replicates per group and 6 broilers per replicate. Three groups were provided with diets separately containing 0%, 10%, and 20% RSM, and the other four groups were fed with diets separately supplemented with 0.5% and 1% Gln based on the inclusion of 10% and 20% RSM. At 21 and 42 days of age, 10 broilers per group were chosen to collect plasma and intestinal samples for further analysis. Results: The results showed that 10% RSM decreased average daily feed intake (ADFI) and average daily weight gain (ADG) of broilers at 21 days of age (p<0.05). Furthermore, both ADFI and ADG of broilers at 21 and 42 days of age were decreased by 20% RSM, while feed conversion ratio (FCR) was increased (p<0.05). Besides, 10% RSM resulted in lower intestinal villus height and the ratio of villus height to crypt depth, deeper crypt depth (p<0.05), combined with the lower mRNA expressions of occludin, claudin-1, and zonula occludens-1 (ZO-1) in broilers at 21 days of age (p<0.05). Similar results were also observed in broilers at 21 and 42 days of age fed with 20% RSM. However, 1% Gln improved the growth performance of broilers fed with 10% and 20% RSM (p<0.05), ameliorated intestine morphology and elevated mRNA expressions of occludin, claudin-1 and ZO-1 (p<0.05). Conclusion: In conclusion, the increasing inclusion of RSM resulted in more serious effects on broilers, however, 1.0% Gln could reverse the negative effects induced by the inclusion of RSM.

• The Journal of Fisheries Business Administration
• /
• v.29 no.1
• /
• pp.121-137
• /
• 1998

This study was conducted to examine the economic evaluation of the newly developed fish meal analog (BAIFA-M) in Korean rockfish feed. A raw fish feed (MP) and two commercially formulated diets (EP) were employed to compare weight gain (WG), feed conversion ratio (FCR) and survival rate (SR) from the sea cage culture system. By using the economic model in the practical sea cage culture system, feed cost, production cost and gross profit per kg production, rate of profit to gross revenue (RPGR), and internal rate of return (IRR) were calculated based upon the results of the experiment and the information of the private aquaculture farm (Young Chang) in Tong young, Korean. IRR criteria is one of the popular economic feasibility analysis methods applicable far aquaculture industry. This is an economic evaluation method to compare the given interest rate or the discount rate with IRR which can be calculated by the difference between the present value of the benefit stream and of the cost stream. The benefits of using EP on WG, FCR, SR, and production cost will be emphasized in this study. Fish averaging 20$\pm$3.6g (Mean$\pm$SD) were randomly distributed in each small cage (6m$\times$6m) as groups of 2,000 fish. By using 3 large size cages (12m$\times$12m), 12 small cages were constructed, and only 9 small cages were employed for three replicates of each diet treatment. To compare with MP diet, two sinking EP diets were designed by our laboratory and produced by the local feed company who wanted to promote these EP diets for the mass cage culture of Korean rockfish in the future. Two EP diets contain white fish meal and/or BAIFA-M as the main animal protein sources : WFM diet, maximum 43% of white fish meal : BAIEA- M diet, 30% of white fish meal nab replaced by BAIFA- M from WFM diet. Results are summarized in Table 1. Fish fed MP diet showed significantly lower SR than does fish fed two EP diets(P<0.05). However, there Were no significant difference on FCR among fish fed three practical diets. Table 1. Average feed conversion ratio (FCR), accumulative average survival rate (SR) and economic evaluation data far three practical diets. As we expected, BAIFA-M diet is more economical than WFM diet as well as MP diet. Feed cost and production cost per kg production from BAIEA - M diet were lower than those from WFM and MP diets. Moreover, gross profit per Kg production, RPGR and IRR from BAIFA- M diet were higher than those from WFM and MP diets. This economic evaluation study clearly indicated that MP diet should be replaced by the commerical formulated EP diets as soon as possible in the near future because MP diet is not economical in the practical sea cage culture system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.12
• /
• pp.1708-1716
• /
• 2013

The objective of the trial was to study the relationship between the methane ($CH_4$) production and the Cornell Net Carbohydrate and Protein System (CNCPS) carbohydrate fractions of feeds for cattle and the suitability of CNCPS carbohydrate fractions as the dietary variables in modeling the $CH_4$ production in rumen fermentation. Forty-five rations for cattle with the concentrate/roughage ratios of 10:90, 20:80, 30:70, 40:60, and 50:50 were formulated as feed samples. The Menke and Steingass's gas test was used for the measurement of $CH_4$ production. The feed samples were incubated for 48 h and the $CH_4$ production was analyzed using gas chromatography. Statistical analysis indicated that the $CH_4$ production (mL) was closely correlated with the CNCPS carbohydrate fractions (g), i.e. CA (sugars); $CB_1$ (starch and pectin); $CB_2$ (available cell wall) in a multiple linear pattern: $CH_4=(89.16{\pm}14.93)$ $CA+(124.10{\pm}13.90)$ $CB_1+(30.58{\pm}11.72)$ $CB_2+(3.28{\pm}7.19)$, $R^2=0.81$, p<0.0001, n = 45. Validation of the model using 10 rations indicated that the $CH_4$ production of the rations for cattle could accurately be predicted based on the CNCPS carbohydrate fractions. The trial indicated that the CNCPS carbohydrate fractions CA, $CB_1$ and $CB_2$ were suitable dietary variables for predicting the $CH_4$ production in rumen fermentation in vitro.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.36-48
• /
• 2022

As a valid numerical method to obtain a high-resolution result of a flow field, computational fluid dynamics (CFD) have been widely used to study coolant flow and heat transfer characteristics in fuel rod bundles. However, the time-consuming, iterative calculation of Navier-Stokes equations makes CFD unsuitable for the scenarios that require efficient simulation such as sensitivity analysis and uncertainty quantification. To solve this problem, a reduced-order model (ROM) based on proper orthogonal decomposition (POD) and machine learning (ML) is proposed to simulate the flow field efficiently. Firstly, a validated CFD model to output the flow field data set of the rod bundle is established. Secondly, based on the POD method, the modes and corresponding coefficients of the flow field were extracted. Then, an deep feed-forward neural network, due to its efficiency in approximating arbitrary functions and its ability to handle high-dimensional and strong nonlinear problems, is selected to build a model that maps the non-linear relationship between the mode coefficients and the boundary conditions. A trained surrogate model for modes coefficients prediction is obtained after a certain number of training iterations. Finally, the flow field is reconstructed by combining the product of the POD basis and coefficients. Based on the test dataset, an evaluation of the ROM is carried out. The evaluation results show that the proposed POD-ROM accurately describe the flow status of the fluid field in rod bundles with high resolution in only a few milliseconds.

• Structural Engineering and Mechanics
• /
• v.86 no.1
• /
• pp.119-137
• /
• 2023

The purpose of this research is to assess the performance of CBN and ceramic tools during the dry turning of gray cast iron EN GJL-350. During the turning operation, the variable machining parameters are cutting speed, feed rate, depth of cut and type of the cutting material. This contribution consists of two sections, the first one deals with the performance evaluation of four materials in terms of evolution of flank wear, surface roughness (2D and 3D) and cutting forces. The focus of the second section is on statistical analysis, followed by modeling and optimization. The experiments are conducted according to the Taguchi design L₃₂ and based on ANOVA approach to quantify the impact of input factors on the output parameters, namely, the surface roughness (Ra), the cutting force (Fz), the cutting power (Pc), specific cutting energy (Ecs). The RSM method was used to create prediction models of several technical factors (Ra, Fz, Pc, Ecs and MRR). Subsequently, the desirability function approach was used to achieve a multi-objective optimization that encompasses the output parameters simultaneously. The aim is to obtain optimal cutting regimes, following several cases of optimization often encountered in industry. The results found show that the CBN tool is the most efficient cutting material compared to the three ceramics. The optimal combination for the first case where the importance is the same for the different outputs is Vc=660 m/min, f=0.116 mm/rev, ap=0.232 mm and the material CBN. The optimization results have been verified by carrying out confirmation tests.

• Food Science of Animal Resources
• /
• v.35 no.1
• /
• pp.121-129
• /
• 2015

${\beta}$-agonists are anabolic compounds that promote fat loss and muscle gain, and their administration to livestock may provide economic benefits by increasing growth rate and feed efficiency. For these reasons, ${\beta}$-agonists are also commonly added to livestock feed as growth promoters. This can introduce a significant risk of secondary human poisoning through intake of contaminated meat. A new method for the simultaneous determination of three ${\beta}$-agonists (clenbuterol, ractopamine, and zilpaterol) was developed in this study and applied to various meat samples. The limits of quantification, derived through a validation test following Codex guidelines, were $0.2{\mu}g/kg$ for clenbuterol and zilpaterol, and $0.4{\mu}g/kg$ for ractopamine. The average recoveries for clenbuterol, ractopamine, and zilpaterol ranged from 109.1% to 118.3%, 95.3% to 109.0%, and 94.1% to 120.0%, respectively. The recovery and coefficient of variation (CV) values fell within the acceptable range according to the Codex guidelines. This method reduced the analysis time without decreasing detection efficiency by modifying the pretreatment steps. This method could be utilized to manage the safety of imported meat products from countries where zilpaterol use is still permitted, thereby improving public health and preventing ${\beta}$-agonist poisoning due to secondary contamination.

• Animal Bioscience
• /
• v.34 no.9
• /
• pp.1466-1478
• /
• 2021

Objective: Ruminants are completely dependent on their microbiota for rumen fermentation, feed digestion, and consequently, their metabolism for productivity. This study aimed to evaluate the rumen bacteria of lactating yaks with different milk protein yields, using high-throughput sequencing technology, in order to understand the influence of these bacteria on milk production. Methods: Yaks with similar high milk protein yield (high milk yield and high milk protein content, HH; n = 12) and low milk protein yield (low milk yield and low milk protein content, LL; n = 12) were randomly selected from 57 mid-lactation yaks. Ruminal contents were collected using an oral stomach tube from the 24 yaks selected. High-throughput sequencing of bacterial 16S rRNA gene was used. Results: Ruminal ammonia N, total volatile fatty acids, acetate, propionate, and isobutyrate concentrations were found to be higher in HH than LL yaks. Community richness (Chao 1 index) and diversity indices (Shannon index) of rumen microbiota were higher in LL than HH yaks. Relative abundances of the Bacteroidetes and Tenericutes phyla in the rumen fluid were significantly increased in HH than LL yaks, but significantly decreased for Firmicutes. Relative abundances of the Succiniclasticum, Butyrivibrio 2, Prevotella 1, and Prevotellaceae UCG-001 genera in the rumen fluid of HH yaks was significantly increased, but significantly decreased for Christensenellaceae R-7 group and Coprococcus 1. Principal coordinates analysis on unweighted UniFrac distances revealed that the bacterial community structure of rumen differed between yaks with high and low milk protein yields. Furthermore, rumen microbiota were functionally enriched in relation to transporters, ABC transporters, ribosome, and urine metabolism, and also significantly altered in HH and LL yaks. Conclusion: We observed significant differences in the composition, diversity, fermentation product concentrations, and function of ruminal microorganisms between yaks with high and low milk protein yields, suggesting the potential influence of rumen microbiota on milk protein yield in yaks. A deeper understanding of this process may allow future modulation of the rumen microbiome for improved agricultural yield through bacterial community design.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.7
• /
• pp.1001-1006
• /
• 2011

To determine the efficiency of copper (Cu) supplementation, a feeding experiment was carried out with 240 day old broiler chicks (vencobb-100). Birds were divided into four dietary treatments: i) C - no additives, ii) $T_1$-75 mg inclusion of Cu/kg diet, iii) $T_2$-150 mg inclusion of Cu/kg diet, iv) $T_3$-250 mg inclusion of Cu/kg diet. The present study was carried out in the Department of Animal Physiology, West Bengal University of Animal and Fishery Sciences, Kolkata, India for a period of 42 days (6 weeks). Growth performance was measured in terms of live weight gain, cumulative feed intake and feed conversion ratio at the end of $21^{st}$ and $42^{nd}$ day of the experiment and the result was found to be encouraging for commercial enterprises when the chickens were fed at 150 mg Cu/kg ($T_2$) of their diet. Excess dietary copper more than 150 mg/kg reduced the haemoglobin (Hb) concentration in blood and resulted in the accumulation of copper in the liver with decreased blood Hb concentration and packed cell volumes (PCV). Copper supplementation increased the total erythrocyte count (TEC) as copper is involved in erythropoiesis. But, from the result it is indicated that the dietary copper concentration could not alter the total leukocyte count (TLC). In case of different leucocytes count (DLC), there were no significant differences observed among the different treated groups. Statistical analysis showed significant (p<0.01) difference in plasma concentration of copper, zinc, ferrous and cholesterol among the different copper treated groups. The result indicates that supplementation of copper is an effective way of improving the production performance and haematological parameters in broiler chicken.