• 한국측량학회지
• /
• 제36권6호
• /
• pp.483-497
• /
• 2018

여러 장의 영상을 조합하여 한 장의 영상으로 제작하는 영상 모자이크는 넓은 지역의 영상을 판독하고 분석하는데 효과적이며, 연속 영상지도 등 다양한 공간정보 분야의 활용에 중요하다. 영상 모자이크의 중요한 과정은 인접 영상의 중복지역에서 최적의 접합선 추출과 모자이크된 영상의 색조보정이다. 이를 위해 본 연구에서는 SURF(Speeded Up Robust Features)에 의한 영상정합을 수행하여 중복지역을 결정하였다. Canny 필터로 추출한 윤곽선의 특성에 따라 등급을 정하여 접합선이 될 가능성이 높은 윤곽선을 선별하고, Dijkstra 알고리즘을 사용하여 윤곽선들을 연결하여 접합선을 결정하였다. 특히 비등방성 필터와 영상 피라미드를 적용하여 신뢰성 있는 접합선을 추출할 수 있었다. 또한 수치지도의 건물과 도로 레이어를 이용하여 효과적이고 효율적인 접합선을 결정할 수 있었다. 최종적으로 인접 영상들의 색조를 조절하여 품질을 향상시키기 위하여 히스토그램 정합과 접합선 feathering을 수행하였다.

• 한국가금학회지
• /
• 제51권2호
• /
• pp.65-71
• /
• 2024

병아리의 성 감별 방법으로 깃털 감별법이 상업적으로 가장 널리 이용되고 있다. 그러나 깃털 감별법이 산업적으로 실용화되기 위해서는 종계의 기초 계군 내 조우성과 만우성 유전자가 존재하고, 깃털 감별이 될 수 있는 종계 계통을 조성하여야 하고, 깃털 감별로서 병아리의 성 판별율이 정확하여야 한다. 따라서 본 연구에서는 상업용 토종닭의 깃털 감별을 위한 자가 성감별 종계 계통 조성 방법과 조성된 종계로써 생산한 상업용 병아리들의 깃털 성 판별의 유효성을 소개하고자 하였다. 깃털 감별용 종계 조성을 위한 기초 계군은 조우성 개체와 만우성 개체가 혼재되어 있었으며, 만우성유전자의 빈도가 0~0.205 정도로 추정되었다. 병아리의 깃털 자가 성감별을 위한 계통 조성으로 원종계의 부 계통은 암수 공히 조우성(kk)으로 고정하고, 모 계통의 부는 만우성 동형접합체(Z^KZ^K)를 가진 계군으로, 모는 조우성(Z^kW)을 가진 계군으로 조성하였다. 따라서 부계 종계는 조우성(Z^kZ^k), 모계 종계는 만우성(Z^KW)으로 되어 이들 간 교잡으로 생산된 병아리들은 수컷은 만우성(Z^KZ^k), 암컷은 조우성(Z^kW)을 가지므로 병아리의 깃털 형태로써 암수를 감별할 수 있었다. 또한 생산된 실용 병아리에 대한 깃털 감별의 유효성을 살펴보고자 생산 병아리 중 1,000수를 표본으로 항문 감별과 깃털 감별 간의 감별 일치도를 조사한 결과 일치율은 93.1%로 나타났다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권6호
• /
• pp.881-887
• /
• 2011

Feathers are one of the integument appendages that form the outer covering, or plumage, on birds. The goslings hatch with a downy coat of feathers formed in embryonic development. They moult the natal plumage into juvenile feathers between 3-5 weeks of age and than moult that juvenile plumage into adult plumage between 8-11 weeks of age. Feather weight of an adult goose makes up about 6.2% of its total body weight. Heritability of the feather production ability is relatively low ($h^2$ = 0.35). Within species or genotype, the quantity and composition of the plumage are affected by genetics (age, body weight or body surface area, feathering rate, sex) and environmental factors (nutrition and production system, weather, microclimate). After slaughter some 90-220 g marketable feathers can be obtained per goose. The yield of feathers and down from each hand-harvesting amounts to between 80 to 120 g per goose, depending upon the frequency and degree of completeness of the harvesting.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.108-111
• /
• 2004

Structural dynamic characteristics and aeroelastic stability of a small-scale bearingless rotor system have been investigated. A flexbeam is one of the most important component of bearingless hub system. It must have sufficient torsional flexibility as well as baseline stiffness in order to produce feathering motion. In the present paper, a cross-shaped composite flexbeam has been proposed for a guarantee of torsional flexibility and flapwise and lagwise bending stiffness. One dimensional elastic beam model was used for the construction of a structural model. Equivalent isotropic sectional stiffness was used in the blade model, and the flexbeam was regarded as anisotropic; which has ten independent stiffness quantities. CAMRAD II has been used for the analysis of structural dynamic characteristics of the bearingless rotor system. Rotational natural frequencies and aeroelastic stability at hovering have been investigated. Analysis result shows that the cross-shaped flexbeam has the rotational natural frequency tuning capacity.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.22-31
• /
• 2002

In this paper, PVA(polyvinylalcohol), oxidized starch and SBR latex were used as binders for ink-jet printing papers, and their effects of the type and blending ratio of binders on ink-jet printing properties were compared. In case of coating color using PVA mainly used for a binder in ink-jet printing, spreading of printed letters decreased and excellent images were manifested resulting from strong hydrophilic of PVA. However, increasing solids content of coating color was somewhat limited because of the interaction of PVA and functional groups in silica as well as high molecular weight of PVA. When oxidized starch and SBR latex were mixed with PVA at desirable ratio to solve these problems, runnability in coating process was improved and good printing properties were shown. Gloss was improved when latex was used along with PVA as a binder because of the thermoplastic property of the latex. From this result, possibilities of high solids content and high gloss ink-jet printing papers were investigated.

• 펄프종이기술
• /
• 제32권4호
• /
• pp.81-86
• /
• 2000

Hanji is a traditional handmade paper, which has been famous for its excellent qualities in strength, whiteness, gloss, and smooth feel in painting and writing in ancient Far East for many years. Nowadays, however, its old fame has declined and it has been used only in limited extent such as in traditional Korean brush painting and writing. In this study, 9 kinds of commercial handmade papers made in Korea, China, and Japan were collected and their printing and writing properties were evaluated by image analysis. Chinese handmade paper showed the best result in absorption area of China ink, the roundness and feathering of China ink blots, followed by Hanji. Abrasion coefficient of the Chineses papers was higher than that of the others, which was regarded to contribute to the difference in touch feeling of the writing brush on the papers. It was shown that absorption rate and blot area of China ink were increased by Dochim. Hanji which has recently been made by so called \"traditional method\" showed no quality difference from the modified Hanji.ied Hanji.

• 한국염색가공학회지
• /
• 제19권2호
• /
• pp.24-31
• /
• 2007

This paper addresses factors of line image quality on grain leather printed via inkjet printer. Lines were printed onto coated leather media, and line width, edge blurriness, and edge raggedness were evaluated for line image quality. Various factors influenced to wetting and capillary wicking were studied and found out that wicking through capillary between fibers causes significant feathering on leather surface similar with pulp capillary in copy Paper. Polyurethane and acrylic resin coating resulted good image qualify by reducing capillary wicking. The mixture of polyurethane and acrylic resin applied on grain leather satisfied with both image quality and surface hand. $AllWrite^{TM}$ ink brought best results of image quality, comparing with $VeraPrint^{TM}$ ink and $JetWrite^{TM}$ ink.

• Plant Resources
• /
• 제7권3호
• /
• pp.200-205
• /
• 2004

Sweet potato infected with a viral disease (SPFMV) showed irregular chlorotic patterns, so called feathering associated with faint or distinct ring spots that have purple-pigmented borders. SPFMV was eliminated from sweet potato plants using meristem tip culture. MS medium supplemented with BAP (2mg/L) and NAA (0.05 mg/L) was used for shoot proliferation and 1/2 MS medium for rooting of the plants. Highest percentage of regenerated plants (60%) was obtained from the optimum size (0.3-0.5mm) meristem tips. Of these, 60% plants were found negative for SPFMV by RT-PCR. Virus detection by RT-PCR was found to be a reliable method. Meristem-tip culture to produce SPFMV-free quality sweet potato and virus detection by RT-PCR is an efficient, time saving and reliable method for production of SPFMV-free tissue culture raised plants.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.311-312
• /
• 2012

Blade pitch control system monitors and adjusts angle of the blades and controls rotation speed of blades. This paper shows 2MW pitch system hardware and electric part. Blade pitch system consists of pitch drive, gear box, motor and energy storage. Fieldbus is base on CANopen protocol. Fail-Safe system moves the blades to a safety position in case of any fault condition. The super capacitor energy storage provides emergency back up to the Pitch servo driver during feathering the blades. This paper studied Blade pitch servo driver and a bi-directional DC-DC converter for fail-safe system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.719-722
• /
• 2005

In this paper, we present out recent progress in the LIPCA (Lightweight Piezo-Composite Actuator) application for actuation of a flapping wing device. The flapping device uses linkage system that can amplify the actuation displacement of LIPCA. The feathering mechanism is also designed and implemented such that the wing can rotate during flapping. The natural flapping-frequency of the device was about 9 Hz, where the maximum flapping angle was achieved. The flapping test under 5 Hz to 15 Hz flapping frequency was performed to investigate the flapping performance by measuring the produced lift and thrust. Maximum lift and thrust were produced when the flapping device was actuated at about the natural flapping-frequency.