• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.11
• /
• pp.1581-1587
• /
• 2021

As embedded system are used widely and variously, multi-edge system, which multiple edges gather and perform complex operations together, is actively operating. In a multi-edge system, it often occurs that an abnormal operation at one edge is transferred to another edge or the entire system goes down. It is necessary to determine and control edge anomalies in order to prevent system down, but this can be a heavy burden on the resource-limited edge. As a solution to this, we use power consumption data to check the state of the edge device and transmit it based on a QRcode to check and control errors at the server. The architecture proposed in this paper is implemented using 'chip-whisperer' to measure the power consumption of the edge and 'Raspberry Pi 3' to implement the server. As a result, the proposed architecture server showed successful data transmission and error determination without additional load appearing at the edge.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.5
• /
• pp.61-73
• /
• 2009

Many software reliability growth models(SRGM) have been proposed since the software reliability issue was raised in 1972. The technology to estimate and grow the reliability of developing S/W to target value during testing phase were developed using them. Most of these propositions assumed the S/W debugging testing efforts be constant or even did not consider them. A few papers were presented as the software reliability evaluation considering the testing effort was important afterwards. The testing effort forms which have been presented by this kind of papers were exponential, Rayleigh, Weibull, or Logistic functions, and one of these 4 types was used as a testing effort function depending on the S/W developing circumstances. I propose the methology to evaluate the SRGM using least square estimater and maximum likelihood estimater for those 4 functions, and then examine parameters applying actual data adopted from real field test of developing S/W.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.05a
• /
• pp.505-508
• /
• 2021

반도체 회로의 미세화로 단위 공정이 증가하면 TAT(turn-around time) 증가에 따른 제조 비용이 늘어난다. 반도체 공정 중 포토 공정은 마스크의 회로를 웨이퍼에 전사하는 공정으로 전사를 담당하는 노광장비의 성능에 의해 회로의 정확성이 결정된다. 이런 정확성을 검증하는 계측공정은 회로의 미세화가 진행될수록 필요성은 증가하나 TAT 증가의 주된 요인으로 최근 기계학습을 사용한 다양한 예측 모형들의 개발로 계측 결과를 예측하는 실험들이 진행되고 있다. 본 논문은 노광장비 센서들의 이상값을 감지하여 분류 후 계측공정을 진행하는 LFDC(Lithography Fault Detection and Classification) 시스템의 문제인 분류 성능이 떨어지는 것을 해결하기 위해 XGBoost를 사용하여 계측공정을 진행하지 않고 노광장비 센서의 이상값을 학습된 학습기를 통해 분류하여 포토 공정을 재진행하거나 다음 공정을 진행하는 방법을 실험하였다. 실험에서 사용된 계측 결과 예측 모형은 89%의 정확도를 확보하였고 반도체 데이터 특성인 심각한 불균형의 데이터에 대해서도 같은 정확도를 얻었다. 이런 결과는 노광장비 센서들의 이상값에 대해 89%는 정상으로 판단하였고 정상으로 판단한 웨이퍼를 실제 계측 시 예측과 같은 결과를 얻었다. 계측 결과 예측 모형을 사용하면 실제 계측을 진행하지 않고 노광장비 센서들의 이상값에 대한 판정을 할 수 있어 TAT 단축으로 제조 비용감소, 계측 장비 부하 감소 및 효율 향상을 할 수 있다. 하지만 본 논문에서는 90%의 성능을 보이는 계측 결과 예측 모형으로 여전히 10%에 대해서는 실제 계측이 필요한 문제에 대해 추후 더 연구가 필요하다.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.3 s.309
• /
• pp.30-38
• /
• 2006

In this paper, we improved to drops recognition rate according to distance using distance and depth information with 3D from stereo face images. A monocular face image has problem to drops recognition rate by uncertainty information such as distance of an object, size, moving, rotation, and depth. Also, if image information was not acquired such as rotation, illumination, and pose change for recognition, it has a very many fault. So, we wish to solve such problem. Proposed method consists of an eyes detection algorithm, analysis a pose of face, md principal component analysis (PCA). We also convert the YCbCr space from the RGB for detect with fast face in a limited region. We create multi-layered relative intensity map in face candidate region and decide whether it is face from facial geometry. It can acquire the depth information of distance, eyes, and mouth in stereo face images. Proposed method detects face according to scale, moving, and rotation by using distance and depth. We train by using PCA the detected left face and estimated direction difference. Simulation results with face recognition rate of 95.83% (100cm) in the front and 98.3% with the pose change were obtained successfully. Therefore, proposed method can be used to obtain high recognition rate with an appropriate scaling and pose change according to the distance.

• The Journal of Engineering Geology
• /
• v.7 no.2
• /
• pp.113-126
• /
• 1997

Electrical resistivity methods of dipole - dipole array profiling and Schiumberger array sounding were tested on a segment of the Woraksan granitic batholith for the research into the imaging of irregular attitudes of fracture zones in the crystaaline rock in terms of processing and interpretation schemes. By the dipole - dipole array method, inhomogeneities such as small scale of fracture zones were properly delineated down at some depth even within hard rock environment. Fracture zones were interpreted to be at the boundaries between the high amplitude zone and very low amplitude zone in the resistivity plot and they were also successfully outlined in two - dimensional layer and pseudo - three - dimensional volume constructed by the incorporation of vertical sounding data. The surface location of the fracture zones was correlated by the zero - crossing point in the VLF(very low frequency) electromagnetic data. Pseudo - three - dimensional attitudes of fracture zones were efficiently illuminated by optimum projection angle. The mean of bulk resistivity for the Woraksan granite and the near fracture zones is estimated to be approximately of 4,000 ohm - m which is much higher than the value of 700 ohm - m for the Rwachunri limesilicate environment. This difference is due to both the rock type, i.e., biotite granite vs limesilicate, and the occurrence of secondary openings of fold and fault associated with the intrusion of granite. In this study statistical analyses on the resistivity color plot were performed in terms of three representative statistical moments, i.e., standard deviation, skewness, and kurtosis. The fracture zones in the standard deviation plot were characterized by the higher value, compared to the value of homogeneous portion. The upper boundary of the high resistivity zone was also successfully delineated in the skewness and kurtosis plots.

• Journal of KIISE
• /
• v.42 no.4
• /
• pp.434-441
• /
• 2015

Next generation memory technologies, which we denote as 'new memory', have both non-volatile and byte addressable properties. These characteristics are expected to bring changes to the conventional computer system structure. In this paper, we propose a fast boot technique for hybrid main memory architectures that have both new memory and DRAM. The key technique used for fast booting is write-tracking. Write-tracking is used to detect and manage modified data detection and involves setting the kernel region to read-only. This setting is used to trigger intentional faults upon modification requests. As the fault handler can detect the faulting address, write-tracking makes use of the address to manage the modified data. In particular, in our case, we make use of the MMU (Memory Management Unit) translation table. When a write occurs to the boot completed state, write-tracking preserves the original state of the modified address of the kernel region to a particular location, and execution continues. Upon booting, the fast booting process restores the preserved data to the original kernel region allowing rapid system boot-up. We develop the fast booting technique in an actual embedded board equipped with new memory. The boot time is reduced to less than half a second compared to around 15 seconds that is required for the original system.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.404-415
• /
• 2000

This paper describes several performances and nondestructive inspection for deterioration due to forest fires in overhead transmission lines. After discussing corrosion mechanism such as atmospheric and galvanic corrosion for aged ACSR conductors and its detection for them are presented. Through impedance analysis of a solenoid coil, it is shown that the eddy current sensor may be available to inspect severe fault or local corrosion. As the solenoid coil changes its impedance when the test conductor is inserted into the coil, it can be possible to measure deterioration degree caused by forest fires. Tensile strength, extension rate and sensor impedance are tested for some samples degraded by artificial fire. As increasing blazed period to some extent, the strength of aluminum strand begins to be reduced remarkably, while galvanized steel strand holds the similar strength to the initial value, despite of appearing a little loss of zinc layer. In general, it is shown that the sensor impedance would be increased while the tension load of conductor is reduced and the extension rate is contrarily increased. Therefore, the sensor output could exhibit the changes of mechanical performances, and would be used to detect such deterioration caused by forest fire in ACSR conductors built on the ridge of mountains. Finally, it was verified that the solenoid coil could be applicable to obtain any crucial inform for serious deterioration due to forest fires.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.28-28
• /
• 2011

우리나라의 주력산업인 반도체 및 디스플레이의 경우 그 생산 설비의 1/3이상이 진공 장비이며 진공 공정을 통해 만들어진다. 이들 산업 분야에서는 우리나라가 세계 최고의 생산 기술을 가지고 있으므로 자체적인 기술 개발 확보가 중요하다. 최근에는 기존에 개발되어 있는 장비의 성능을 뛰어넘어야 하는 공정 기술력이 요구되면서, 진공 공정 기술 개발이 매우 중요한 이슈가 되었다. 반도체나 디스플레이 산업 등 기존 주력산업의 전후방 산업의 경쟁력 강화 측면에서뿐 아니라 태양전지, LED 등 진공기술을 이용한 신성장 동력 산업의 생산 시스템 경쟁력 확보 측면에서도 진공 공정 기술 개발 중요성은 매우 크다. 지금까지 양산에 적용되는 증착, 식각, 확산 등 진공 공정 운영은, 사전 시험을 통해 얻은 최적 공정의 입력 파라미터들을 정해 놓고 그대로 공정을 진행한 뒤, 생산되어 나오는 제품의 상태를 사후 측정하여 공정 이상 여부를 점검하고 미세 조정하는 형태로 진행되고 있다. 실질적으로 현재 진행 중인 진공 공정에 대한 직접적인 정보가 없으므로 공정 중 발생되는 문제들에 대한 대처는 그 공정이 끝난 후에 이루어지는 상황이다. 공정 미세화 및 대구경화에 따라 기존의 wafer to wafer 제어 개념 보다 발전된 개념으로 센서 기반 실시간 공정 진단 제어 기술의 필요성이 대두되었으며 이를 위한 오류 인식 및 예지기술 (Fault Detection & Classification, FDC) 그리고 이 정보를 이용한 첨단 제어 기술(Advanced Process Control, APC)을 개발하는 노력들이 시작되었다. 한국표준과학연구원에서는 수요기업인 대기업과 장비업체, 센서 개발 중소기업 및 학교 연구소와 공동으로 진공 공정 실시간 측정 진단 제어와 관련된 연구를 하고 있다. 진공 공정 환경측정 기술, 플라즈마 상태 측정 기술, 진공 공정 중 발생하는 오염입자 측정 원천 기술 개발과 이를 구현하기 위한 센서 개발, 화학 증착 소스 및 진공 공정 부품용 소재에 대한 평가 플랫폼 구축, 배기 시스템 진단기술 개발 등 현재 진행되고 있는 기술 개발 내용과 동향을 소개한다. 진공 공정 실시간 측정 기술이 확보되면 차세대 반도체 제작에 필요한 정밀 공정 제어가 가능해지고, 공정 이상에 바로 대응 혹은 예방 할 수 있으며, 여유분으로 필요 이상으로 투입되던 자원(대기시간, 투입 재료, 대체용 장비)을 절감하는 등 생산성을 향상을 기대할 수 있다. 또한 진공 환경에서 이루어지는 박막 증착, 식각 공정 과정에 대한 이해가 높아지고, 공정을 개발하고 최적화하는데 유용한 정보를 제공할 수 있으므로, 기존 장비와 차별화된 경쟁력을 가진 고품위 진공 장비 및 부품 개발에 기여할 수 있을 것으로 기대하고 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.255-257
• /
• 2017

These days automotive markets are launching models that include a variety of IT technologies. Tesla's Tesla model S and Google's unmanned automobiles are emerging one after another. This type of automobile with IT technology provides various convenience to the driver and the driver is getting benefit by various conveience services. on the contrary, it is also true that defects for errors in electronic components cause accidents that threaten the safety of drivers. There is a sudden unintended acceleration among these accidents. The cause of the accident is not clear yet, but the claim that the ECU device caused by the magnetic field causes accident of the car due is the most reliable. But, in Korea, when occur a car sudden unintended acceleration accident, the char maker often claims that an accident occurred due to driver's pedal malfunction. Also most drivers are responsible for the lack of grounds to refute. In this paper, the pedal operation image of the driver is acquired and the sensor is attached to the control part such as the excel and brake so as to discriminate whether the vehicle sudden unintended acceleration accident is the driver's pedal operation error or the fault of. i have implemented a system that can do this.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.67-73
• /
• 2016

Recently, wireless power transmission has attracted much interest and is the subject of much research in industry and academia. As its name implies, it is a technology which involves transferring power without wires. This paper presents the design of an ICT-based wireless power transmission system. The proposed system consists of a wireless transceiver unit and high-efficiency coil unit, which can increase both the transmission efficiency and the effective power distance. In particular, the wireless transceiver unit was designed to work with the ICT technique to enable real-time remote monitoring. Also, studies were done relating to the effect of reducing the standby power. The optimal frequency of IGBT devices used in industrial wireless power systems of 20[KHz] was utilized. The values of $23.9[{\mu}H]$ and $2.64[{\mu}F]$ were selected for L and C, respectively, through many field experiments designed to optimize the system design. In addition, an output current controlling algorithm was developed for the purpose of reducing the standby power. The results presented in this paper represent a 75[%] to 85[%] higher power transmission efficiency with a 10[%] increase in the effective power transmission distance compared with the existing systems. As a result, the proposed system exhibits a lower standby power and maintenance costs. Also, the designed wireless transceiver unit facilitates fault detection by means of user acquired data with the development of the ICT applied program.