• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.289-293
• /
• 2007

The fault current limiting characteristics of the separated and the integrated three-phase flux-lock type superconducting fault current limiters (SFCLs) were analyzed. The three-phase flux-lock type SFCL consisted of three flux-lock reactors and three $high-T_c$ superconducting (HTSC) elements. In the integrated three-phase flux-lock type SFCL, three flux-lock reactors are connected on the same iron core. On the other hand, three flux-lock reactors of the separated three-phase flux-lock type SFCL are connected on three separated iron cores. The integrated three-phase flux-lock type SFCL showed the different fault current limiting characteristics from the separated three-phase flux-lock type SFCL that the fault phase could affect the sound phase, which resulted in quench of the HTSC element in the sound phase. Through the computer simulation applying numerical analysis for its three-phase equivalent circuit, the fault current limiting characteristics of the separated and the integrated three-phase flux-lock type SFCLs according to the ground fault types were compared.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.443-453
• /
• 2019

As the core component of transmission systems, converters are very prone to failure. To improve the accuracy of fault diagnosis for wind power converters, a fault feature extraction method combined with a wavelet transform and compressed sensing theory is proposed. In addition, an improved AdaBoost-SVM is used to diagnose wind power converters. The three-phase output current signal is selected as the research object and is processed by the wavelet transform to reduce the signal noise. The wavelet approximation coefficients are dimensionality reduced to obtain measurement signals based on the theory of compressive sensing. A sparse vector is obtained by the orthogonal matching pursuit algorithm, and then the fault feature vector is extracted. The fault feature vectors are input to the improved AdaBoost-SVM classifier to realize fault diagnosis. Simulation results show that this method can effectively realize the fault diagnosis of the power transistors in converters and improve the precision of fault diagnosis.

• Structural Engineering and Mechanics
• /
• 제28권4호
• /
• pp.411-442
• /
• 2008

Ground motions in near source region of large crustal earthquakes are significantly affected by rupture directivity and tectonic fling. These effects are the strongest at longer periods and they can have a significant impact on Engineering Structures. In this paper, it is aimed to determine near-fault ground motion effects on the nonlinear response of dams including dam-reservoir-foundation interaction. Four different types of dam, which are gravity, arch, concrete faced rockfill and clay core rockfill dams, are selected to investigate the near-fault ground motion effects on dam responses. The behavior of reservoir is taken into account by using Lagrangian approach. Strong ground motion records of Duzce (1999), Northridge (1994) and Erzincan (1992) earthquakes are selected for the analyses. Displacements, maximum and minimum principal stresses are determined by using the finite element method. The displacements and principal stresses obtained from the four different dam types subjected to these nearfault strong-ground motions are compared with each other. It is seen from the results that near-fault ground motions have different impacts on the dam types.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1130-1132
• /
• 2004

In this paper, we investigated the operational characteristics of the fault current limiting in the The flux-lock type high-Tc superconducting fault current limiter. The flux-lock type high-Tc superconducting fault current limiter was consisted of primary and secondary copper coils that flux was locked on iron core and YBCO thin film. The operational characteristic of a flux-lock type SFCL dependent on winding direction of coil 1 and coil 2, and the number of turns of coil 1 and coil 2, inductances of the coils, saturation in iron core, the properties of superconducting element etc. In this cases, we investigated the fault currents limiting characteristics of the flux-lock type SFCL when winding direction of coil 1 and coil 2 was subtractive polarity winding.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.255-258
• /
• 2003

The hysteresis characteristics of flux-lock reactor, which is an essential component of flux-lock type superconducting fault current limiter (SFCL), was investigated. The hysteresis loss of iron core in flux-lock type SFCL does not happen due to its winding's structure especially in the normal state. From the equivalent circuit for the flux-lock type SFCL and the fault current limiting experiments, the hysteresis curves could be drawn. Through the hysteresis curves together with the fault current level due to the inductance ratio for the 1st and 2nd winding, the increase of the number of turns in the 2nd winding of the flux-lock type SFCL had a role to prevent the iron core from saturation.

• 지질공학
• /
• 제18권2호
• /
• pp.145-152
• /
• 2008

단층의 내부 구조가 잘 구분되는 하나의 단층핵이 경주시 양북면 용당리 부근 작은 계곡에 인접하여 노출되어 있다. 단층핵의 중앙에는 약 25 cm두께의 단층비지대가 놓여 있으며 색깔에 의해 청회색 비지대와 녹황색 비지대로 구분된다. 현미경하에서 비지들은 옛 비지편, 석영, 장석, 철광물 등의 반상쇄편으로 구성되며 기질은 점토광물이 풍부하고 점토광물은 선택정렬하며 P엽리를 잘 발달시킨다. 청회색 비지와 녹황색 비지의 차이점은 녹황색 비지가 청회색 비지에 비해 점토광물이 훨씬 풍부하고, 반상쇄편의 수와 크기가 적으며, 철광물 또한 매우 풍부하고 철광물의 종류는 청회색 비지대에서 대부분 황철석인데 반해 주로 적철석으로 이루어진다. 이 적철석은 청회색 비지 형성 단층작용 시에 유입된 열수가 청회색비지대에 황철석을 침전시킬 동안 녹황색 비지대에는 기존의 황철석을 변질시켜 적철석을 형성한 것으로 생각된다. 단층핵 내 청회색 비지대와 녹황색 비지대는 점진적인 단층대 발달 단계를 거쳐 형성된 것으로 생각된다. 첫째 단계에서는 이른 단층작용이 시작되고 이에 수반되어 손상대가 생성되었다. 두 번째 단계는 손상대에서 반복적인 단열작용으로 각력대가 형성되었다. 세 번째 단계에서는 입자 마모와 연마작용이 활발하게 일어나며 녹황색 비지대가 발달하였다. 네 번째 단계에서 변형작용은 단층핵의 중심에서 옛 비지대(녹황색 비지대)가 변형경화로 비활동적으로 남을 때 단층핵의 연변을 향하여 새로운 비지대인 청회색 비지대가 생성되어 녹황색 비지대에 인접하여 부가되었으며 이로 인해 단층핵 내 비지대는 더 큰 폭으로 성장하였다. 비지대 내에서 청회색 비지대 생성 후 변형작용은 반상쇄편의 내부 파쇄작용과 혼합면열구조의 발달로 비지대 내 큰 변형이 수용되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.89-91
• /
• 2003

For the design to prevent the saturation of iron core and the effective fault current limitation, the analysis for the operation of the flux-lock type superconducting fault current limiter (SFCL) with consideration for the hysteresis characteristics of iron core is required. In this paper, the hysteresis characteristics of flux-lock reactor, which is an essential component of flux-lock type SFCL, was investigated. The hysteresis loss of iron core in flux-lock type SFCL does not happen due to its winding's structure especially in the normal state. From the equivalent circuit for the flux-lock type SFCL and the fault current limiting experiments, the hysteresis curves could be drawn. Through the analysis for both the hysteresis curves and the fault current limiting characteristics due to the number of turns for the 1st and 2nd winding, the increase of the number of turns in the 2nd winding of the flux-lock type SFCL had a role to prevent the iron core from saturation.

• 지질공학
• /
• 제26권2호
• /
• pp.277-290
• /
• 2016

심부지질조사에는 많은 경비와 시간이 필요해 심부지질을 해석하는데 많은 어려움이 있다. 그러나 지열모델링과 같이 많은 경비를 투자할 수는 없지만 심부의 지질정보가 필요한 경우 제한적이지만 천부의 지질정보를 이용하여 심부의 지질을 해석하고 추정할 수 있다. 이번 연구에서는 이러한 제한된 심부자료를 가진 지역에서 천부지질자료를 활용하여 어떻게 심부의 지질에 대한 정보를 추정할 수 있는지를 보여주고자 하였다. 이번 연구의 목적은 한반도 남동부를 관통하는 양산단층이 이 지역의 지열분포에 어떠한 영향을 주고 있는지를 연구하기 위하여 심부지질단면도를 획득하기 위한 것이다. 따라서 양산단층과 주변 단층들의 특징을 가장 잘 반영할 것으로 판단되는 울주군 상북면과 웅촌면 지역에서 양산단층을 가로지르는 NW-SE 방향으로 단면을 설정하였다. 이 심부 지질단면을 작성하기 위하여 먼저 기존 지질도를 검토하여 발달하는 암상의 분포와 주요 지질구조를 확인하였으며, 야외조사자료를 기반으로 도학적인 분석을 실시하여 지층의 심부연장성을 추정하였고, 지표에서 노출된 단층 등의 발달규모 및 자세를 통해 심부로의 연장가능성을 추정하였다. 또한 비록 천부자료이긴 하지만 기존 물리검층자료와 시추자료를 종합하여 한반도 남동부 양산단층대의 심부단면도를 작성하였다. 양산단층 주변의 암상에 대한 야외지질조사 결과 양산단층의 서쪽지괴에는 화강암이 주를 이루며, 양산단층의 동쪽지괴는 퇴적암류와 이를 관입한 화성암류가 주로 발달하고 있다. 지표상 드러난 양산단층의 연장성을 통해 규모를 추정해 볼 때 지하로 수 km 이상 발달할 것으로 추정되며, 물리검층자료를 분석한 결과 양산단층과 인접한 퇴적암류는 그 깊이가 얇고, 동쪽으로 갈수록 두꺼워지는 양상을 보인다. 이러한 자료를 종합 해석하여 모식적인 지질단면을 제작하였다. 비록 지질학적 개념에 기초하여 가능한 정보를 수집하였지만 이러한 천부자료에 기초한 심부단면도의 작성은 신뢰성이 매우 제한적이라는 것을 고려하는 것이 필요하다. 또한 이번 연구에서는 시추코어의 단열분석을 통해 단층의 존재를 인식할 수 있는 새로운 방법을 제시하였다. 이는 앞으로 시추자료 분석을 통해 단층의 존재와 규모를 판단하는데 매우 유용하게 활용될 수 있을 것으로 판단된다.

• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.689-693
• /
• 2009

We investigate the comparison of fault current characteristics between the separates three-phase flux-lock type superconducting fault current limiter(SFCL) and integrated three-phase flux-lock type superconducting fault current limiter(SFCL). The single-phase flux-lock type SFCL consists of two coils. The primary coil is wound in parallel to the secondary coil on an iron core and superconducting elements are connected to secondary coil in series. Superconducting elements are used by the YBCO coated conductor. The separated three-phase flux-lock type SFCL consists of single-phase flux-phase type SFCL in each phase. But the integrated three-phase flux-lock type SFCL consists of three-phase flux-reactors wound on an iron core. Flux-reactor consists of the same turn's ratio between coil 1 and coil 2 for each single phase. To compare the current limiting characteristics of the separated three-phase flux-lock type SFCL and integrated three-phase flux-lock type SFCL, the short circuit experiments are carried out fault condition such as the single line-to-ground fault. The experimental result shows that fault current limiting characteristic of the separated three-phase flux-lock type SFCL was better than integrated three-phase flux-lock type SFCL. And the integrated three-phase flux-lock type SFCL has an effect on sound phase.

• 한국전기전자재료학회논문지
• /
• 제23권2호
• /
• pp.164-168
• /
• 2010

The transformer is expected to be an essential component of a superconducting fault current limiter (SFCL) for both the increase of its voltage ratings and the simultaneous quench due to different critical current between high-$T_C$ superconducting (HTSC) elements comprising the SFCL. However, in order to perform the effective current limiting operation of the SFCL, the design for the SFCL considering the hysteresis characteristics of the iron core is required. In this paper, the influence of the hysteresis characteristics of the iron core comprising the transformer type SFCL on its current limiting characteristics was investigated. Through the comparative analysis on the hysteresis curves due to the ratio of the turn number between the 1st and the 2nd windings of the transformer, the proper design condition for the ratio of the turn number to achieve the effective current limiting operation of the transformer type SFCL could be obtained.