• 자원환경지질
• /
• 제43권6호
• /
• pp.637-648
• /
• 2010

옥천대의 북동변인 주천 지역에 분포하는 송봉층(소위 방림층군)은 선캠브리아 시대의 경기육괴 기반암위에 부정합 관계로 분포하며, 조선누층군의 하부 지층에 대비된다. 이것은 영남육괴와 조선누층군의 관계가 옥천대 남동변에서 역시 부정합이라는 사실과 함께 옥천대 양쪽 경계부의 기반암이 최소한 고생대 초에는 하나였을 것임을 의미한다. 주천 지역에서는 세 번의 변형작용이 인지된다. 첫 번째 변형작용에 의해서 선캠브리아 시대의 화강암이 연성전단대를 따라서 북북동 방향으로 옥천대의 고생대층 상위로 이동하였다. 두 번째 변형작용은 남동방향을 향한 충상단층운동과 이에 수반된 누루하지단층으로 특징 지워진다. 특히 누루하지단층을 경계로 하여 북동쪽 지괴와 남서쪽 지괴 사이에 변형작용 분리가 발생하였다. 세 번째 변형작용은 누루하지단층을 수 km의 변위를 갖는 우수향 주향이동단층으로 재활성시켰다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1451_1452
• /
• 2009

Owing to the increasing number of intelligent homes(or called Smart home), the corresponding cost is much higher. Low voltage circuit breakers are widely used in the intelligent homes to interrupt fault current rapidly and to assure the reliability of the power supply. The distribution of magnetic field induced by arc current in the contact system of molded case circuit breaker depends on the shape, arrangement, and kinds of material of grids. This paper is focused on understanding the interrupting capability, more specifically of the grid and the arc runner, based on the shape of the contact system in the current MCCB. The magnetic driving force was calculated by using the flux densities induced by the arc current, which are obtained by three-dimensional finite element method. There is a need to assure that the optimum design required to analyze the electromagnetic forces of the contact system generated by current and the flux density be present. This is paper present our computational analysis on contact system in MCCB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.109-110
• /
• 2007

Most transmission lines pass through mountainous terrain and deep valleys, to avoid populated areas. Accordingly, the impact of climate changes, environmental conditions and system expansion have caused an increase in transmission line system fault rates. KEPCO has developed and applied phase-spacers to reduce contact faults between phases. Contact between phases represented 9% of total line faults before the devices were installed. Phase-spacers have reduced faults by up to 3.4% since the phase-spacers were installed in 2005. Also, recently developed devices provide additional economic benefits as they cost about a third of the price as similar devices introduced in foreign countries. Phase-spacers are an effective way to prevent phase contact accidents by maintaining physical space between phases. These spacers will be implemented in areas where contacts are likely to occur. They are expected to reduce accident rates and improve power quality.

• 암석학회지
• /
• 제18권1호
• /
• pp.19-30
• /
• 2009

울산시 울주군 언양읍 북부 신흥마을 입구에 북서-남동 방향으로 트렌치된 단면에서 양산단층대의 주단층과 제4기 단층이 관찰되었다. 본 논문은 신흥마을 입구의 트렌치 단면에서 조사된 양산단층대의 기반암 단층(신흥단층)과 제4기 단층(제4기 신흥단층)의 기하학적 운동학적 특성연구로부터 양산단층대 남부의 단층 운동사를 해석하였다 신흥마을 입구 트렌치 단면에서는 단층접촉으로 반복되어 산출하는 백악기 하양층군의 퇴적암류와 유천층군의 화산암류 그리고 이들 기반암류를 부정 합으로 피복하는 제4기 퇴적층 등이 산출하고, 본 연구결과 양산단층대의 형성과 관련된 적어도 2회의 주향-이동 단층운동 (D1, D2)과 이후 적어도 2회의 역-이동 단층운동(D3, D4)이 인지된다 (1) D1 단층운동: 양산단층대의 주 단층을 향하여 퇴적암류의 층리를 고각화시키는 주향-이동 단층운동. (2) D2 단층운동: 고각화된 층리를 단층면으로 하는 우수 주향-이동 단층운동 주요 특징적인 구조요소로서는 북북동 방향의 준 수평적인 우세한 단층조선과 준 수직적인 우세한 단층엽리 등이 있다. 양산단층대의 주요 단층암류는 D2 단층운동에 의해 형성되었다. (3) D3 단층운동: (동) 북동 주향에 (남)남동 내지 (북)북서 방향으로 중각 경사하는 단층면을 갖는 공역성 역-이동 단층운동 주요 특징적인 구조요소로서는 주향 방향의 단층조선을 중첩하는 경사 방향의 단층조선, D2 단층비지에 발달하는 S-C 구조 엽리, 비탈과 평탄 기하의 단층면, 단층운동에 수반된 비대칭 및 끌림 습곡과 붕괴구조 등이 있다. 양산단층대 주 단층면의 방향성은 주로 D3 단층운동에 의해 분산되었다. (4) D4 단층운동: 제4기 퇴적층내에 5-C 구조 엽리의 발달과 함께 제4기 퇴적층을 수 cm 변위시키는 제4기 역-이동 단층운동 양산단층대의 다른 제4기 단층과 같이 D4 단층면은 기반암의 D3 역-이동 단층면의 연장선상에 놓이고, 이들 단층은 동일한(북)북서-(남)남동 방향의 압축응력에 의해 형성되었다.

• 자원환경지질
• /
• 제23권2호
• /
• pp.215-219
• /
• 1990

Geological and electrical resistivity surveys along the survey line of about 3 km between Kyungsangbukdo Youngilgun Hodong and Gwangmyungdong using by dipole-dipole electrode array method were carried out to examine the boundary and structural relationship between Tertiary Pohang and Janggi basins. Electrical resistivity data were interpreted qualitatively and quantitatively by means of pseudosection of apparent electrical resitivity distribution and finite difference method for two dimensional geologic structure model. The nearly vertical fault zone with low electrical resistivity value of 1-5 Ohm-m and widths of about 200m at the surface and 400 m at depth exists around 1.2 km west of national road between Ocheoneup and Yangbukmyun. Mudrocks, sandstones and tuffaceous rocks are widely distributed with electrical resistivity values of 6-77 Ohm-m. Especially, tuffaceous rocks with relatively high electrical resistivity value are predominant at eastern side of fault zone. Consequently, it is known that Pohang and Janggi basins are in fault contact.

• 자원환경지질
• /
• 제24권2호
• /
• pp.177-186
• /
• 1991

Ogchon Supergroup directly contacts with Choseon Supergroup in the northern area of Worak-san, where evidences indicating thrust-fault formed during $D_2$-deformation are observed. On footwall of thrust fault, calcite veins in Gounri Formation belonging to Choson Supergroup may be deformed during thrust faulting($D_2$). Calcite veins are parallel to axial plane cleavage($S_2$) of $F_2$ fold and truncate slaty cleavage($S_1$). Therefore, we can use deformation twins in calcite grains of the veins as a marker for inferred differential stress operated upon thrust faulting. The inferred differential stresses are estimated at 190 Mpa from K, sample. The stress from K, sample close to the contact between Ogchon Supergroup and Choseon Supergroup shows a higher value than $K_2$-$K_6$ samples, probably having an important influence upon thrust faulting. The differential stress reveal again high value at $K_7$ sample, which may suggest the presence of another thrust fault.

• 전기학회논문지P
• /
• 제56권4호
• /
• pp.195-200
• /
• 2007

This paper describes the countermeasures for preventing the electric shock which can be occurred in the low-voltage handhole underwater. Low-voltage handholes were designed and made for the test in the testing field. Which were installed 4 cases. a metal handhole cover was employed in case 1; FRP(Fiber glass Reinforced Plastic) handhole cover in case 2; an insulated rubber was put on the joint of the cables in case 3; the exposed conductors(cover, frame etc) were commoned and grounded in case 4. Thus, an ground potential near the low-voltage handhole was measured and evaluated quantitatively for the 4 cases. The measured results show that the potential of case 2.3 were lower than that of case 1 because the insulated rubber and the FRP cover prevented direct contact to the fault point. The case 4 is the lowest among the 4 cases because the common and grounding helps the fault current release into the ground, which makes the ground potential rise lower. As a result, although each case has the defects, these ways can effectively lower the electric shock risk in the low-voltage handhole.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.699-704
• /
• 2005

In the station of the railway and the subway various illumination equipment and a general power equipment for a passenger convenience, the signal equipment and the communication equipment which is necessary to the train operation provided. At the all of like this equipment from the electric room which is established in each station by changing from high voltage to low voltage and it supplies from the illumination transformer, the power transformer and the signal transformer. If it supplies to the equipment from the high voltage to the low voltage, it must be established to contact protection device in between the high voltage coil and the low voltage coil. Also it must do the grounding faulting device at the low voltage lines, the earthing devices at apparatus for the protection of an electric shock and an electric fire by the electric relation law. Compared the related regulations between the facilities which require protective functions such as grounding fault or earthing in public utilities like subway stations, and the facilities which do not require line earthing or protective functions such as electricity supplied for signalling the train. Also, will describe a countermeasure for the accident from a grounding fault.

• Smart Structures and Systems
• /
• 제30권5호
• /
• pp.433-446
• /
• 2022

Despite efforts to reduce unexpected accidents at confined construction sites, choking accidents continue to occur. Because of the poorly ventilated atmosphere, particularly in long, confined underground spaces, workers are subject to dangerous working conditions despite the use of artificial ventilation. Moreover, the traditional monitoring methods of using portable gas detectors place safety inspectors in direct contact with hazardous conditions. In this study, a long-range (LoRa)-based wireless safety monitoring system that features the network organization, fault-tolerant, power management, and a graphical user interface (GUI) was developed for underground construction sites. The LoRa wireless data communication system was adopted to detect hazardous gases and oxygen deficiency within a confined underground space with adjustable communication range and low power consumption. Fault tolerance based on the mapping information of the entire wireless sensor network was particularly implemented to ensure the reliable operation of the monitoring system. Moreover, a sleep mode was implemented for the efficient power management. The GUI was also developed to control the entire safety-monitoring system and to manage the measured data. The developed safety-monitoring system was validated in an indoor testing and at two full-scale water pipeline construction sites.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1241-1243
• /
• 2002

This study presents a AC electric railway system analysis using PSCAD/EMTDC for circuit analysis and fault studies. This PSCAD/EMTDC model includes feeder, contact line, rails. Scott-transformer. Auto-transformer and so on. This model is based on four-port network which is an extension of two-port network theory. In order to verify the proposed model, fault studies of a test system are performed.