• 정보처리학회논문지A
• /
• 제11A권3호
• /
• pp.157-162
• /
• 2004

본 논문에서는 가상 메모리 압축 알고리즘으로 CAMD 알고리즘을 제안한다. CAMD 알고리즘은 페이지 폴트가 일어났을 때 이들 페이지들을 스왑 디바이스로 이동시키지 않고 주기억장치 내의 압축된 캐시 영역을 할당하여 압축된 페이지를 저장한다. 이렇게 함으로써 스왑 디바이스로 이동하는 시간과 횟수를 감소시켜서 페이지 폴트 응답시간을 줄이며 주기억장치에 저장되는 페이지들의 공간 활용도를 높일 수 있다. 메모리 내의 데이터는 일반적인 압축 알고리즘에서 다루는 데이터와는 다른 특징들을 가지고 있어서 메모리 내의 주소 값이나 배열 데이터와 값은 요소들을 고려하여 압축될 때의 효율성을 높일 수 있다.

• 전기학회논문지
• /
• 제59권3호
• /
• pp.506-514
• /
• 2010

Defense systems are needed to prevent catastrophic failures of a power grid due to cascaded events. Cascaded events can be occurred by power flow overload. Especially, it is the most dangerous problem that overload line is outage, because it can make the power system face danger of cascaded. In this paper, vulnerability evaluation for monitoring wide are outage is proposed using by configuration information of transmission systems. This method of vulnerability evaluation is considered direct effect and indirect effect of power flow, especially overload. What is more, it can be used when the configuration of power system changes, as simple fault occurs or maintenance of facility. In the case studies, the estimation and simulation network have been testified and analysed in PSSE and C programming.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1281-1286
• /
• 2009

As a general radial configuration of power distribution system, the various researches have being studied to change a radial configuration to network one such as smart, intelligent and micro grid for loop operation. If a radial configuration changes to network, protective coordination comes to the biggest problem. When a typical protective algorithm is applied to loop distribution system protection, the interrupted section is expanded, therefore, reliability grows worse. This paper presents the new protective method being able to apply to loop distribution system with Distribution Automation System (DAS) which separate the minimal faulted section. Through contingency analysis of the sustained and momentary fault, we analyzed the influence for radial configuration and loop configuration using interrupted area and proved the effectiveness of proposed method.

• Journal of Electrical Engineering and Technology
• /
• 제4권2호
• /
• pp.168-174
• /
• 2009

An application of wavelet analysis to power system transient generated signals is presented in this paper. With the time-frequency localisation characteristics embedded in wavelets, the time and frequency information of a waveform can be presented as a visualised scheme. This feature is very important for non-stationary signals analysis such as the ones generated from power system disturbances. Unlike the Fourier transform, the wavelet transform approach is more efficient in monitoring fault signals as time varies. For time intervals where the function changes rapidly, this method can zoom in on the area of interest for better visualisation of signal characteristics.

• 전기학회논문지
• /
• 제66권10호
• /
• pp.1460-1465
• /
• 2017

Outage areas can be transferred to adjacent feeders to restore power supply in case of the fault on the distribution system. Feeders in the small island or mountain area may not have backup feeders due to the low density of load. In this weakly meshed open loop system, BESS can be used as a backup feeder to improve reliability of power supply. This paper proposes a new network reconfiguration method for BESS based service restoration. Fuzzy decision making technique is adopted to deal with fuzziness of service restoration planning rules. Case studies using KEPCO real distribution system have been performed to verify feasibility of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.374-375
• /
• 2011

This paper presents a method to determine parameters of BTB (back-to-back) converters in terms of the enhancement of interface flow margins. Interface flow margin is by definition a measure of how much active power can be transferred from the external areas to the study area with the fixed load demand, and it is mainly constrained by system voltage stability. BTB converters are controllable equipments with the active power flow through them, and its DC link in fact can divide the AC systems at the location and hence can reduce the fault current level. This paper first cals margin sensitivities at the nose point of F-V curves and formulates an optimization problem to update the BTB parameters to improve the margins. This procedure is repeated performed until the required margin enhancement is achieved.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 가을 학술발표논문집 Vol.29 No.2 (3)
• /
• pp.469-471
• /
• 2002

그리드 컴퓨팅 시스템은 광범위한 지역에 분산된 고성능 자원, 대용량 정보 및 혁신적인 애플리케이션 등을 네트워크로 연결하여 마치 단일 컴퓨터를 사용하는 것처럼 자원을 상호공유하고 이용할 수 있도록 지원한다. 광범위 분산 컴퓨팅 시스템(wide area distributed computing systems)인 그리드 역시 분산 컴퓨팅 시스템과 같이 각 자원의 결함발생 가능성이 존재한다. 그리드 컴퓨팅 시스템에서도 결함은 작업수행에 있어서 치명적일 수 있기 때문에 결함 포용 기능은 필수적인 요소이다. 하지만 그리드 컴퓨팅 환경을 제공하는 글로버스(globus) 미들웨어에는 결함 포용 기능이 포함되어 있지 않다. 이에 본 연구에서는 그리드 컴퓨팅 시스템에서 QoS(quality of service)을 고려하여 프로세스, 프로세서, 네트워크 결함을 정의하고, 정의된 결함이 발생할 경우 결함을 탐지하고 해결하는 방법을 제안한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.280_281
• /
• 2009

The past 3 years study on the lightning faults data shows that the main reason is shielding failure rather than back flashover. Accordingly, we need to thoroughly consider about shielding failure angle of tower. Also, transmission line damage caused by shielding can be minimized if we avoid the steep slope area as a transmission line route.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.91_92
• /
• 2009

As the increasing integrity of VLSI, the BIST(Built-In Self Test) is used as an effective method to test chips. Generally the pseudo-random test pattern generation is used for BIST. But it requires too many test patterns when there exist random resistant faults. Therefore we propose a mixed test scheme which applies to the circuit under test, a deterministic test sequence followed by a pseudo-random one. This scheme allows the maximum fault coverage detection to be achieved, furthermore the silicon area overhead of the mixed hardware generator can be reduced.

• 전기학회논문지
• /
• 제56권5호
• /
• pp.821-828
• /
• 2007

This paper proposes a new algorithm to find optimal location of open switches connecting feeders in distribuion system. In order to enhance power system reliability by minimizing outage area in case of fault, the load balance among the facilities such as transformers and feeders is considered to optimize. The combination of optimal position of normal open switches can be found by moving tie along the direct path connecting two feeders related to the open switch while the whole optimization problem is separated into many small problems. The proposed algorithm is shown by case study results that, it is simple and takes short calculation time to apply to the DAS (Distribution Automation System) in KEPCO (Korea Electric Power Cooperation).