• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.205-210
• /
• 2015

In this paper, microalgae lipid extractions were performed using conventional organic solvent and supercritical carbon dioxide (SC-$CO_2$) for biodiesel-convertible lipid fractions. The highest levels (58.31%) of fatty acid methyl ester (FAME) content in the lipid extracted by SC-$CO_2$ was obtained, and 18.0 wt.% crude lipid yield was achieved for Bligh-Dyer method. In the SC-$CO_2$ extraction, methanol as a co-solvent was applied to increase the polarity of extract. The experimental results indicated that crude lipid yield, FAME content and yield extracted by combination of SC-$CO_2$ with methanol were 12.5 wt.%, 56.32% and 7.04 wt.%, respectively, and this method could reduce the extraction time from 2 hour to 30 min when compared to SC-$CO_2$ extraction. Therefore, SC-$CO_2$ extraction is proven to be an environmentally-friendly and an effective method for lipid extraction from microalgae.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.6
• /
• pp.1164-1168
• /
• 2011

This study evaluated the soil microbial communities by fatty acid methyl ester (FAME) method in soils (6 sites for immatured paddy, 9 sites for normal paddy, and 5 sites for sandy paddy) in Gyeongnam Province. The soil microbial biomass carbon content in normal and sandy paddy were 1,235 and $441mg\;kg^{-1}$, respectively, showing the soil microbial biomass carbon content in normal paddy was higher than that in sandy paddy. The soil organic matter contents $33g\;kg^{-1}$ of immatured and normal paddy were higher than sandy paddy $18g\;kg^{-1}$ (p<0.05). The communities of total bacteria and Gram-negative bacteria in normal paddy were significantly higher than those in sandy paddy (p<0.05). Total bacteria communities should be considered as a potential responsible factor for the obvious microbial community differentiation.

• Natural Product Sciences
• /
• v.20 no.3
• /
• pp.160-169
• /
• 2014

44 compounds and 9 minerals were isolated from and detected in the New Zealand deer velvet antler Cervus elaphus var. scoticus L$\ddot{o}$nnberg. The chemical structures of (1 - 26) were identified on the basis of the spectroscopic methods and comparisons with literature, respectively. The structures were identified as cholesterol (CS, 6), 7-keto-CS (7), $7{\beta}$-hydroxy-CS (8), and $7{\alpha}$-hydroxy-CS (9), and included 12 steroid $3{\beta}$-O-(palmitic/stearic/myristic acid esters; PM/SA/MS) [CS-$3{\beta}$-O-PM (1 - 1), CS-$3{\beta}$-O-SA (1 - 2), CS-$3{\beta}$-O-MR (1 - 3), 7-keto-CS-$3{\beta}$-O-PM (2 - 1), 7-keto-CS-$3{\beta}$-O-SA (2 - 2), 7-keto-CS-$3{\beta}$-O-MR (2 - 3), $7{\beta}$-hydroxy-CS-$3{\beta}$-O-SA (3 -1), $7{\beta}$-hydroxy-CS-$3{\beta}$-O-PM (3 - 2), $7{\beta}$-hydroxy-CS-$3{\beta}$-O-MR (3 - 3), $7{\alpha}$-hydroxy-CS-$3{\beta}$-O-SA (4 - 1), $7{\alpha}$-hydroxy-CS-$3{\beta}$-O-PM (4 - 2), and $7{\alpha}$-hydroxy-CS-$3{\beta}$-O-MR (4 - 3)], dinonyl phthalate (5), 8 nucleic acids analogues [uracil (10), deoxyguanosine (11), deoxyuridine (12), uridine (13), deoxyadenosine (14), adenosine (15), inosine (16), and guanosine (17)], and the 9 free amino acids [L-phenylalanine (18), L-isoleucine (19), L-leucine (20), L-tyrosine (21), L-valine (22), L-proline (23), L-threonine (24), L-alanine (25), and L-hydroxyproline (26)]. Also, there are 8 kinds of amino acids [asparagine, serine, glutamine, glycine, histidine, arginine, methionine, and lysine], 2 sialic acids [N-acetylneuraminic acid (27), ketodeoxynonulosonic acid (28)], and 9 minerals [Na > K > Ca > Mg > Fe > Zn > B > Al > Cu] were detected from the autoaminoacid analyzer and ICP spectrometer, HPAEC-PAD/HPLC-FLD, respectively. 9 kinds of oxycholesterol-$3{\beta}$-O-fatty acid ester (2 - 1, 2 - 2, 2 - 3, 3 - 1, 3 - 2, 3 - 3, 4 - 1, 4 - 2, and 4 - 3) and 3 nucleic acids (12, 14, and 15) were isolated from the velvet antler for the first time. 6 kinds of steroids (7, 8, 9, 2 - 1, 3 - 1, and 4 - 1) were examined for their anti-proliferative effects against L1210, P388D1, K562, MEG-01, KG-1, MOLT-4, A549, HepG2, MCF-7, SK-OV-3, and SW-620 cancer cell lines. They showed anti-proliferative effects with $IC_{50}$ values of 0.06, 2.16, 2.42, > 50.0, 1.66 and $8.31{\mu}M$ against L1210, while the values were 24.05, 9.44, 5.22, 0.25. 9.48 and $49.77{\mu}M$ against P388D1, respectively. The others were inactive.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.6
• /
• pp.933-940
• /
• 2013

In this study, methyl esters with different saturated fatty acids (SFA) were prepared by urea fractionation to make an oil-in-water emulsion. Emulsion characteristics (emulsion stability and oxidative stability) of the methyl ester emulsion were then studied at different percentages of methyl ester saturation (5, 28, 39, 50, and 72%, termed ${\Sigma}$SFA5, ${\Sigma}$SFA28, ${\Sigma}$SFA39, ${\Sigma}$SFA50, and ${\Sigma}$SFA72, respectively). The stability of emulsions (ES) with different SFA content was 46.0 (${\Sigma}$SFA5), 39.5 (${\Sigma}$SFA28), 32.7 (${\Sigma}$SFA39), 32.6 (${\Sigma}$SFA50), and 27.3 (${\Sigma}$SFA72). Results from Turbiscan showed that creaming or clarification, based on the backscattering intensity, was more pronounced with increases in the saturation degree of the emulsion. These results implied that the emulsions with lower saturation were more stable. During 30 days of storage, the lipid peroxide value increased for all emulsions, with the increase less pronounced with the increasing saturation of the emulsion; 1.880 (${\Sigma}$ SFA5), 1.267 (${\Sigma}$SFA28), 1.062 (${\Sigma}$SFA39), 0.342 (${\Sigma}$SFA50) and 0.153 (${\Sigma}$SFA72) mg $H_2O_2/mL$ emulsion. In addition, thiobarbituric acid reactive substances (TBARS) values were significantly lower in emulsions with high saturation (4.419 mg for ${\Sigma}$SFA50 and 4.226 mg for ${\Sigma}$SFA72) than emulsions with low saturation (6.229 mg for ${\Sigma}$SFA5, 6.801 mg for ${\Sigma}$SFA28 and 6.246 mg for ${\Sigma}$SFA39). In conclusion, the emulsions with a higher saturation degree of methyl esters showed lower emulsion stability but better oxidation stability.

• 보존과학연구
• /
• s.33
• /
• pp.45-55
• /
• 2012

A beeswax-treated paper has no air permeability but has the water repellency compared with a general Hanji. Because of these properties, the differences of the aging factors and mechanisms between the outer partition of beeswax-treated paper that is affected by the surrounding conservation environment and the inner partition of it that is not affected are bigger than general books. In this research, we analyzed and compared the aging characteristics through the accelerated aging of the beeswax-treated paper by some air and humidity conditions. The results of the physical and optical analysis after the artificial aging, it was shown that the oxygen accelerates the aging of the beeswax-treated paper and the condition with the humidity 50% RH is more stable than the condition with the humidity 0% RH. The results of the CG/MS analysis that was conducted to figure out the decomposition charateristics of the beeswax according to the air quality and the humidity, a low molecular weight compound that the number of carbon is C9-C20 including a fatty acid such as a palmitic acid was increased as the aging was progressed. However, under the same environment, a compound that the number of carbon is C21-C36 including a hydrocarbon and a aliphatic alcohol and a high molecular weight compound that the number of carbon is more than C34 including a wax ester were decreased. A rate of change according to the air quality and the humidity was similar to the beeswax-treated papers.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.247-258
• /
• 2023

This study aims to investigate the enhancement of water resistance and improvement in adhesion to the skin by combining dextrin palmitate and isopropyl titanium triisostearate coating materials with titanium dioxide. Due to the recent increase in consumers who enjoy outdoor activities, the demand for sunscreen with excellent water resistance is increasing. Prior research was conducted with O/W, Pickering, and W/O/W multiple formulations, but there was a limit to water resistance. The purpose of this study is to develop a complex inorganic powder that can improve water resistance and increase adhesion to the skin to solve this problem. First, we combined dextrin palmitate and isopropyl titanium triisostearate coating materials to form a composite with titanium dioxide. The coating of the inorganic powder was confirmed using FE-SEM and FT-IR analysis. The composite exhibited significantly higher in vitro water resistance compared to other formulations. The hydrophobicity of the coated inorganic powder was compared by measuring the contact angles. When the coated inorganic powder was applied to the W/O sunscreen formulation and the non-coated inorganic powder was applied to the W/O sunscreen formulation as a control, the SPF of the sunscreen containing the coated inorganic powder was higher. These results were the same when observed with a UV camera. Finally the adhesion of the coated inorganic powder to the skin was assessed by applying it to a foundation product. In vivo study, it was observed that the product formulated with the coated powder exhibited less smudging compared to the foundation product formulated with the non-coated powder. The developed inorganic powder in this study demonstrated excellent adhesion to the skin, providing a superior sensory experience, as well as enhanced hydrophobicity and remarkable water resistance effects. In the future, the result of this study is expected to help develop various sunscreen products to improve water resistance.