• 대한조선학회논문집
• /
• 제30권4호
• /
• pp.74-82
• /
• 1993

본고에서는 type B 독립구형 방식 LNG 탱크의 피로균열 발생 및 진전에 대한 구조안전성 평가 기법을 연구하였다. 이는 다음과 같은 3단계의 검토과정으로 구성된다. 1) 탱크에 작용하는 파랑응력의 장기분포 평가 및 피로균열 발생수명해석 과정은 이미 제1보에서 상세히 다룬 바 있으며 2) 초기 결함이 탱크판을 관통할 수 없음을 표면균열 진전해석을 통하여 증명한다. 3) LBF(Leak Before Failure) 이론을 바탕으로 관통균열의 진전해석을 수행하여 급속 취성파괴에 대한 안전성을 검증한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.703-708
• /
• 1997

In this study, the fatigue tests are performed on simply-supported R/C beams strengthened with steel plate and CFS (Carbon fiber sheet). Analysis results by Weibull distribution are compared with the test data. The unknown Weibull distribution parameters are estimated based on observations recorded in fatigue test. Safety factors for the number of cycles and the stress level are obtained. S-N-P curves are also generated from these testes and probabilities of failure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.672-675
• /
• 1995

Because of a sudden growth of the research of fatigue failure, recent machines or structures have been designed by damage tolerance design in many fields. Consequently, it is the most primary factor to clarity the specific character of fatique failure in the design of machines or structures considering reliability. A statistical analysis is required to analyze the outcome of an experiment or a life estimate by reason of that fatigue failure contains lots of random elements. Reliability analysis which has tukenn the place of the existing analyses in the consideration of the uncertainty of a material, is a very efficient way. Even reliability analysis, however, is not a perfect way to analyses the uncertainties of all the materials. This thesis would refer to a newly conceived data analysis that the coefficient of a system could cause the ambiguity of the relationship of an input and output.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.91-99
• /
• 1998

A correlation between the low-cycle fatigue life and the scuffing-failure life is demonstrated using the plastic strain in boundary lubricated sliding. Loadings proportional to hardness with three different lubricated conditions were used to evaluate the plastic strain. As the results of scuffing tests using vacuum pump oils in nitrogen gas, plastic strain shows 0.0062, and In the mineral oils and commercial engine oils in air, plastic strain show 0.0042 and 0.00092. Those are very useful to describe quantitatively the real lubricated sliding conditions, and are very effective to find the relation between the low-cycle fatigue life and the scuffing life.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1083-1088
• /
• 2005

As the industrial society develops rapidly, the weight reduction and high strength are demanded gradually. In case of the welded joint for the rolling stock which receives the repeat load, the structural failure can occur easily. However, if the shot peening technique is applied, the durability and the fatigue characteristics of the rolling stock will be improved because the hardness increases and the residual stress is induced. In this study, the fatigue characteristics of shot peened welled joints for the rolling stock was investigated. The crack initiation was examined and hardness was also evaluated. the results show that the fatigue characteristics of welded joints was improved.

• Tribology and Lubricants
• /
• 제13권2호
• /
• pp.39-45
• /
• 1997

The shot peening treatment were conducted for improving the strength of rolling contact fatigue of machine element like a gear. This paper was undertaken to analyze the influence of shot peening treatment for inner race of ball bearing on the rolling contact fatigue. Shot peening treatment were applied to the full hardened and the carbonitrided bearing. And the rolling contact fatigue life test and X-ray diffraction test were carried out. The results of this study showed that the fatigue life of ball bearing in the clean and the contaminated oil could be improved by shot peening treatment. This effect was found to be more pronounced to the full hardened bearing. These facts might be due to the generation of compressive residual stress and the strain hardening of surface layer by shot peening treatment. The failure of the shot peened bearing were presumed to initiate at surface.

• 한국산업융합학회 논문집
• /
• 제24권4_2호
• /
• pp.435-441
• /
• 2021

This research was performed to study the effect of the Ni + Mo addition on the fatigue properties in 12Cr steel. After heat treatment of 12Cr steel and 12Cr-Ni-Mo steel, tensile tests, impact tests, hardness tests, and rotary bending fatigue tests were performed, respectively. The fatigue fracture surface was observed and analyzed using SEM and EDS. The fatigue limit of 12Cr steel was 554 MPa, which was 49 MPa higher than 505 MPa of 12Cr-Ni-Mo steel. Striations, which are the shape of the typical fatigue fracture surface, were observed at the fracture surface near the starting point of fatigue fracture in the 12Cr steel and 12Cr-Ni-Mo steel. However, unlike the case of 12Cr steel, 12Cr-Ni-Mo steel also had a mixed fracture surface with the fatigue and the ductile fracture surface. When brittle non-metallic inclusions exist near the starting point of fatigue failure, the crack propagation was further promoted and the fatigue life was drastically reduced.

• 한국도로학회논문집
• /
• 제11권4호
• /
• pp.95-105
• /
• 2009

본 연구는 콘크리트 포장의 지불규정 인자 중 콘크리트 휨강도와 표면 평탄성이 콘크리트 포장 공용성에 미치는 영향에 대하여 분석하고, 이러한 인자에 대한 지불규정을 적용할 때 인자의 크기에 따른 적절한 허용범위를 결정하는 근거를 마련하기 위하여 수행되었다. 콘크리트의 휨강도에 대하여 AASHTO, 지수형, 선형 피로파손 공식 등의 공용성 모델을 이용하여 분석을 수행하였으며, 콘크리트 포장의 표면 평탄성에 대해서는 PSI, IRI, PrI 등의 평탄성 지수와 AASHTO 피로파손 공식을 사용하여 분석을 수행하였다. 연구결과, 휨강도의 허용 기준은 휨강도 손실률(손실량/휨강도)을 기준으로 하여야 하며, 휨강도 손실률이 증가할수록 설계수명이 선형으로 감소하기 때문에 이에 적절하게 공사비를 차감 지급해야 하는 것을 알 수 있었다. 표면 평탄성은 초기 평탄성이 우수할수록 평탄성지수의 손실률을 크게 허용해야 하며, 휨강도와 같이 평탄성 지수 손실률과 포장 수명 감소가 선형으로 비례하므로 공사비 차등 적용도 이에 적절하게 하여야 한다는 것을 알 수 있었다.