• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.125-131
• /
• 2021

For the vibration reliability tests, the jigs for mounting the test specimen on a vibration reliability tester are required. The dynamic stabilities of the jigs should be verified before the tests for obtaining the accurate reliability of the test specimen. This paper proposes an analytical technology for ensuring the dynamic structural stability for the test setup including the jig. The technology includes the mode analyses for checking resonance, the harmonic analyses for evaluating the dynamic structural stability of test setup including the jig, and the fatigue analyses for obtaining the durable reliability time with calculating the life cycles at the area of weakness. The cause investigation of the damaged jig during vibration reliability test of a rubber hose and the design of new revised jig are performed by using the technology. The vibration reliability test for the rubber hose with the new revised jig by analysis results is successfully conducted without any problem. Therefore the jig's design technology proposed in this paper may be useful for other items as well.

• Smart Structures and Systems
• /
• v.30 no.2
• /
• pp.183-193
• /
• 2022

Structural health monitoring and structural vibration control are multidisciplinary and frontier research directions of civil engineering. As intelligent materials that integrate sensing and actuation capabilities, shape memory alloys (SMAs) exhibit multiple excellent characteristics, such as shape memory effect, superelasticity, corrosion resistance, fatigue resistance, and high energy density. Moreover, SMAs possess excellent resistance sensing properties and large deformation ability. Superfine NiTi SMA wires have potential applications in structural health monitoring and micro-drive system. In this study, the mechanical properties and electrical resistance sensing characteristics of superfine NiTi SMA wires were experimentally investigated. The mechanical parameters such as residual strain, hysteretic energy, secant stiffness, and equivalent damping ratio were analyzed at different training strain amplitudes and numbers of loading-unloading cycles. The results demonstrate that the detwinning process shortened with increasing training amplitude, while austenitic mechanical properties were not affected. In addition, superfine SMA wires showed good strain-resistance linear correlation, and the loading rate had little effect on their mechanical properties and electrical resistance sensing characteristics. This study aims to provide an experimental basis for the application of superfine SMA wires in engineering.

• Tribology and Lubricants
• /
• v.38 no.1
• /
• pp.22-26
• /
• 2022

A 1.7-ton grade small excavator is a construction equipment that can perform various functions in limited spaces where heavy equipment cannot enter easily. Owing to the recent acceleration of urbanization, it has been used increasingly in drainage and gas pipes, as well as for road repair works in urban areas. The power train of a traveling reducer for a 1.7-ton grade small excavator utilizes a complex planetary gear system. Complex planetary gears are vital to the power train of a traveling reducer as it mitigates the fatigue strength problem. In the present study, the specifications of a complex planetary gear train are calculated; furthermore, the gear bending and compressive stresses of the complex planetary gears are analyzed to achieve an optimal design of the latter in terms of cost and reliability. In this study, the actual gear bending and compressive stresses of a planetary gear system are analyzed using a self-developed gear design program based on the Lewes and Hertz equation. Subsequently, the calculated specifications of the complex planetary gears are verified by evaluating the results with the data of allowable bending and compressive stress based on curves of stress vs. number of cycles of the gears.

• Journal of Hospice and Palliative Care
• /
• v.26 no.4
• /
• pp.171-184
• /
• 2023

Purpose: The study explored the meaning of experiences within a family art therapy process among terminal cancer patients and their families. Methods: Ten participants, including four terminal cancer patients currently admitted to the hospice ward at an inpatient hospice facility in S City and four caregiving family members, engaged in four cycles of family art therapy sessions. The sessions were conducted weekly or bi-weekly, and each lasted approximately 50 minutes. Results: Nine cross-case themes emerged: "feeling unfamiliar and intimidated by the idea of expressing my thoughts through art," "trying to accept the present and positively overcome sadness," "expressing hope through emotional bonds during the process of parting," "conveying and preserving personal and family beliefs," "feeling upset about family imbalances caused by deteriorating health," "valuing togetherness and striving for stability amidst the current challenges," "art as a medium of empowerment for patients and facilitator of family conversations, even amidst difficulties," "sharing a range of emotions-not just joy, but concerns and sorrow-through art," and "gratitude for art' s role in improving family communication and connection through artwork. Conclusion: The findings of this study lead to several conclusions. First, patients and their families faced psychological challenges when confronted with impending death, yet they strove to remain optimistic by seeking meaning in their struggles. Second, families practiced open and expressive communication, sharing a spectrum of complex emotions with one another. Third, even as the patient's condition worsened, resulting in family fatigue, their support and cohesion strengthened.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.1 no.1
• /
• pp.77-97
• /
• 1994

The circadian system represents a temporal order which is mediated by the mutual coupling of oscillators and by the synchronizing effects of zeitgebers. It is known that well-being of man depends partly on the maintenance of this order, and that repeated or long lasting disturbances to it such as shift work will Cause harmful effects. This study was a quasi-experimental study to test the effect of shift directions for the clinical nurses on the circadian rhythm. Fourteen nurses working at the general units of Y hospital were selected according to the established criteria. Fourteen subjects were assigned to a weekly shift but the directions of shift work were phase delay first and then phase advance or vice versa. Oral temperature, total sleeping time, frequency of sleep-wake cycle, fatigue, mental performance, and physical symptom were measured during these days except holidays. The data collection period was from April 26, 1993 to July 3, 1993. MANOVA and Wilcoxon signed rank test were used for statistical analysis. The results are summarized as follows. 1. Having worked on evening and night shifts in either phase delay or phase advance schedules, temperature rhythms of shift workers were gradually adapted to the new sleep-wake cycles. A complete adaptation to work on the night shift was achieved the sixth day of the night shift in the phase delay schedule compared to the partial adaptation to the work on the night shift in the phase advance schedule. Accordingly, by putting evening shift between day and night shifts, it will be possible for circadian rhythm to adapt easily to the night shift. 2. There were differences in the total sleeping time, frequency of steep-wake cycle, fatigue, and physical symptom except for mental performance between night shift and day, evening shift. This indicates further that shift workers working on the night shift have a hard time adapting to the shift work compared to the other shifts. 3. Evaluating all the acrophases of temperature rhythm either in phase delay or phase ad-vance schedules, it was shown that night to evening shift in the phase ad-vance schedule revealed the smallest phase move. Also phase advance schedule showed poorer adaptation to shift work than phase delay schedule in connection with total sleeping time, frequency of sleep-wake cycle, fatigue, mental performance, and physical symptom. It is suggested, taken together, these findings reflect that phase delay schedule facilitated the degree of adjustment to the shift work compared to the phase advance schedule.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.4
• /
• pp.69-76
• /
• 2014

In this study, we developed an ultra-thin flexible printed circuit board(FPCB) using the sputtered flexible copper clad laminate. In order to enhance the adhesion between copper and polyimide substrate, a NiMoNb addition layer was applied. The mechanical durability and flexibility of the ultra-thin FPCB were characterized by stretching, twisting, bending fatigue test, and peel test. The stretching test reveals that the ultra-thin FPCB can be stretched up to 7% without failure. The twisting test shows that the ultra-thin FPCB can withstand an angle of up to $120^{\circ}$. In addition, the bending fatigue test shows that the FPCB can withstand 10,000 bending cycles. Numerical analysis of the stress and strain during stretching indicates the strain and the maximum von Mises stress of the ultra-thin FPCB are comparable to those of the conventional FPCB. Even though the ultra-thin FPCB shows slightly lower durability than the conventional FPCB, the ultra-thin FPCB has enough durability and robustness to apply in industry.

• Journal of the Korea Concrete Institute
• /
• v.25 no.5
• /
• pp.517-528
• /
• 2013

The modular technology has been already applied in automotive industry, plant and shipbuilding industry. Recently, the modular technology was applied in bridge construction. The modular bridge is different from the existing precast bridges in terms of standardized design that the detailed design of members is omitted by using the standard modules; the design of the modular bridge is completed by only assembling the standard modules without design in member level. The girder-type precast modular bridge has been developed as a simply supported bridge. The girder-type precast modular bridge could be applied to the multi-span bridges through the continuity method. The continuity of the girder-type precast modular bridge is achieved by using the link slab which is easy to construction and appropriate to the rapid construction. The link slabs have been used as the type of reinforced concrete structure in US from the 1950's. In 2000's, the link slab using the engineered cementitious concrete (ECC link slab) has been developed. In this study, the RC type link slab which is more reproducible and economic relative to the ECC link slab was used for the continuity of the girder-type precast modular bridges, and the construction detail of RC type link slab was modified. In addition, the modified iterative design method of RC type link slab was proposed in this study. To verify the proposed design method, the flexural tests were conducted using the RC type link slab specimens. Also, the fatigue test using the mock-up specimen was conducted with cyclic loading condition up to two million cycles.

• Journal of the Korea Concrete Institute
• /
• v.22 no.5
• /
• pp.609-616
• /
• 2010

FRP-concrete composite deck, an innovative system, is composed of concrete in the top and FRP panel in the bottom. Bottom FRP panel can reduce self weight and improve workability. This system requires strong connection between FRP and concrete. Therefore coarse sand coating was previously applied on FRP to improve the bonding. In this study, concrete wedge method is newly introduced to enhance both vertical bond and fatigue performance. Three FRP-concrete composite deck specimens with the concrete wedges were manufactured, and static and fatigue tests were carried out. The results showed that the new FRP-concrete composite deck satisfied deflection and crack width limits set by the design codes. And the fatigue test showed that the composite deck was capable of two million load cycles under 50% of its static strength. Based on the results, it can be concluded that that this new system has outstanding mechanical and durability performance, and therefore, satisfactorily be used in designing FRP-concrete composite deck.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.2
• /
• pp.463-467
• /
• 2012

Purpose: To assess the safety and efficacy of a gemcitabine plus docetaxel regimen as a second line therapy for patients with advanced soft tissue sarcoma (STS) resistant to doxorubicin and ifosfamide-based therapy. Patients and Methods: Medical records of 64 patients with advanced STS who received gemcitabine plus docetaxel regimen as a second line treatment between May 2006 and June 2011 were examined. All patients had been previously treated with doxorubicin plus ifosfamide-based regimen at first line setting. Patients received gemcitabine 900 $mg/m^2$ on days one and eight intravenously over 90 minutes, followed by docetaxel 75 $mg/m^2$ on day eight intravenously over one hour. Cycles were repeated every 3 weeks. Results: The male-to-female ratio was 37/27 and the median age was 44 years (range; 19-67 years). Objective responses were observed in 13 (20.3 %) patients (2 CR, 11 PR) and stable disease in 21 (32.8 %). Total clinical benefit (CR+PR+SD) was observed in 34 (53.1 %). Median overall survival (OS) was 18 months (95% confidence interval (CI):12.1-23.9) and Median time to progression (TTP) was 4.8 months (95% CI: 3.6-6). A total of 243 cycles of chemotherapy were administered. The median number of cycle was 3 (range;1-11). The most common grade 3-4 hematologic toxicity was neutropenia (35.9 %). The most common nonhematologic toxicities consisted of nausea/vomiting (37.5 %), mucositis (32.8 %), peripheral neuropathy (29.7%), and fatigue (26 %). There was no toxicity-related death. Conclusion: The combination of gemcitabine plus docetaxel is an active and tolerable regimen as a second line therapy for patients with advanced soft tissue sarcoma who have failed doxorubicin and ifosfamide-based therapy.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.9
• /
• pp.4037-4040
• /
• 2015

Objective: To explore the clinical efficacy and toxic and side effects of recombinant human endostatin (rhendostatin/endostar) combined with chemotherapy in the treatment of advanced gastric cancer. Materials and Methods: A total of 70 patients with advanced gastrointestinal adenocarcioma confirmed by histopathology and/or cytological examination were divided into group A (37 patients) and group B (33 patients). Patients in group A were given intravenous drip of 15 mg endostar added into 500 mL normal saline, once every other day until the cessation of chemotherapy or patients' maximal tolerance to chemotherapy. Patients in group B received chemotherapy alone. Two groups selected the same chemotherapy regimens. FOLFIRI scheme: 90-min intravenous drip of $180mg/m^2$ irinotecan, intravenous drip of $200mg/m^2$ calcium folinate (CF) and $400mg/m^2$ 5-fluorouracil (5-Fu) on d1, and continuous intravenous pumping of 2 $400mg/m^2$ 5-Fu for 46 h. FOLFOX4 scheme: intravenous injection of $85mg/m^2$ oxaliplatin (L-OHP), $200mg/m^2$ calcium folinate (CF) and $400mg/m^2$ 5-FU on d1 for 2 h, and then continuous intravenous pumping of 2 $400mg/m^2$ 5-Fu for 46 h. XELOX scheme: oral administration of 1 $500mg/m^2$ xeloda (or tegafur 50~60 mg) in twice during d1~14 and intravenous drip of $135mg/m^2$ L-OHP on d1 for 2 h. The modified FOLFOX scheme: intravenous injection of $135mg/m^2$ L-OHP on d1 for 2 h, $200mg/m^2$ CF and 1.0 g tegafur during d1~5. Whereas, control Group B received chemotherapy regimens which were same as Group A, but no addition of endostar. Before chemotherapy, patients were given intravenous injection of 8 mg ondansetron, intramuscular injection of 10 mg metoclopramide and 20 mg diphenhydramine for prevention of vomiting, protection of liver and stomach as well as symptomatic supportive treatment. One cycle was 21 d, 4~6 cycles in total. The efficacy was evaluated every 2 cycles. Results: 32 patients in Group A could be evaluated, and the response rate (RR) and disease control rate (DCR) were 59.38% and 78.13%, respectively. 31 patients in Groups could be evaluated, and the RR and DCR were 32.26% and 54.84%, respectively. The differences between 2 groups were significant. The toxic effects include myelosuppression, gastrointestinal reaction, fatigue, cardiotoxicity and peripheral neurotoxicity. Conclusions: Preliminary observations show that endostar (once every other day) combined with chemotherapy is effective in the treatment of advanced gastrointestinal cancer, with low toxic effects, good tolerance, deserving further study.