Browse > Article
http://dx.doi.org/10.12989/sss.2022.30.2.183

Thermomechanical and electrical resistance characteristics of superfine NiTi shape memory alloy wires  

Qian, Hui (School of Civil Engineering, Zhengzhou University)
Yang, Boheng (School of Civil Engineering, Zhengzhou University)
Ren, Yonglin (School of Civil Engineering, Zhengzhou University)
Wang, Rende (Henan Haoze Electronics Co., Ltd.)
Publication Information
Smart Structures and Systems / v.30, no.2, 2022 , pp. 183-193 More about this Journal
Abstract
Structural health monitoring and structural vibration control are multidisciplinary and frontier research directions of civil engineering. As intelligent materials that integrate sensing and actuation capabilities, shape memory alloys (SMAs) exhibit multiple excellent characteristics, such as shape memory effect, superelasticity, corrosion resistance, fatigue resistance, and high energy density. Moreover, SMAs possess excellent resistance sensing properties and large deformation ability. Superfine NiTi SMA wires have potential applications in structural health monitoring and micro-drive system. In this study, the mechanical properties and electrical resistance sensing characteristics of superfine NiTi SMA wires were experimentally investigated. The mechanical parameters such as residual strain, hysteretic energy, secant stiffness, and equivalent damping ratio were analyzed at different training strain amplitudes and numbers of loading-unloading cycles. The results demonstrate that the detwinning process shortened with increasing training amplitude, while austenitic mechanical properties were not affected. In addition, superfine SMA wires showed good strain-resistance linear correlation, and the loading rate had little effect on their mechanical properties and electrical resistance sensing characteristics. This study aims to provide an experimental basis for the application of superfine SMA wires in engineering.
Keywords
ER sensing; mechanical properties; shape memory effect; superelasticity; superfine SMA wire;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 Novak, V., Sittner, P., Dayananda, G.N., Braz-Fernandes, F.M. and Mahesh, K.K. (2008), "Electric resistance variation of NiTi shape memory alloy wires in thermomechanical tests: Experiments and simulation", Mater. Sci. Eng.: A, 481, 127-133. https://doi.org/10.1016/j.msea.2007.02.162   DOI
2 Qian, H., Li, H.N., Song, G.B. and Chen, H. (2011), "Dynamical behavior and constitutive model of superelasticity niti shape memory alloy wire: experiment and theory", J. Solid Mech., 32(04), 353-359. [In Chinese]
3 Sreekanth, M., Mathew, A.T. and Vijayakumar, R. (2018), "A novel model-based approach for resistance estimation using rise time and sensorless position control of sub-millimetre shape memory alloy helical spring actuator", J. Intell. Mater. Syst. Struct., 29(6), 1050-1064. https://doi.org/10.1177/1045389X17730911   DOI
4 Suhail, R., Chen, J.F., Amato, G. and McCrum, D. (2020a), "Mechanical behaviour of NiTiNb shape memory alloy wires-strain localisation and effect of strain rate", Mech. Mater., 144, 103346. https://doi.org/10.1016/j.mechmat.2020.103346   DOI
5 Lee, H.T., Kim, M.S., Lee, G.Y., Kim, C.S. and Ahn, S.H. (2018), "Shape memory alloy (sma)-based microscale actuators with 60% deformation rate and 1.6 kHz actuation speed", Small, 14(23), 1801023. https://doi.org/10.1002/smll.201801023   DOI
6 Casciati, S. and Marzi, A. (2010), "Experimental studies on the fatigue life of shape memory alloy bars", Smart Struct. Syst., Int. J., 6(1), 73-85. https://doi.org/10.12989/sss.2010.6.1.073   DOI
7 Airoldi, G., Pozzi, M. and Riva, G. (1996), "The electrical resistance properties of shape memory alloys", MRS Online Proceedings Library. https://doi.org/10.1557/PROC-459-459   DOI
8 Churchill, C.B., Shaw, J.A. and Iadicola, M.A. (2010), Tips and tricks for characterizing shape memory alloy wire: Part 4-thermo-mechanical coupling.
9 Cui, D., Song, G. and Li, H. (2010), "Modeling of the electrical resistance of shape memory alloy wires", Smart Mater. Struct., 55019. https://doi.org/10.1088/0964-1726/19/5/055019   DOI
10 DesRoches, R., McCormick, J. and Delemont, M. (2004), "Cyclic properties of superelastic shape memory alloy wires and bars", J. Struct. Eng., 130(1), 38-46.   DOI
11 Shi, Z., Wang, T. and Da, L. (2014), "Performance analyses of antagonistic shape memory alloy actuators based on recovered strain", Smart Struct. Syst., Int. J., 14(5), 765-784. https://doi.org/10.12989/sss.2014.14.5.765   DOI
12 Ikuta, K., Tsukamoto, M. and Hirose, S. (1991), "Mathematical model and experimental verification of shape memory alloy for designing micro actuator", IEEE Micro Electro Mech. Syst., 103-108. https://doi.org/10.1109/MEMSYS.1991.114778   DOI
13 Dolce, M. and Cardone, D. (2001a), "Mechanical behaviour of shape memory alloys for seismic applications 1. Martensite and austenite NiTi bars subjected to torsion", Int. J. Mech. Sci., 43(11), 2631-2656. https://doi.org/10.1016/S0020-7403(01)00049-2   DOI
14 Dolce, M. and Cardone, D. (2001b), "Mechanical behaviour of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension", Int. J. Mech. Sci., 43(11), 2657-2677. https://doi.org/10.1016/S0020-7403(01)00050-9   DOI
15 Dhanalakshmi, K., Umapathy, M., Ezhilarasi, D. and Bandyopadhyay, B. (2011), "Design and implementation of fast output sampling feedback control for shape memory alloy actuated structures", Smart Struct. Syst., Int. J., 8(4), 367-384. https://doi.org/10.12989/sss.2011.8.4.367   DOI
16 Lee, S.H. and Kim, S.W. (2020), "Self-sensing-based deflection control of carbon fibre-reinforced polymer (CFRP)-based shape memory alloy hybrid composite beams", Compos. Struct., 251, 112544. https://doi.org/10.1016/j.compstruct.2020.112544   DOI
17 Dutta, S.M. and Ghorbel, F.H. (2005), "Differential hysteresis modeling of a shape memory alloy wire actuator", IEEE/ASME Transact. Mechatron., 10(2), 189-197. https://doi.org/10.1109/TMECH.2005.844709   DOI
18 Ikuta, K., Tsukamoto, M. and Hirose, S. (1988), "Shape memory alloy servo actuator system with electric resistance feedback and application for active endoscope", Proceedings of 1988 IEEE International Conference on Robotics and Automation, Philadelphia, PA, USA, April, pp. 427-430.
19 Jain, A.K., Sharma, A.K., Khandekar, S. and Bhattacharya, B. (2020), "Shape Memory Alloy-Based Sensor for Two-Phase Flow Detection", IEEE Sens. J., 20(23), 14209-14217. https://doi.org/10.1109/JSEN.2020.3008191   DOI
20 Janke, L., Czaderski, C., Motavalli, M. and Ruth, J. (2005), "Applications of shape memory alloys in civil engineering structures - Overview, limits and new ideas", Mater. Struct., 38(5), 578-592. https://doi.org/10.1617/14323   DOI
21 Lee, H.T., Seichepine, F. and Yang, G.Z. (2020), "Microtentacle actuators based on shape memory alloy smart soft composite", Adv. Funct. Mater., 30(34), 2002510. https://doi.org/10.1002/adfm.202002510   DOI
22 Lester, B.T., Baxevanis, T., Chemisky, Y. and Lagoudas, D.C. (2015), "Review and perspectives: shape memory alloy composite systems", Acta Mech., 226, 3907-3960. https://doi.org/10.1007/s00707-015-1433-0   DOI
23 Fang, C., Zheng, Y., Chen, J., Yam, M.C. and Wang, W. (2019), "Superelastic NiTi SMA cables: Thermal-mechanical behavior, hysteretic modelling and seismic application", Eng. Struct., 183, 533-549. https://doi.org/10.1016/j.engstruct.2019.01.049   DOI
24 Nahm, S.H., Kim, Y.J., Kim, J.M. and Yoon, D.J. (2005), "A study on the application of Ni-Ti shape memory alloy as a sensor", In: Materials Science Forum, Vol. 475, pp. 21043-2046. https://doi.org/10.4028/www.scientific.net/MSF.475-479.2043   DOI
25 Sherif, M.M. and Ozbulut, O.E. (2020), "Thermomechanical and electrical response of a superelastic NiTi shape memory alloy cable", J. Intell. Mater. Syst. Struct., 31(19), 2229-2242. https://doi.org/10.1177/1045389X20943952   DOI
26 Suhail, R., Amato, G. and McCrum, D. (2021), "Thermo-mechanical characterisation of NiTi-based shape memory alloy wires for civil engineering applications", J. Intell. Mater. Syst. Struct., 32(20), 2420-2436.   DOI
27 Zadafiya, K., Kumari, S., Chatterjee, S. and Abhishek, K. (2021), "Recent trends in non-traditional machining of shape memory alloys (SMAs): A review", CIRP J. Manuf. Sci. Technol., 32, 217-227. https://doi.org/10.1016/j.cirpj.2021.01.003   DOI
28 Zhang, J.J., Yin, Y.H. and Zhu, J.Y. (2013), "Electrical resistivity-based study of self-sensing properties for shape memory alloy-actuated artificial muscle", Sensors, 13(10), 12958-12974. https://doi.org/10.3390/s131012958   DOI
29 Suhail, R., Amato, G. and McCrum, D. (2020b), "Heat-activated prestressing of NiTiNb shape memory alloy wires", Eng. Struct., 206, 110128. https://doi.org/10.1016/j.engstruct.2019.110128   DOI
30 Mohan, S. and Banerjee, A. (2021), "Modelling of minor hysteresis loop of shape memory alloy wire actuator and its application in self-sensing", Smart Mater. Struct., 30(5), 055011. https://doi.org/10.1088/1361-665X/abeefa   DOI
31 Song, G., Ma, N. and Lee, H.J. (2007), "Position estimation and control of SMA actuators based on electrical resistance measurement", Smart Struct. Syst., Int. J., 3(2), 189-200. https://doi.org/10.12989/sss.2007.3.2.189   DOI
32 Nakshatharan, S. and Dhanalakshmi, K. (2014), "Differential resistance feedback control of a self-sensing shape memory alloy actuated system", ISA Trans., 53(2), 289-297. https://doi.org/10.1016/j.isatra.2013.11.002   DOI
33 Qian, H., Li, J.B., Li, H.N. and Chen, H. (2013), "Mechanical behavior tests of NiTi wires with different diameters for structural vibration control", J. Vib. Shock, 32(24), 89-95. [In Chinese]
34 Song, G., Mo, Y.L., Otero, K. and Gu, H. (2006), "Health monitoring and rehabilitation of a concrete structure using intelligent materials", Smart Mater. Struct., 15(2), 309-314. https://doi.org/10.1088/0964-1726/15/2/010   DOI