• 대한안전경영과학회지
• /
• 제15권2호
• /
• pp.71-77
• /
• 2013

The accident which is caused by the press work remains a Permanent obstacle in worker's hand or arms, the disaster ratio is high and the fatal case is many. Mainly Like this accident occurs because the hand to enter with inside of the press die, therefore, basic countermeasure is the safety press. In order to prevent access to mechanical moving part by the hand or any part of the body, it is important to making a safety die design Structurally. It presents the design of the safety press die with suitable structure in the Product's attribute which it had shown in samples, There is a possibility of being difficult because the attribute of safety die design that had present all the productions from research does not agree each other. but because the representative process which is used most at sample had designed, If you were imitates with safety die design base which is presented from this research, It comes to be thought to be the part which can are used at the various sides.

• 한국측량학회지
• /
• 제19권1호
• /
• pp.55-66
• /
• 2001

현대도시는 여러 가지 원인으로 인하여 각종 재해가 발생하고 있다. 또한 재해의 발생 빈도가 증가하고 대형화되고 있는 시점에서 이들을 효과적으로 대처하기 위한 재해관리시스템이 필요하게 되었다. 이를 위해 본 연구에서는 급격한 차량의 증가로 인해 도시생활에서 가장 큰 재해로 지적되고 있는 교통사고와 사고발생 시 대형재해를 일으키는 가스재해 및 유지 보수의 중요성이 커지고 있는 교량 재해를 중심으로 데이터베이스를 구축하였다. 이에 본 연구는 실시간 정보의 제공을 가능케 하는 무선 인터넷 GIS를 이용하여 재해발생 시 현장에서 재해관리 데이터베이스에 접근하고, 신속하게 현장정보를 확인하여, 재해상황에 효과적으로 대처하며, 즉시 재해정보를 수정, 갱신할 수 있는 재해관리시스템을 개발하였다.

• KIEAE Journal
• /
• 제7권6호
• /
• pp.99-106
• /
• 2007

Tower crane is a large construction equipment which is extremely tall for its section when it is erected, with its high slenderness ratio, and it has a heavy load by itself due to large lifting stuff to handle. In line with the construction projects in these days which increasingly tend to become higher, larger and complex, the stuff and height subject to lifting are also getting larger and higher, which has also increased the risk of disastrous accidents. A stable foundation design thus to deal with the increasing self load becomes more important. When a typhoon Maemi swept the nation in 2003, as many as 43 tower cranes fell down or collapsed, causing a severe damage to the people and the properties. Considering such fatal damages, a technical evaluation of the stability to prevent the safety accident with the tower crane must be very crucial. Tower cranes operation in domestic construction sites, in fact, have been simply dependent on personal experience and intuition of the engineers. Particularly when it comes to the foundation design, it mostly depends on manufacturer's recommendation. The study hence was intended to develop the fundamental measures for granting the objective stability, instead of following the individual's experience only. The simulation model recommended in the study is expected to make a good commitment to achieving an effective lifting work as well as preventing the safety accident.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.164-173
• /
• 2005

In this paper, the systematic problems of safety management in domestic construction industry are presented by the investigation and analysis of construction fatal injuries. In particular, it is discussed that the current construction safety management system by contractors leading is ineffective to prevent the serious accidents caused by inappropriate planning and design and to circulate the safety management cycle without interruption. A couple of ways for improving domestic construction safety management system are suggested in broad perspective. This is done by the analysis of construction safety management system of four advanced industrial countries such as the United States, the United Kingdom, Germany, and Japan and the study of a best practice. Total safety management system by owners leading is recommended to prevent construction accident effectively because this system makes all the parties join to the management system and distribute the responsibilities clearly to each party. This will drop the accident occurrence rate by dragging all the parties' cooperations and activating the total safety management system in an early stage.

• Safety and Health at Work
• /
• 제8권4호
• /
• pp.410-412
• /
• 2017

Post-traumatic stress disorder (PTSD) is a serious problem not only among workers who experience industrial accidents but also among workers who witness such accidents. Early intervention is needed to prevent prolonged psychological problems. There has been no study conducted regarding the psychological problems of and interventions for bystander workers in Korea. This study introduces the experience of intervention on psychological problems at the Busan Workers' Health Center workers who witnessed their colleagues' death. An investigation and an intervention were conducted according to the Korean Occupational Safety and Health Agency (KOSHA) Guide. In total, 21 individuals including indirect observers showed statistical differences on scores of the Impact Event Scale Revised and the Patient Health Questionnaire 9 after the intervention. Future interventions and research involving a larger sample size over a longer period are needed. The KOSHA Guide could be a useful tool for urgent psychological intervention in the event of major workplace disasters.

• Safety and Health at Work
• /
• 제10권2호
• /
• pp.151-165
• /
• 2019

Background: Despite improvements in safety performance, the number and severity of mining-related injuries remain high and unacceptable, indicating that further reduction can be achieved. This study examines occupational accident statistics of the Ghanaian mining industry and identifies priority areas, warranting intervention measures and further investigations. Methods: A total of 202 fatal and nonfatal injury reports over a 10-year period were obtained from five mines and the Inspectorate Division of the Minerals Commission of Ghana, and they were analyzed. Results: Results of the analyses show that the involvement of mining equipment, the task being performed, the injury type, and the mechanism of injury remain as priorities. For instance, mining equipment was associated with 85% of all injuries and 90% of all fatalities, with mobile equipment, component/part, and hand tools being the leading equipment types. In addition, mechanics/repairmen, truck operators, and laborers were the most affected ones, and the most dangerous activities included maintenance, operating mobile equipment, and clean up/clearing. Conclusion: Results of this analysis will enable authorities of mines to develop targeted interventions to improve their safety performance. To improve the safety of the mines, further research and prevention efforts are recommended.

• Journal of Trauma and Injury
• /
• 제32권3호
• /
• pp.172-175
• /
• 2019

Although thoracic endovascular aortic repair (TEVAR) has grown to become the standard of care to treat blunt thoracic aortic injury (BTAI), the long-term effects of TEVAR are still unclear. We here present a 72-year-old man with BTAI due to a traffic accident. He successfully underwent TEVAR and was transferred to another rehabilitation hospital 2 months after the accident. However, 1 month later, he underwent gastroscopy with fever and hematemesis and was diagnosed with aorto-esophageal fistula (AEF). After being re-transferred to Niigata University Medical and Dental Hospital, we tried to convince him to undergo surgical treatment, but he strongly refused. He received palliative care and died due to rupture of the aortic pseudoaneurysm 3 days after the hospital transfer. Fatal complications like AEF may occur after TEVAR, so clinicians need to carefully follow patients who underwent TEVAR.

• 한국전자통신학회논문지
• /
• 제19권1호
• /
• pp.233-240
• /
• 2024

본 연구에서는 5G 네트워크용 UAV(: Unmanned Aerial Vehicle)를 사용한 산업단지 내의 현장 상황을 실시간 감시하는 시스템에 대해 소개한다. UAV에 장착된 센서(화재, 유해가스 검출, 산업 재해형 인체 사고 감지)에서 모니터링 이벤트가 발생하면 센서의 주요 정보들이 UAS(: Unmanned Aerial System)애플리케이션 서버로 전달한다. 이러한 정보 전달 처리결과로, 산업단지공단의 관리자나 운영자는 사고 위험 상황별 트리거 처리를 통한 산업단지공단 내의 현장에서 인명사고와 화재, 그리고 유해 가스검출에 대한 법적인 근거 자료를 확보할 수 있게 되었다.

• 대한안전경영과학회지
• /
• 제15권4호
• /
• pp.179-184
• /
• 2013

An accident from machine work is often fatal to the worker. This accident is mostly preventable through perfect process jig. In case of this machine work, however, the disaster frequently occurred because of the design which is not considered the beginning of product design, post-process and mass process of production. As for sand casting method, this has the merits of the production; the product is easily produced by manual labor. On the other hand, this method has the demerits of a bigger dimensional error contrary to other mass process of production. When the sand casting product is in machine work, there are various problems such as unsafe fix and excessive cutting, product desorption and rapid life depreciation of equipment and tools. Considering the characteristics of sand casting method, it is accepted as difficulty to improve the problems. In this study, it suggests shell mold method for mold instead of the machine work after the sand casting of the circle shape container product. And the surface accomplishes the following average of surface roughness Ra$9.94{\mu}m$ of machine work with the casting of flask mold by shell mold method. In accordance with the simplification of processing process and reducing the average thickness variation by mass production of product with detailed appearance, it has a good influence on safety accident prevention caused by production and damaged product. It is confirmed that making higher degree of size precision of all machine work product is possible to increase the safety and productivity, reduce the processing process and improve environment.

• 대한교통학회지
• /
• 제5권2호
• /
• pp.55-72
• /
• 1987

The work analyzes the existing situation and defines special problems concerning traffic accidents in the two countries. The report is divided into three parts: 1) Using the global approach of SMEED, the data were evaluated using multiple regression analysis, and homogeneous groups of countries were defined by cluster analysis. In the global approach, the linear model is better than SMEED's non-linear model in explaining the number of fatalities. Among the different groups of countries, the linear approach was found to be better suited for industrialized countries and the non-linear approach better for the developing countries. T도 comparison of traffic fatality data for the Federal Republic the developing countries. The comparison of traffic fatality data for the Federal Republic of Germany and the Republic of Korea showed different regression equations during the same time period. 2) The BOX/JENKINS time series analysis on a monthly basis points out clearly similar seasonal patterns for the two countries over the years studied. The decrease in traffic accidents following the intensification of the safety belt requirement was proved in the ARIMA model. It amounts to 7 to 8 percent fewer personal injury accidents and fatal accidents. The identified increase in safety in the Federal Republic of Germany since the 1970s is mainly due to the reduction of accident severity in residential areas. 3) Speeds and headways on motorways in th3e two countries were also compared. The measurements point out that German road users drive faster, take more risks, and accept shorter time gaps than Korean road users. However, the accident statistics show accident rates for Korea that are several times higher than those in the Federal Republic of Germany.