DOI QR코드

DOI QR Code

A Study on safety die model through samples of the disaster analysis which gets jammed in

프레스 끼임 재해 사례분석을 통한 안전금형 모델 연구

  • Lee, Chun-Kyu (Div. of Mechanical & Automotive Engineering, Kongju National University) ;
  • Nam, Seung-Done (Department of Tool & Mold Engineering, yuhan University) ;
  • Kim, Young-Choon (Div. of Mechanical & Automotive Engineering, Kongju National University)
  • Received : 2013.04.15
  • Accepted : 2013.06.11
  • Published : 2013.06.30

Abstract

The accident which is caused by the press work remains a Permanent obstacle in worker's hand or arms, the disaster ratio is high and the fatal case is many. Mainly Like this accident occurs because the hand to enter with inside of the press die, therefore, basic countermeasure is the safety press. In order to prevent access to mechanical moving part by the hand or any part of the body, it is important to making a safety die design Structurally. It presents the design of the safety press die with suitable structure in the Product's attribute which it had shown in samples, There is a possibility of being difficult because the attribute of safety die design that had present all the productions from research does not agree each other. but because the representative process which is used most at sample had designed, If you were imitates with safety die design base which is presented from this research, It comes to be thought to be the part which can are used at the various sides.

Keywords

References

  1. Industrial Accidents Statistics, 2008
  2. Lee, Choong-Ryeol, "A study on automated delivery device material of the press work", Occupational safety and health Research Institute, 1991
  3. Lee, Choong-Ryeol, "Study of simple automation of transport equipment press operation material handling, and supply", Occupational safety and health Research Institute, 1992
  4. Yun-sang geon, "Study of automated transport device press operation material handling, and supply", Occupational safety and health Research Institute, 1992
  5. Three of the shin-uncheol, "Improvement development and Research Press dangerous machinery, equipment and structure", 2009
  6. Eleven of the lee-geunoh, "Disaster prevention strategies and research use survey of the press",2009
  7. Jeong-jaesu, "Studies on the safety management model and prevention of occupational accidents Press", Inha University Graduate School, 2002
  8. BMA(독.일.연.방.노.동.사.회.성.), Arbeitssichererheitsgesetz, 1997.
  9. OSHA, Industrial Safety and Health Act, Dec,29, 1970.
  10. OSHA, OSHA Facts, 2002
  11. Hammer, W. Occupational Safety Management and Engineering. Prentice-Hall Inc, Englewood Cliffs, New Jersey, 1976.