• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.10
• /
• pp.48-53
• /
• 2019

A water jet propeller is a key component that generates propulsion during the start of a naval vessel. When failure or breakage occurs, the vessel cannot operate. Recently, a flow analysis and structural analysis were conducted to understand the cause of damage to a bolt on a water jet. In particular, the stress and strain acting on the fastening bolt (impeller shaft and tail shaft) were examined to determine the extent of misalignment between the impeller shaft and the tail shaft of the water jet propeller. The study determined that stress and strain were concentrated on the impeller shaft and the tail shaft bolt. The alignment of the propeller impeller shaft and the tail shaft increased significantly in response to the tail shaft bolt. Failure of the tail shaft bolt fastening can lead to misalignment between the impeller shaft and the tail shaft.

• Elastomers and Composites
• /
• v.53 no.4
• /
• pp.220-225
• /
• 2018

Resilient pads play a major role in reducing the impact of loads on a rail in a rail-fastening system, which is essentially used for a concrete track. Although a compression set test is commonly used to measure the durability of a resilient pad, the static spring constant is often observed to be different from the fatigue test. In this study, a modified compression set test method was proposed to monitor the variations in the compression set and static spring constant of a resilient pad with respect to temperature and time. In addition, the life of the resilient pad was predicted by performing an acceleration test based on the Arrhenius equation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.298-301
• /
• 1990

This paper presents technologies to improve the control of an impact wrench. Impact wrench is a tool which is held by the electro-mechanical manipulator and used to fasten and loosen the bolts for remote maintenance of equipment in hostile environment. Vision system was developed to measure the distance and improve the positioning of the impact wrench. The vision system used two laser beams with a CCTV camera. Also, a torque adjusting method was developed to limit the fastening torque.

• Journal of Information Technology Services
• /
• v.22 no.6
• /
• pp.87-102
• /
• 2023

Existing child car seats do not have a monitoring means for the driver or guardian to effectively recognize the status of whether the seat belt of car seat is fastened and whether the ISOFIX of the car seat is fastened to the inside device of the vehicle. In this paper, we propose a smart car seat system which can monitor in real time, whether the seat belt of a child seated in the car seat is fastened and whether the ISOFIX of the car seat is fastened. The proposed system has been developed with a prototype, in which a Hall sensor, magnet, Bluetooth, and display device are used to detect whether these are fastened and to display the detection results. The prototype system provides the detection results as texts and alarm signal to the display for driver or guardian' smartphone in the car in motion. With functional tests of the prototype system, it was confirmed that the detection functions are properly operated, and the detection results were transmitted to the display device and smartphone via Bluetooth within 0.5 seconds. It is expected that the development system can effectively prevent safety accidents of child car seats.

• Korean Journal of Human Ecology
• /
• v.5 no.1
• /
• pp.55-64
• /
• 1996

The aim of this study is to get the basic data to design the clothing for the female teachers. In this study, we survey the practice of the wear in the spring and the fall of the 422 female teachers in primary, middle and high school, and their wearing sensation according to clothing construction factors. The results are as follows: first, the female teachers frequently wear blouse and skirt, jacket and blouse, jacket and T-shirts, cardigan and T-shirts in upper wear. Second, most female teachers had troubles in their clothing at work. They had serious troubles in writing on the blackboard, due to the improper form and. length of the sleeves, and the inconvenience of their skirt is due to the improper length, while they go up the strains. Third, the comfortable factors of the female teachers' blouse are as follows; round neck line, soutien and peter pan collar, sleeve attatched bodice with a little loose armhole, $10{\sim}20cm$ under from waist in length, front slit, and fastening bottons. In case of skirt, they perceive A-lined, flared, pleats skirt more convieniently than tight one, which are 10cm under from kneeline in length, side fastening system, back slit.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.312-316
• /
• 1987

A simple hybrid circuit to control the two-phase AC motor of the nut-runners which employ the tightening torque control system is described in this paper. The circuit has emphasis on the low-cost implementation. The circuit constitutes of the V/F converter using a timer IC, the pulse width modulator using the fastening torque signal and the two-phase logic sequencer.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.207-212
• /
• 2002

The actual buckling of the railroad track structure is suspected to be a complex interaction between the vertical, lateral and torsional modes. To make the analysis tractable, however, most studies restrict themselves to either the vertical or the horizontal plane. Based on a comprehensive and realistic three-dimensional track model developed in the previous study, three dimensional buckling analysis of CWR track subjected to temperature load was performed. Using the study on buckling temperature and mode, sensitivity of track components such as tie spacing, ballast resistance, stiffness of pad-fastening system and rail size were investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.35-42
• /
• 2019

Nut fasteners that require ultra-precise control are required in the overall manufacturing industry including electronic products that are currently developing with the automobile industry. Important performance factors when tightening nuts include loosening due to insufficient fastening force, breakage due to excessive fastening, Tightening torque and angle are required to maintain and improve the assembling quality and ensure the life of the product. Nut fasteners, which are now marketed under the name Nut Runner, require high torque and precision torque control, precision angle control, and high speed operation for increased production, and are required for sophisticated torque control dedicated to high output BLDC motors and nut fasteners. It is demanded to develop a high-precision torque control driver and a high-speed, low-speed, high-response precision speed control system, but it does not satisfy the high precision, high torque and high speed operation characteristics required by customers. Therefore, in this paper, we propose a control technique of BLDC motor variable speed control and nut runner based on vector control and torque control based on coordinate transformation of d axis and q axis that can realize low vibration and low noise even at accurate tightening torque and high speed rotation. The performance results were analyzed to confirm that the proposed control satisfies the nut runner performance. In addition, it is confirmed that the pattern is programmed by One-Stage operation clamping method and it is tightened to the target torque exactly after 10,000 [rpm] high speed operation. The problem of tightening torque detection by torque ripple is also solved by using disturbance observer Respectively.

• Journal of the Korean Society of Costume
• /
• v.66 no.1
• /
• pp.108-121
• /
• 2016

The objective of the study is to propose diverse knitwear designs by expanding the scope of the use and application of knit fabric. The study looked into diversifying the knitwear designs by using different types of zippers and with the combination of the diversity given by the zipper used in attachable and detachable method and the traditional North European knit patterns. One way of contributing to the diversity of fashion design is to use the zipper, as it can be implemented as an attachable and detachable fastening system. Also, the combination of North European traditional knit patterns with knit fabric can create a new and unique knit styling. The content of the research focuses on the history and definition of North European traditional knitwear based on the analysis of theoretical background, types, and characteristics of the knit patterns. Case studies were observed to show the application of knit patterns. The methods of the study used are preceding research along with research, collection, analysis of data, information from Korean and foreign literature, and Internet websites. During knitwear production, the two types of zippers were used in combination with four traditional Northern European knitwear Aran, Fair Isle, Nordic, and Ropy. The knitting techniques applied in the process were cable fisherman (5GG, SES 124CS) and Tubular Jacquard (3GG, 7GG, SES 122CS) for knitting machinery, and the technique of whole garment for hand knitting.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.3
• /
• pp.303-309
• /
• 2005

Numerical analysis is carried out to identify the appropriateness of the design codes that is available for the tensile design of fastening system at Nuclear Power Plant (NPP) in this study. This study is intended for the cast-in-place anchor that is widely used for the fastening of equipment in Korean NPPs. The microplane model and the elastic-perfectly plastic model are employed for the quasi-brittle material like concrete and for the ductile material like anchor bolt as constitutive model for numerical analysis and smeared crack model is employed to simulate the clack and damage phenomena. The developed numerical model is verified on a basis of the various test data of cast-in-place anchor. The appropriateness of both ACI 349 Code and CEB-FIP Code is evaluated for the tensile design of cast-in-place anchor and it is proved that both design codes give a conservative results for real tensile capacity of cast-in-place anchor.