• 전력전자학회논문지
• /
• 제6권5호
• /
• pp.400-409
• /
• 2001

대용량 승압형 응용을 위한 새로운 위상천이 병렬입력/직렬출력 듀얼 컨버터가 제안된 바 있다. 제안된 컨버터는 종래의 펄스 폭 변조(PWM) 방식의 병렬입력/직렬출력 듀얼 컨버터에 비해 낮은 스위치 전압 스트레스를 보여 저 손실의 소자를 사용할 수 있으므로 높은 효율을 보인다. 또한, 출력 캐패시터의 실효(RMS) 전류 스트레스가 낮고 입력 전류와 출력 전압의 맥동이 작으며, 제어 입력에 대한 출력 전압의 동역학(dynamics)이 빠른 장점이 있다. 본 논문에서는 제안된 컨버터의 정상상태 동작을 심도 있게 분석하고 그 수학적 모델 및 정상상태 해를 제시하며, 제안된 컨버터의 특징을 종래의 PWM 방식의 컨버터와의 비교를 통해 정량적으로 분석한다. 또한, 제안된 회로의 동작, 특성 및 유효성을 검증하기 위해 800W급 24-350Vdc 사양의 시작품으로부터의 실험 결과를 제시한다.

• 한국재료학회지
• /
• 제8권8호
• /
• pp.678-684
• /
• 1998

정압분자동역학 시뮬레이션에 의하여 주기경계조건을 지닌 L-J 입자들로 구성된 계의 액체-유리-결정 전이를 연구하였다. 원자체적과 엔탈피는 가열 및 냉각과정에서 온도의 함수로 계산되었다. 반경분포함수로부터 유도된 Wendt-Abraham비와 단거리규칙도를 나타내는 각도분포함수를 분석하여 액체, 유리 및 결정상태를 구분하였다. 초기 fcc 결정을 가열하여 얻은 액체상은 급냉시에 비정질화하나 서냉시엔 결정화하였다. 급냉으로 생긴 유리는 다시 서서히 가열하면 fcc로 결정화하였다. 자유표면을 지닌결정은 표면에서부터 용해가 시작되어 벌크에 비하여 낮은 온도에서 녹고 냉각시에는 빠른 냉각속도에서도 결정화가 쉽게 일어나는 경향을 보였다.

• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.3034-3042
• /
• 2022

The results of radioecological monitoring of the cooling pond Beloyarsk NPP (Russia) have been presented. The influence of waste technological waters of thermal and fast NPP reactors on the content of artificial radionuclides in surface waters and bottom sediments of the Beloyarsk reservoir has been studied. The long-term dynamics of the specific activity of ⁶⁰Co, ⁹⁰Sr, ¹³⁷Cs and ³H in the main components of the freshwater ecosystem at different distances from the source of radionuclide discharge has been estimated. Critical radionuclides (⁶⁰Co and ¹³⁷Cs), routes of their entry and periods of maximum discharge of radioisotopes into the cooling pond have been determined. It is shown that the technology of electricity generation at Beloyarsk NPP, based on fast reactors, has a much smaller effect on the flow of artificial radionuclides into the freshwater ecosystem of the reservoir. During the entire period of monitoring studies, the decrease in the specific activity of radionuclides from NPP origin in surface waters was 4.3-74.5 times, in bottom sediments 10-505 times. The maximum discharge of artificial radionuclides into the reservoir was noted during the period of restoration and decontamination work aimed at eliminating emergencies at the AMB thermal reactors of the first stage of the Beloyarsk NPP.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.893-899
• /
• 2024

In a secondary cooling system of a sodium-cooled fast reactor (SFR), rapid detection of hydrogen due to sodium-water reaction (SWR) caused by water leakage from a heat exchanger tube of a steam generator (SG) is important in terms of safety and property protection of the SFR. For hydrogen detection, the hydrogen detectors using atomic transmission phenomenon of hydrogen within Ni-membrane were used in Japanese proto-type SFR "Monju". However, during the plant operation, detection signals of water leakage were observed even in the situation without SWR concerning temperature up and down in the cooling system. For this reason, the study of a new hydrogen detector has been carried out to improve stability, accuracy and reliability. In this research, the authors focus on the difference in composition of hydrogen and the difference between the background hydrogen under normal plant operation and the one generated by SWR and theoretically estimate the hydrogen behavior in liquid sodium by using ultra-accelerated quantum chemical molecular dynamics (UA-QCMD). Based on the estimation, dissolved H or NaH, rather than molecular hydrogen (H₂), is the predominant form of the background hydrogen in liquid sodium in terms of energetical stability. On the other hand, it was found that hydrogen molecules produced by the sodium-water reaction can exist stably as a form of a fine bubble concerning some confinement mechanism such as a NaH layer on their surface. At the same time, we observed experimentally that the fine H₂ bubbles exist stably in the liquid sodium, longer than previously expected. This paper describes the comparison between the theoretical estimation and experimental results based on hydrogen form in sodium in the development of the new hydrogen detector in Japan.

• 한국전산유체공학회지
• /
• 제19권4호
• /
• pp.29-36
• /
• 2014

A computational study of a thermal striping in the upper plenum of PGSFR(Prototype Generation-IV Sodium-cooled Fast Reactor) being developed at the KAERI(Korea Atomic Energy Research Institute) is presented. The LES(Large Eddy Simulation) approach is employed for the simulation of thermal striping in the upper plenum of the PGSFR. The LES is performed using the WALE (Wall-Adapting Local Eddy-viscosity) model. More than 19.7 million unstructured elements are generated in upper plenum region of the PGSFR using the CFX-Mesh commercial code. The time-averaged velocity components and temperature field in the complicated upper plenum of the PGSFR are presented. The time history of temperature fluctuation at the eight locations of solid walls of UIS(Upper Internal Structure) and IHX(Intermediate Heat eXchanger) are additionally stored. It has been confirmed that the most vulnerable regions to thermal striping are the first plate of UIS. From the temporal variation of temperature at the solid walls, it was possible to find the locations where the thermal stress is large and need to assess whether the solid structures can endure the thermal stress during the reactor life time.

• 한국응용곤충학회지
• /
• 제38권3호
• /
• pp.231-240
• /
• 1999

수원 지역에서의 이화명나방 발생의 장기적 경시적 변화 패턴을 분석하고 수원 지역에서의 이화명나방 봄나방(I화기) 발생시기 예찰 모델을 개발하였다.수원에서의 이화명나방의 개체군동태는 1965년부터 1996년까지 한 번의 큰 피크와 한 번의 작은 피크를 보인 주기적 변동을 보였으며 발생 변동의 큰 주기는 대략 36세대 (18년)로 분석되었다. 수원 지역에서의 이화명나방 발생동태는 l세대를 작은 주기로 하는 내적 유발성 주기성을 보였으며 전세대의 밀도의존성이 높은 제 l차 부의 피이드백 작용에 의해 지배되는 내적 동태성이 기본이었다. 이화명나방 개체군 변동 메카니즘은 밀도의 급격한 감소에도 불구하고 변화가 없었다.수원 지역의 이화명나방 발생 자료를 바탕으로 봄나방 발생시기 예찰 모델들(온도발육모델 및 온일도 모델)을 개발하였다.또한, 이화명나방 개체군 동태와 관련한 봄나방 성충 예찰 문제를 고찰하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2010년도 한국우주과학회보 제19권1호
• /
• pp.40.4-41
• /
• 2010

Using magnetic field and plasma moment data obtained by THEMIS satellites(A, D, and E), we selected 203 fast flow events accompanied by dipolarization in the near-Earth region( X(GSM) = -7 ~ -12 RE) and statistically examined their properties. It was found that most of the fast flows show the maximum velocity between 1 minute before dipolarization onset and 2 minutes after onset and proceed earthward and duskward. We also found that only the flows with low velocity of less than 400 km/s are observed at X > -8 RE, while the high velocity flows(as well as low velocity flows) are observed at the further tailward region(X < -8 RE). And most of the tailward flows are slow regardless of distance at X(GSM) = -7 ~ -12 RE. On the other hand, if we consider the fast flow as a bubble (Pontius and Wolf, 1990), the entropy parameter, PV5/3 is an important factor to describe the plasma sheet dynamics. Thus we investigated the relationship between the flow velocity and the amount of change in PV5/3 before and after dipolarization onset and found out that the dipolarizations with more depleted entropy parameter tend to show higher flow velocity. Also we examined how the magnetic field at geosynchronous orbit responds to the fast flow accompanied by dipolarization in the near-earth plasma sheet, using the measurements from GOES 11 and 12 statellites. We found that most of the fast flows do not reach geosynchronous orbit as suggested by Ohtani et al. (2006).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1607-1610
• /
• 1991

It is difficult to design the controller of an induction motor because of its non-linearity and high order dynamics. But it is possible to get reduced order system using the theory of singular pertubation because the dynamics of induction motor consists of fast stable mode and slow one. On the other hand, the sliding mode control is well-known for its performance of robustness. This paper deals with the sliding mode controller of induction motors based on the reduced order system.

• 수산해양기술연구
• /
• 제35권4호
• /
• pp.435-447
• /
• 1999

It is main objective of this approach to present a method to analyse stochastic design sensitivity for problems of structural dynamics with randomness in design parameters. A combination of the adjoint variable approach and the second order perturbation method is used in the finite element approach. An alternative form of the constant functional that holds for all times is introduced to consider the time response of dynamic sensitivity. The terminal problem of the adjoint system is solved using equivalent homogeneous equations excited by initial velocities. The numerical procedures are shown to be much more efficient when based on the fold superposition method: the generalized co-ordinates are normalized and the correlated random variables are transformed to uncorrelated variables, whereas the secularities are eliminated by the fast Fourier transform of complex valued sequences. Numerical algorithms have been worked out and proved to be accurate and efficient : they can be readily adapted to fit into the existing finite element codes whose element derivative matrices can be explicitly generated. The numerical results of two cases -2 dimensional portal frame for the comparison with reference and 3-dimensional frame structure - for the deterministic sensitivity analysis are presented.

• 한국융합학회논문지
• /
• 제4권3호
• /
• pp.43-50
• /
• 2013

This paper presents a model predictive control (MPC) based on a neural network (NN) model for air/fuel ration (AFR) control of automotive engines. The novelty of the paper is that the severe nonlinearity of the engine dynamics are modelled by a NN to a high precision, and adaptation of the NN model can cope with system uncertainty and time varying effects. A single dimensional optimization algorithm is used in the paper to speed up the optimization so that it can be implemented to the engine fast dynamics. Simulations on a widely used mean value engine model (MVEM) demonstrate effectiveness of the developed method.