• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.42-48
• /
• 2006

The aim of this work is to develop Thick-Thin polyester yarn(T-T yarn) with finer than 1 denier mono filament. The manufacture of T-T yarns were carried out in a draw-winder using 85d/72f PET filament with various spinning speed of 2700, 2900, and 3100 m/min, respectively. The structure and physical properties of T-T yarns with spinning speed and over feed ratio were examined by draw-winder processing the sample in $100^{\circ}C$ water for 20 min and drying in 120, 140, 160, and $180^{\circ}C$ of dry air for 20 min. The crystallinity, the birefringence and the initial elasticity modulus of T-T yarns increased with increased spinning speed of filament and the heat treatment temperature but at the temperatures higher than $140^{\circ}C$ the increased rates show a tendency to decrease. Moreover, the initial modulus and the tenacity of T-T yarns increased with decreasing the over feed ratio of filament and the those of T-T yarns decreases with increasing the heat treatment temperature. The shrinkage of T-T yarns decreased with decreasing spinning speed and increased over feed ratio of filaments. Consequently, the results indicate that the best T-T yarn under 1 denier was optimized from PET filament with spinning speed of 2700 m/min and over feed ratio of 0.67

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.282-291
• /
• 2010

Digital textile printing(DTP) is becoming more important because the production trend of textile printing goods is adapting to small-lot multiple items. Recently enhanced use of DTP is closely connected with production of high value-added products in fashion industry, which is also appropriate for quick response system(QRS). Quality of DTP depends on pre-treatment, after-treatment, ink, media, printer, etc. One of these parameters, Selection of good media is very important to obtain high quality of DTP products. Especially, the effects of media on printing quality of DTP according to yarn twist and structure of knitting fabric were examined in this study. Two types of yarn twist of 830 t.p.m and 1630 t.p.m for cotton knit were used and five types of media structures were knitted with single circular knitting machine. First, MIU, MMD, SMD's values are closely related with surface roughness of sample as well as printing quality. The hard twist samples were higher values than normal twist samples in the same media structure. In case of SMD, the values increased from plain to corduroy types. Second, aspect of line sharpness, line area, and line width values of hard twist samples decreased from plain to corduroy than those of normal twist samples. Third, line deviation values of hard twist samples, blurriness of line, also decreased than those of normal twist samples.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.1-9
• /
• 2009

A lot of research has been made over the recent decade to develop testing packages with antimicrobial properties to improve food safety. In this study, a new method, experimental device and technology for environmental corresponding packages of polypropylene (PP) film has been developed to provide effective temperature buffering during the transport/long-term storage of grains or foodstuffs from the supplier to the market. This quantitatively optimized mixing system enabled to produce PP films with the 700$\sim$1,400d (width;1.5$\sim$3mm, thickness;0.01$\sim$0.5mm). In the whole mixing systems, the finely-granulated inorganic illite and PP virgin chip for master batch (M/B) chip was calculated by digital measurement methods, and then the M/B chip for PP film was adapted through a air jet and PP grinding method. The prepared PP film was characterized with tensile strength and elongation, far infrared radiation (FIR) emissivity, antimicrobial activity and deodorization properties. The results revealed that the two differently grain-sized illite could be show homogeneously dispersed on PP chip surface, and as the increasing of illite content, the FIR emissivity and the anion emission rate of film was increasingly improved. In both of 325 and 1,500 mesh-sized illite contained PP chip, of course the antimicrobial activity was good. But the ultimate deodorization rate for ammonia gas of PP film were found to be approximately the same.

• 한국컴퓨터정보학회논문지
• /
• 제27권6호
• /
• pp.95-107
• /
• 2022

본 연구는 표준체형과 구별되는 BMI 25kg/m² 이상 비만 체형을 가진 20대 남성을 대상으로 비만 남성의 체간부에 적합한 보디스 원형을 개발하고자 하였다. 이를 통해 비만 남성의 상의 의류 개발에 도움이 되는 자료를 제공하고자 하였다. 20대 비만 남성 보디스 원형에 대한 1차 외관 및 의복압평가를 통해 앞몸판 어깨선, 앞처짐분 등의 패턴을 수정하였다. 2차 외관 및 의복압 평가를 통해 뒤진동둘레, 뒤허리선, 앞처짐분의 추가 등의 수정을 실시하였다. 3차 외관 및 의복압 평가를 통해서는 2차 평가를 통해 추가하였던 앞처짐분을 제거하여 최종 패턴 제도법을 개발하였다. 20대 비만 남성체형의 경우 복부의 돌출 및 자세 등으로 앞뒤허리선 설정, 뒤진동다트, 앞어깨선 설정 방법에 있어 표준체형과 구별되는 제도법이 요구되었다. 본 연구는 20대 비만 남성의 체형에 적합한 보디스 원형제도법을 제시하였다는 점에 그 의의가 있다. 후속 연구에서는 실제 착의실험과 20대 비만 남성 상의에 적용시켜 의복 패턴을 개발하는 연구가 이루어져야 할 것으로 생각된다.

• Natural Product Sciences
• /
• 제26권3호
• /
• pp.252-258
• /
• 2020

This study investigated the biochemical and histological changes associated with the co-administration of cisplatin and methanolic extract of Portulaca oleracea (MEPO) in adult Wistar rats. Twenty-four (24) adult female Wistar rats were randomly divided into six (6) groups (A-F) (n = 4). Group A served as the control group for the experiment and received no treatment. Group B was given a single dose of cisplatin and served as the cisplatin control group. Group C and D received 400 mg/kg and 800 mg/kg of MEPO 6 hours after a single dose cisplatin injection respectively. Group E and F received 400 mg/kg and 800 mg/kg of MEPO 6 hours before cisplatin injection. The cisplatin injection was 2 mL/kg given intraperitoneally for all groups. There was a significant increase in the serum levels of ALT, ALP, AST, total bilirubin, and conjugated bilirubin following cisplatin treatment (p = 0.000, 0.000, 0.039, 0.000, 0.004 respectively) with a consequent reversal due to MEPO administration across all treated groups (p = 0.000, 0.000, 0.000, and 0.000) in a dose-dependent fashion. Cisplatin caused the expansion of the red and white pulp in the spleen which was attenuated by MEPO. MEPO demonstrated a protective effect against cisplatin-induced liver and spleen toxicity.

• 대한화학회지
• /
• 제42권6호
• /
• pp.679-695
• /
• 1998

A series of ${\alpha}{\omega}-bis[4-(4'-(S)-(+)-2-methylbutylbiphenyl-4-carboxy)phenoxy]alkanes$, were synthesized, and their thermal and liquid crystalline properties were studied. The chain length of the central polymethylene spacers, x, of the chiral twin compounds was varied from 3 to 12. These compounds were characterized by elemental analysis, IR and NMR spectroscopy, differential thermal analysis (DSC), and crosspolarized microscopy. All compounds were found to be enantiotropic liquid crystalline, and the values of melting $(T_m)$ and isotropization temperature $(T_i)$ as well as ${\delta}H_I$ and ${\delta}S_I$ decreased in a zig-zag fashion, revealing the so called odd-even effect as x increased. Their mesomorphic properties fell into four categories depending upon x; (a) compounds with x=3, 4 and 5 formed only a cholesteric phase on heating, while on cooling they went through two transitions of isotropic (I)-to-cholesteric (Ch) and Ch-to-smectic $A\;(S_A)$ phases before crystallization. (b) compounds with x=6, 8 and 10 exhibited only a cholesteric phase both on heating and on cooling. (c) compounds with x=7 and 9 went through three transitions of crystal $(C)-to-S_A,\;S_A-to-Ch,$ and Ch-to-I phases on heating while on cooling they went through four transitions of I-to-Ch, $Ch-to-S_A,\;S_A-to-Smectic\;C\;(S_C),\;and\;S_c-to-C$ phases in that order, and (d) compounds with x=11 and 12 went reversibly through four transitions of $C-to-S_C,\;S_C-to-S_A,\;S_A-to-Ch,$ and Ch-to-I phases.

• 한국해양바이오학회지
• /
• 제1권4호
• /
• pp.243-251
• /
• 2006

Dideoxypetrosynol A, a polyacetylene from the marine sponge Petrosia sp., is known to exhibit significant selective cytotoxic activity against a small panel of human tumor cell lines, however, the mechanisms of which are poorly understood. In the present study, it was investigated the further possible mechanisms by which dideoxytetrosynol A exerts its anti-proliferative action in cultured human leukemia cell line U937. We observed that the proliferation-inhibitory effect of dideoxypetrosynol A was due to the induction of G1 arrest of the cell cycle and apoptosis, which effects were associated with up-regulation of cyclin D1 and down-regulation of cyclin E without any change in cyclin-dependent-kinases (Cdks) expression. Dideoxypetrosynol A markedly induced the levels of Cdk inhibitor p16/INK4a expression. Furthermore, down-regulation of phosphorylation of retinoblastoma protein (pRB) by this compound was associated with enhanced binding of pRB and the transcription factor E2F-1. The increase in apoptosis was associated with a dose-dependent up-regulation in pro-apoptotic Bax expression and activation of caspase-3 and caspase-9. Dideoxytetrosynol A decreased the levels of cyclooxygenase (COX)-2 mRNA and protein expression without significant changes in the levels of COX-1, which was correlated with a decrease in prostaglandin E2 (PGE2) synthesis. Furthermore, dideoxytetrosynol A treatment markedly inhibited the activity of telomerase, and the expression of human telomerase reverse transcriptase (hTERT), a main determinant of the telomerase enzymatic activity, was progressively down-regulated by dideoxytetrosynol A treatment in a dose-dependent fashion. Taken together, these findings provide important new insights into the possible molecular mechanisms of the anti-cancer activity of dideoxytetrosynol A.

• 건축역사연구
• /
• 제12권1호
• /
• pp.25-41
• /
• 2003

This paper is a study of Le Corbusier's trace regulateur of the 1920s, particularly its role in the design of the Villas La Roche-Jeanneret and Stein-de Monzie. It proceeds on the basis of the following three themes: first, the relation between the regulating line and the dom-ino frame; second, its status as a proportional device based not on a module system but one that defines relations; third, its function as an essential practical device in the design process. In the Villa La Roche-Jeanneret, the embedded horizontal planes of the dom-ino frame were constant, but the vortical lines of the columns were altered according to the changes in plan. Initially, a left-hand bay window formed a symmetry with the right-hand bay window, the only constant in the design process. With subsequent changes, mullion sections of the horizontal window and roof elements came to provide the reference points for the regulating line. Eventually, a regulating line different from the one that controlled the bay window and the elongated volume came to control the entrance hall of Villa La Roche, resulting in three different kinds of regulating lines in the final version. In contrast to the Villa La Roche-Jeanneret, a singular and consistent regulation line was anticipated in the earliest design stages of the Villa Stein-de Monzie. The repetition of its A:B grid and the standard $2.5m{\times}1.0m$ sliding window determined the proportions of both its plan and elevation, and thus the regulating line became 'automatic,' losing its viability as a practical tool. Though the regulating titles of the La Roche-Jeanneret look as if they were an afterthought, drawn after the design was complete, they were most active, requiring tenacity and discipline in their application. On the other hand, the seemingly 'redundant' regulating line of the Villa Stein-de Monzie gains its raison d'etre from the dom-ino frame. Its cantilevers and uninterrupted horizontal window could be used in decisive fashion because of the guarantee that the correct proportion would always be maintained. Thus we discover that Le Corbusier's discipline of the 1920s had a certain spectrum of flexibility. His 'parti' ranged from the extremely loose and malleable grid of the Villa La Roche-Jeanneret to the fixed grid of the Villa Stein-de Monzie. In different ways, these projects retain the tension between the dom-ino frame and the regulating line. For Le Corbusier, as much as the grid was an object with fixed attributes, it was also an active medium manipulated by the will of the architect.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.107-107
• /
• 2012

3종 복합소재인 양모와 나일론, 레이온의 염색공정은 먼저 알칼리 욕에서 반응성염료로 레이온을 염색한 후, 산성욕에서 산성염료로 양모와 나일론을 염색하는 것이 일반적이다. 그런데 양모, 나일론, 레이온은 알칼리에 민감하므로 면 염색 시 적용되는 강알칼리인 수산화나트륨을 사용하면 섬유의 취화로 인하여 강도와 촉감저하 등의 문제가 발생하게 된다. 따라서 본 연구에서는 알칼리 중 탄산나트륨과 중탄산나트륨을 사용하여 염료를 투입하지 않고 염색공정을 거친 후 백도와 인장강도를 측정하여 황변 및 강도 변화 여부를 알아보았다. 레이온 70%, 양모 19%, 나일론 11%의 혼용율을 가지는 전처리 된 편물(130$g/m^2$, 32 inch, 18 gauge)에 탄산나트륨(시약 1급) 20g/l과 중탄산나트륨(시약 1급) 20g/l 각각을 투입하고 반응성염색공정($60^{\circ}C$, 60 min)으로 처리한 경우와 반응성 염색 후 산성염색공정($98^{\circ}C$, 60 min)으로 처리한 경우로 나누어 측색을 통해 백도와 L, a, b값을 측정하고 KS K 0521에 따라 인장강도 시험을 실시하였다. 그 결과, 탄산나트륨 투입시 백도 값이 중탄산나트륨에 비해 10% 정도 낮아지고 L, a, b값도 상대적으로 yellow 방향으로 이동해 있는 것으로 나타났다. 이것은 황변이 일어남을 의미하며 육안으로 확인하였다. 또한 인장강도 측정결과를 통해 소다회 처리 시 중조에 비해 30% 정도의 강도 저하가 일어남을 확인할 수 있었다. 그러나 반응성염색 후 산성염색을 거치게 되면 황변과 강도 저하 현상이 회복되는 경향을 나타내었다. 즉, 천연/나일론 편물을 반응성염색 시 알칼리로 탄산나트륨을 사용하면 염색공정 상에서 중탄산나트륨에 비해 황변이 일어나 염료 고유의 색상 발현에 영향을 줄 수 있고 강도 또한 30% 정도 저하되지만, 후에 산성염색 공정을 거치면 산 조건과 욕중 효과를 통해 일부 개선됨을 확인하였다. 이와 별도로 이번에는 시판되는 반응성염료 5종과 산성염료 3종을 조합하여 탄산나트륨과 중탄산나트륨 투입에 따른 염색실험을 실시하고 측색(DataColor SF600 광원D65, Strength)을 통해 염착량을 비교하였다. 그 결과, 중탄산나트륨으로 염색하면 탄산나트륨에 비해 모두 염착량이 저하되었으며, 염료의 구조적 차이와 컬러별로도 그 차이는 다양하였다. 그 중 저온에너지형 반응성염료는 탄산나트륨 투입에 비해 47~60% 정도로 가장 양호하였으며, 일부 반응성염료는 20%까지 떨어지는 값을 나타내었다. 이것은 탄산나트륨보다 중탄산나트륨의 알칼리 정도가 낮으므로 반응성염료의 염착이 적은 것으로 생각되며, 저에너지형 반응성염료의 경우에는 낮은 온도나 알칼리 조건에서도 상대적으로 높은 고착률을 나타내므로 적절한 반응성염료의 선택을 통해 그 차이를 극복할 수 있을 것으로 사료된다. 이상의 결과를 통해 탄산나트륨과 중탄산트륨의 알칼리 정도가 강도와 염착량에 미치는 영향의 차이를 고려하여 최적의 현장 처방을 선정해야 함을 알 수 있었다.

• 한국운동역학회지
• /
• 제16권3호
• /
• pp.137-148
• /
• 2006

The purpose of this study was to compare muscle activity in the lower extremity during walking wearing jogging and roller shoes. Twelve male middle school students (age: 15.0 yrs, height 173.7 cm, weight 587.7 N) who have no known musculoskeletal disorders were recruited as the subjects. Seven pairs of surface electrodes (QEMG8, Laxtha Korea, gain = 1,000, input impedance >$1012{\Omega}$, CMMR >100 dB) were attached to the right-hand side of the body to monitor the rectus femoris (RF), vastus medialis (VM), vastus lateralis (VL), biceps femoris (BF), tibialis anterior (TA), and medial (GM) and lateral gastrocnemius (GL) while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and EMG recordings. EMG data were filtered using a 10 Hz to 350 Hz Butterworth band-passdigital filter and further normalized to the respective maximum voluntary isometric contraction EMG levels. For each trial being analyzed, five critical instants and four phases were identified from the recording. Averaged IEMG and peak IEMG were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p<.05). The VM, TA, BF, and GM activities during the initial double limb stance and the initial single limb stance reduced significantly when going from jogging shoe to roller shoe condition. The decrease in EMG levels in those muscles indicated that the subjects locked the ankle and knee joints in an awkward fashion to compensate for the imbalance. Muscle activity in the GM for the roller shoe condition was significantly greater than the corresponding value for the jogging shoe condition during the terminal double limb stance and the terminal single limb stance. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the GM activity for the roller shoe condition increased. It seems that there are differences in muscle activity between roller shoe and jogging shoe conditions. The differences in EMG pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine joint kinematics during walking with roller shoes.