• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.181-184
• /
• 2009

The hot press farming process, which is the press hardening of steel parts using cold dies, can utilize both ease of shaping and high strength due to the hardening effect of rapid quenching during the pressing. In this study, a thermo-elastoplastic analysis of the hot press forming process using the finite element method was performed in order to investigate the deformation behavior and temperature history during the process and the mechanical properties of the pressed parts.

• Journal of Plant Biotechnology
• /
• v.37 no.3
• /
• pp.269-274
• /
• 2010

As the capture fishing industry has declined, the aquaculture industry has become an important source of seafood. With this tendency all fish farming will be performed by large-scale farms where the fish are cultivated in much high density and as a result the incidence of infectious diseases increases. Therefore, vaccination has become an increasingly important part of aquaculture as a cost effective method of controlling various diseases. The early fish vaccines were the formalin inactivated bacteria or virus cultures, which were administered by either immersion or injection. Recombinant DNA biotechnology allowed us to develop orally administrated DNA and recombinant vaccines. In terms of the manufacturing process and cost, Lemna and Spirodela is the most efficient and reliable plant expression system for the production of edible vaccine.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2002.10a
• /
• pp.445-448
• /
• 2002

In this study, we investigated concentrations and loads of nutrients in the paddy plots with conventional and environmental farming method. For two experimental plot, type of fertilizer for basal dressing was different but total applied fertilizer rates was almost identical. The nutrient concentrations in irrigation and percolated water were almost constant, while the ponded water significantly increased after fertilizer application. The nutrient concentrations in ponded water at long distance from inlet was higher than those at short distance due to longer detention time.

• Proceedings of the Korean Society of Rural Planning Conference
• /
• 1998.03a
• /
• pp.15-16
• /
• 1998

It was studied Horticultural field by ARC/lNFO software, applicated on GIS- management information system, which dealt with graphic and attribute data together. This result obtained was summarized as follow : 1. It would be to output about position, attribute and photographic data of this horticultural farm through AML. 2. It would be easy to use with internal interface which is composed in basic function menu and application menu. 3. It would be good to plant Water melon and Tomato in this Horticultural farm. 4. The method which applicated overlay and analysis would be need to manage farming data in this horticultural farm and to develop a dynamic decision support system interfaced with GIS.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.05a
• /
• pp.190-193
• /
• 2004

Ever since the ideal forming theory has been developed fur process design purposes, application has been limited to sheet forming and, for bulk forming, to two-dimensional steady flow. Here, application for the non-steady case was performed under the plane-strain condition based on the theory previously developed. In the ideal flow, material elements deform following the minimum plastic work path (or mostly proportional true strain path) so that the ideal plane-strain flow can be effectively described using the two-dimensional orthogonal convective coordinate system. Besides kinematics, for a prescribed final part shape, schemes to optimize a preform shape out of a class of initial configurations and also to define the evolution of shapes and boundary tractions were developed. Discussions include the two problematic issues on internal tractions and the non-monotonous straining. For demonstration purposes, numerical calculations were made for a bulk part under forging.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.2
• /
• pp.53-56
• /
• 2010

Oil spills and red tide can be very damaging to the environment and fishery farming. These catastrophic accidents must be detected as quickly as possible. In this paper, we report the results of applying the wavelet transform to SAR or marine radar images for the detection of the boundaries of an oil spill or red tide. The application of the wavelet transform to these phenomena looks quite promising in detecting the boundaries of oil spills and red tide areas.

• Transactions of Materials Processing
• /
• v.15 no.3 s.84
• /
• pp.189-194
• /
• 2006

In this paper, an automated adaptive mesh generation scheme, based on an advancing-front-Delaunay method, is presented fur finite element simulation of three dimensional bulk metal farming processes. Basic approach is introduced in detail, including a surface meshing and volume meshing technique and a mesh density control scheme. The presented approach is applied to automatic forging simulation in order to evaluate the effect of the developed schemes. Comparison shows a good agreement between required mesh density and generated mesh density, implying that the presented approach is appropriate for automatic mesh generation in metal forming simulation.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.160-169
• /
• 2001

To predict busting failure in tubular hydroforming, the criteria for ductile fracture proposed by Oyane is combined with the finite element method. From the histories of stress and strain in each element obtained from finite element analysis, the fracture initiation site is predicted by mean of the criterion. The prediction by the ductile fracture criterion is applied to three hydroforming processes such as a tee extrusion, an automobile rear axle housing and lower am. For these products, the ductile fracture integral I is not only affected by the process parameters, but also by preforming processes. All the simulation results show the combination of the finite element analysis and the ductile fracture criteria is useful in the prediction of farming limit in hydroforming processes.

• Korean System Dynamics Review
• /
• v.11 no.1
• /
• pp.27-57
• /
• 2010

This article deals with an ecological-economic analysis of the 'Pasture Project of Kum River', which is the farming plan of mitten crabs using Jichun, a stream of the River Kum where the natural propagation of mitten crabs are blocked because of the estuary dam constructed in 1990. Toward analyzing the ecological and economic effects of the crab releasing and harvesting activities in Jichun, a two-stage cohort model of population dynamics with cannibalistic behaviors and density restrictions in biomathematics is adopted, despite of the current infertility in Kum, considering the opportunity of establishing dam fishways in the near future. This study moreover presents a method of parameter estimation especially with assuming a steady state of the ecosystem, and performs various analyses such as the risk measurement of climate change and the economic value of such fishways.

• Mycobiology
• /
• v.30 no.2
• /
• pp.88-92
• /
• 2002

Rehmannia glutinosa is a perennial medicinal plant belonging to the family Scrophulariaceae with more than 300 species known in the world, especially in temperate regions. Its roots have been used widely in Korea for medicinal purposes. However, it is commonly infected by various pathogens during storage, causing great damage to the roots, and impedes the intensive farming of the crop. Therefore, an attempt has been made to isolate and screen a resistance gene against the pathogen Fusarium oxysporum using differential display. We treated salicylic acid(SA), and isolated a resistance gene that responds to SA. As a result, we found that SA was involved in plant defense mechanism in pathogenicity tests with SA treated and non-treted plants, and we isolated a partial PR-la gene through differential display polymerase chain reaction(DD-PCR) method.