• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.745-748
• /
• 2002

Many malfunctions take place in container crane spreader due to impact. So we designed a 2DOF hydraulic impact absorbing system and studied the change of impulse with respect to the variation of falling height and weight. The falling height becomes higher than 1m and the falling weight goes up heavier than 100kg, the impact absorbing rate was lower. When spreader is bumped against container and impulse force concentrates on one point, impact absorbing equipment would not be operated properly and make some trouble.

• International Journal of Automotive Technology
• /
• 제4권4호
• /
• pp.203-211
• /
• 2003

This paper describes a method for a falling weight impact test to estimate the impact energy absorbing characteristics and impact strength of CFRP (Carbon-fiber reinforced plastics) laminate plates based on considerations of stress wave propagation theory, which were converted to measurements of load and displacement verses time. The delamination area of impacted specimens for the different ply orientations was measured with an ultrasonic C-scanner to determine the correlation between impact energy and delamination area. The energy absorbed by a quasi-isotropic specimen having four interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the greater the energy absorbed. The absorbed energy of a hybrid specimen embedding GFRP (Glass-fiber reinforced plastics) layer was higher than that of normal specimens. Also, a falling weight impact tester was built to evaluate the characteristics and impact strength of CFRPs.

• 대한의용생체공학회:의공학회지
• /
• 제24권3호
• /
• pp.233-239
• /
• 2003

측방 낙상에 관계된 상해는 노인들에 있어서 가장 치명적이고 빈번한 의료 문제를 야기한다. 측방 낙상에 의해 발생하는 심각한 결과 중 하나인, 고관절 골절은 넘어진 사람 중 약 1%에서만 발생하지만 고관절 골절은 신체장애, 사망 및 이에 관련된 의료비용의 상승 등을 초래한다. 본 연구에서는 측방 낙상시 고관절 골절에 큰 영향을 미치는 충돌 단계에서의 위험요소를 하중각도로 가정하여 이 요소에 대한 영향과 직립시와 비교하여 상대적인 위험도를 비교하고자 하였다. 실험 조건은 이전 연구자의 자료를 토대로 모사골반을 구성하였고, 이렇게 구성된 모사골반을 진자형 충격 시험기에 고정시키고 충격각도(0$^{\circ}$, 15$^{\circ}$, 30$^{\circ}$)를 변화시켜가며 대퇴골의 동적 거동을 조사하였다. 본 실험을 통하여 하중각도의 변화가 대퇴골 근위부에서의 변형에 영향을 주며, 다른 부위에 비해 대퇴골 경부에 상대적으로 큰 변형이 생겨 골절 가능성이 높다는 것을 확인하였다. 또한 낮은 충격속도에서도 직립 상태에 비해 큰 변형을 보였으며, 변형 분포의 차이도 나타내었다. 따라서 변형 크기의 차이뿐만 아니라 이러한 변형 분포의 차이도 고관절 골절 기전에 영향을 줄 것으로 사료된다.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.210-220
• /
• 2001

This paper aims at the evaluation on the characterization of CFRP laminate plates using falling weight impact tester. The experimentation was conducted on several laminates of different fiber and ply orientation. A system was built for the impact strength of CFRP laminates in consideration of stress wave propagation with using drop-weight impact tester as one of impact test. Absorbed energy of orthotropic composites with using T300 fiber, which are composed of the same fiber and stacking number is higher than that or quasi-isotropic specimen over impact energy 7J, but in case or using T700 fiber, much difference does not show. Also, absorbed energy of orthotropic composites with using T300 fiber, which are composed or stacking number and orientation became more than that of T700 fiber specimen; however great change doesn't show in case of quasi-isotropic specimens. It is found that influence was confirmed between impact energy and absorbed energy as the impact energy is increased with adding the falling weight.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.151-159
• /
• 2012

The characteristics of an impact load and pressure were experimentally investigated. Drop tests were carried out using a modified Wigley with CB = 0.56. The vertical force, pressures, and vertical accelerations were measured. A 6-component load cell was used to measure the forces, piezo-electric sensors were used to capture the impact pressure, and strain-gauge type accelerometers were used to measure the vertical accelerations. A 50-kHz sampling rate was applied to capture the peak values. The repeatability of the measured data was confirmed and the basic characteristics of the impact load and pressure such as the linearity to the falling height were observed for all of the measurements. A simple formula was derived to extract the physical impact load from the measured force based on a simple mass-sensor-mass diagram, which was validated by comparing impact forces with existing data using the mathematical model of Faltinsen and Chezhian (2005). The effects of the elasticity of the model and change in acceleration during the water entry were investigated. It is interesting to observe that the impact loads occurred and reached peak values at the same time duration after water entry for all drop heights.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.48-56
• /
• 2001

In this paper, this study aims at the evaluation on the characteristics of CFRP laminate plates using a falling weight impact tester. The experiment was conducted on several laminates of different orientation. A system was built far measur- ing the impact strength of CFRP laminates in consideration of stress wave propagation theory using a falling weight impact tester. Delamination areas of impacted specimens for the different ply orientation were measured with ultrasonic C- scanner to find correlation between impact energy and delamination area. Absorbed energy of quasi-isotropic specimen having flour interfaces was higher than that of orthotropic laminates with two interfaces. The more interfaces, the greater the energy absorbed. The absorbed energy oft hybrid specimen containing a GFRP layer was higher than that of normal specimens.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.963-968
• /
• 2013

In this study, we carried out a structural analysis for determining the stresses acting on the tempered glass of a freely falling cellular phone using ANSYS 13.0, commercial finite element code. We designed a phone heavier than any contemporary cellular phone and performed finite element analysis using the falling speed at a height of 104 cm, which is equal to of the average leg length of Koreans. By determining the maximum stress acting on the phone's tempered glass and frame, we identified the location of large deformation. Furthermore, we evaluated the maximum/minimum equivalent stress and deformation of the reinforced glass and frame as functions of time.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권2호
• /
• pp.89-97
• /
• 2021

This research aims to investigate the impact of falling oil prices at the beginning of 2020 on 82 industrial companies listed on the GCC stock markets. The research sample period is divided into two periods pre-COVID and during COVID covering the period starting 1st January 2020 to May 15, 2020. The research uses the Panel Least Square (PLS) method and Panel Generalized Method of Moments (GMM) with fixed and random effects in each country. The results of GMM models reveal a positive relationship between oil prices and the share prices of industrial companies in the Gulf countries, which confirms that the share prices of industrial companies in the Gulf Cooperation Council (GCC) countries have been negatively affected by the decline in oil prices with the beginning of 2020. The findings show that the highest impact of falling oil prices has been recorded in the industrial companies in the kingdom of Saudi Arabia. However, the falling of oil prices does not have a significant effect on industrial companies in the state of Qatar. The research results suggest that GCC economies have to move on the path of non-reliance on Oil and gas-driven economy.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.85-88
• /
• 2002

We have implemented a system of falling weight impact tester. Absorbed energy of orthotropic composites with using T300 fiber, which are composed of the same fiber and stacking number is higher than that of quasi-isotropic specimen over impact energy 7J, but in case of using T700 fiber, much difference does not show. Also, absorbed energy of orthotropic composites with using T300 fiber, which are composed of stacking number and orientation became more than that of T700 fiber specimen; however great change doesn't show in case of quasi-isotropic specimens. Delamination area of impacted specimens was measured with ultrasonic C-scanner to find correlation between impact energy and delamination area. Delamination area and frequency responses was evaluated between impacted and unimpacted specimens. There is a strong correlation between frequency responses and impact-induced delamination. The presence and scale of damages have been investigated based on the variations of frequency responses.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.106-109
• /
• 2000

Impact tester was build up to evaluate the characterization of CFRP laminate plates under the low velocity impact. The tests were conducted on several laminates of different ply orientation A system was budded for the impact strength of CFRP laminates in consideration of stress wave propagation theory using drop-weight impact tester as one of impact test. Results indicate that absorbed energy of quasi-isotropic specimen having four interfaces is higher than that of orthotropic laminates with two interfaces. Also the damage area was measured with ultrasonic C-scanner on some samples. In the specimens the relationship was linear between damaged area and absorbed energy to some degree. Absorbed energy in the specimen that ply number, interface number and fiber stacking sequences is same but having hybrid is higher than that of orthotropic laminates without hybrid.