• Journal of the Korean Geotechnical Society
• /
• v.19 no.2
• /
• pp.227-236
• /
• 2003

The evaluation of the reliable strength and deformation characteristics of weathered granite masses is very important for the design of geotechnical structure under working stress conditions. Various types of laboratory test such as triaxial compression test can be performed to determine the strength parameters. However, it is very difficult to obtain the representative undisturbed samples on the site and also the rock specimen cannot represent rock mass including discontinuities, fracture zone, etc. This study aims to investigate the strength and deformation characteristics of granite masses corresponding to its weathering and develop a practical strength parameter evaluation method using the results of PMT. To predict weathering intensity and strength parameters of the weathered granite masess in the field, various laboratory tests and in-situ tests including field triaxial test and PMT are carried out. Based on the results of weathering index tests, the classification method is proposed to identify the weathering degree in three groups for the weathered granite masses. Using the analytical method based on the Mohr-Coulomb failure criteria and the cavity expansion theory, the strength parameters of rock masses were evaluated from the results of PMT. It shows that weathering intensity increases with decreasing the strength parameters exponentially. The strength parameters evaluated with the results of PM almost coincide with the results of field triaxial test.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.9
• /
• pp.23-30
• /
• 2012

This paper is research results of slope stability analysis associated with seepage infiltration for unsaturated soil in debris-flow occurrence slopes. Site investigations were carried out in two slopes, located at Inje in Kangwon province where debris flow occurred in 2006 and at Yangpyung in Kyeunggi province where it occurred in 2010. For unsaturated soil sampled at the zone of debris-flow initiation, soil water characteristic curves with tempe pressure cells and shear strength parameters with newly designed shear strength apparatus were obtained respectively. The commertially available software SEEP/W was used to analyze seepage infiltration in unsaturated soil, based on their properties obtained from test results and the actual rainfall data at the moment of debris flow occurrence, and slope stability analysis with the program of SLOPE/W, associated with results of seepage analysis, was performed to simulate slope failure. As results of this research, seepage infiltration to unsaturated soil due to intensive rainfall was found to cause increase of ground water table as well as degree of saturation. Through this research slope stability analysis for unsaturated soil, considering the actual rainfall characteristic, might be a reasonable method of investigating characteristics of debris flow behavior, in particular, the moment of debris flow occurrence.

• The Journal of the Korean dental association
• /
• v.47 no.11
• /
• pp.758-768
• /
• 2009

Purpose : Schulte introduced immediate implant cases in 1970s, since then many patients have been treated by immediate implants. The aim of this study was to evaluate the cumulative survival rate of immediate implant and to analyze various factors associated with survival of immediate implant in a 8-year period retrospectively. Materials and methods : From May, 2000 to October, 2007, 77 implants were placed in 63 patients immediately after tooth extraction at Department of Periodontology, Yonsei University Hospital. The implant survival rate was analyzed using a life-table analysis. After delivery of prosthesis, along 1 year of observation period, all implants were evaluated clinically and radiographically. Results : Among 77 implants, 59 were placed in maxilla and 18 in mandible. The most common site of the implantation was Mx anterior (65%). The overall survival rate was 94.8% over a mean follow-up period of $44.2{\pm}21$ months and the 8-year cumulative survival rate was 94.6%. Failure occurred in 4 implants, all of which were due to early failures. None of the following factors were significantly associated with the survival of immediate implants: advanced surgical technique including bone graft and guided bone regeneration, the types of implants, causes of tooth loss, and types of prosthesis. Conclusion : On the basis of 8-year life time analysis, immediate implant placement can be considered a safe and predictable treatment mordality.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.4
• /
• pp.260-269
• /
• 2019

The prolonged neglect of the posterior teeth missing area may cause mesial drift, extrusion, unexpected movement of the adjacent teeth and alveolar bone loss with occlusion collapse. Therefore it is recommended to treat that area by the prosthesis as soon as possible after tooth missing. However, if orthodontic treatment is applied to move the remained teeth, it can create improved biomechanical dentoalveolar environment. The use of the third molars in teeth missing area provides advantages as optimizing of prosthesis size. However, crown shape, location, soundness of the third molar and possible of eruption failure should be considered. In this case report, two patients closed a second teeth missing site and reduced the size of the first and second teeth missing area for an implant by protraction of impacted third molars. This case reports the considerations for closing or reducing the posterior teeth space with protracting the third molars by comparing two patients.

• The KIPS Transactions:PartB
• /
• v.18B no.3
• /
• pp.117-130
• /
• 2011

The purpose of this study is to produce a better way to detect crossroad accidents, which involves an efficient method to produce background images in consideration of object movement and preserve/demonstrate the candidate accident region. One of the prior studies proposed an employment of traffic signal interval within crossroad to detect accidents on crossroad, but it may cause a failure to detect unwanted accidents if any object is covered on an accident site. This study adopted inverse perspective mapping to control the scale of object, and proposed different ways such as producing robust background images enough to resist surrounding noise, generating candidate accident regions through information on object movement, and by using edge information to preserve and delete the candidate accident region. In order to measure the performance of proposed algorithm, a variety of traffic images were saved and used for experiment (e.g. recorded images on rush hours via DVR installed on crossroad, different accident images recorded in day and night rainy days, and recorded images including surrounding noise of lighting and shades). As a result, it was found that there were all 20 experiment cases of accident detected and actual effective rate of accident detection amounted to 76.9% on average. In addition, the image processing rate ranged from 10~14 frame/sec depending on the area of detection region. Thus, it is concluded that there will be no problem in real-time image processing.

• Journal of the Korean Institute of Gas
• /
• v.14 no.6
• /
• pp.15-20
• /
• 2010

Compressed Natural Gas (CNG) buses have been supplied since the year 2000 in order to resolve severe atmospheric pollution in metropolitan area and contributed on the improvement of urban atmospheric environment. However, it is indispensible to take an adequate measure to guarantee the safety of CNG vehicles because of the possibility of huge fire accident. A receptacle, connecting device between high pressure fuel supply tank and fuel line, plays an important role in CNG supply system. In recent, leakage of CNG from receptacles has been reported. So, the concern about the security and reliability of receptacles has been arisen. Therefore, a lot of efforts to prevent leakage are invested among researchers and the durability of this component should be guaranteed despite repeated operation. This research has performed durability tests of a CNG receptacle regarding the repeated usage, extreme chattering, and continuous full flow test. Although a receptacle used for CNG vehicle satisfies validation requirements in the test results, it has been found that failure in the function of leakage prevention in a receptacle could take place in the case of prolonged exposure to high supply pressure in common quick charging environment on site.

• Journal of Veterinary Clinics
• /
• v.28 no.5
• /
• pp.473-478
• /
• 2011

The study evaluated the antioxidant effects of ascorbic acid (AA) against oxidative stress during laparotomy in dogs under general anesthesia using isoflurane. Twelve dogs were randomly assigned to either the ascorbic acid group (AAG) or the sham group (SG). AAG received intravenous dosage of 100 mg/animal of standard AA 10 minutes before anesthesia. Plasma levels of cortisol, glucose, total oxidant status (TOS), total antioxidant status (TAS), and oxidative stress index (OSI) were measured. Cortisol level increased significantly with time in both groups (p < 0.05). The change of glucose levels was not significantly different between both groups. TOS and OSI increased significantly with time in the SG (p < 0.05), whereas it did not significantly change with time in the AAG. The TOS and OSI of the AAG were significantly lower than in the SG (p < 0.05). However, TAS did not significantly change between both groups. The results suggest that the decrease of TOS in the AAG might be related to the conversion of antioxidants to oxidants. The decrease of OSI indicates that the decrease of reactive oxygen species (i.e., oxidative stress) produced at the site of injury is able to decrease surgical side effects of abnormal blood circulation, organ failure, and inflammation. Therefore, AA can be used to protect a surgical patient from oxidative stress in canine laparotomy.

• Journal of Korean Society of Forest Science
• /
• v.78 no.2
• /
• pp.228-241
• /
• 1989

The objectives of this study are to identify flood disasters resulted from heavy rainstorm including earth and stone-debris avalanches and also to develope the scientific data to be needed for establishing the landslide-related disaster prevention countermeasures. For this study, 5 Gun (district) regions including Booyeo, Seochun, Gongju, Boryung, and Chungyang in Chungchongnam-do of the central part of Korea, in which severe landslide damages have been triggered during 3 days from July 21 to July 23, 1987, were investigated. Mostly, landslides having death of human lives triggered from 6 a.m, to 8 a,m. on July 22, and the principal factor was proved to be the continuous heavy rain ; the continuous rainfall of internal region for 3 days measured about 300-673 mm. The structural measures for slope failure prevention countermeasures at the hollow part of upper hillslope should be required. Natural drainage network on slopes should not be disturbed in case of land use alteration, such as a chestnut planting work on hillslopes behind the houses particularly. There are so many problems in recognition of landslide disaster prevention countermeasures including evacuation exercises. More actual education of countermeasures for control of flood and landslide should be put to practice through "civil defense education" and "inhabitants' meeting." In this context, existing Erosion Control Stations of 13 regions established in each Province should not be reduced. The designation criterion and surveying processes of "Landslide Prone Site" published by Forest Administration should also be improved scientifically.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.12 no.2
• /
• pp.92-96
• /
• 2014

Dabigatran is the first oral direct thrombin inhibitor approved by the US Food and Drug Administration (FDA) for prevention of stroke and systemic embolism in patients with nonvalvular atrial fibrillation. Because dabigatran is excreted mainly by the kidneys, serum levels of dabigatran can be elevated to a supratherapeutic range in patients with renal failure, predisposing to emergent bleeding. We describe the case of a 66-year-old man taking dabigatran 150 mg twice daily for atrial fibrillation and cerebral infarction who presented with hematochezia and disseminated intravascular coagulation. Laboratory evaluation showed a hemoglobin level of 6.3 g/dL, platelets of $138,000/mm^3$, activated partial thromboplastin time (aPTT) of 10 s, and an international normalized ratio (INR) of 8.17. Colonoscopy showed a bleeding anal fissure. Hemostasis was provided by hemoclips and packed red blood cells and fresh frozen plasma were transfused. Since then, there was no further hematochezia, however, bleeding including oral mucosal bleeding, hematuria, and intravenous site bleeding persisted. At presentation, his serum creatinine was 4.96 mg/dL (baseline creatinine, 0.9 mg/dL). Dabigatran toxicity secondary to acute kidney injury was presumed. Because acute kidney injury of unknown cause was progressing after admission, he was treated with hemodialysis. Fresh frozen plasma transfusion was provided with hemodialysis. At 15 days from admission, there was no further bleeding, and laboratory values, including hemoglobin, partial thromboplastin time, and prothrombin time were normalized. He was discharged without bleeding. After 2 months, he undergoes dialysis three times per week and no recurrence of bleeding has been observed.

• Clean Technology
• /
• v.27 no.4
• /
• pp.297-305
• /
• 2021

In the domestic aluminum industry, the extrusion process is a major process accounting for more than 40% of the total production. However, most domestic aluminum extrusion companies produce aluminum using old equipment that is more than 30 years old. Extrusion press is when the equipment is not replaced before the wear and breakage of major parts occur, reducing productivity and increasing the defect rate compared to new equipment. The old extrusion press often loses part drawings, so it is difficult to repair them properly on-site and to remanufacture them due to the lack of technical skills for maintenance. Therefore, a systematic remanufacturing plan must be designed from dismantling the equipment. In this study, remanufacturing FMEA was devised to remanufacture old extrusion press. The risk priority was analyzed by considering the degree of damage to the recycled parts, the cycle due to breakage/damage during the extrusion process, and the value of recycling resources due to remanufacturing. To standardize the remanufacturing process, remanufactured FMEA was performed through part analysis according to the structural analysis of the extrusion press. In addition, remanufacturing priorities were selected for each part, while remanufacturing itself was studied for efficiency of resource circulation and product quality stabilization.