• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.709-718
• /
• 2017

The installation of the elevator ARD(Automatic Rescue Device) system has been forced into law in these days in order to safely rescue passengers during power failure. The configuration of the ARD system consists of energy storage device, power converter and control systems. The EDLC(Electric Double Layer Capacitor) are used as energy storage device for rapid charge/discharge purposes. The power conditioning system (PCS) consists of bi-directional converter, 3-phase converter and control system. The dead-beat control system is adopted for most systems however it requires complex mathematical calculations, the high performance microprocessors are mandatory and thus it can be a cause of high manufacturing cost. In this paper the new control method for average current mode control is presented for simple structure. The control algorithm is applied to the single phase system and then expands to three phase system to meet the sysem requirements. The mathematical modeling using average modeling method is presented and analysed by PSIM computer simulation to verifie the validity of the proposed control methods.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4D
• /
• pp.635-647
• /
• 2006

Korean construction companies first advanced to the international markets in 1960's and so far have brought more than 4,900 projects which account for 193 billion dollars approximately. With the large increase of national employment and income being followed by the achievement, Korea's construction industry has made an enormous contribution to the improvement of domestic economy for the last 40 years. However, recently the increased risk in international markets as well as the sharpening competition with foreign companies promising in terms of advanced technologies and low labor cost have been driving Korean construction away from the market shares. According to ENR (Engineering News Record, 1994~2003), it is revealed that 15.1% of top 225 global contractors are suffering from loss in international construction markets. This phenomenon is largely due to the highly uncertain characteristics of international projects, which are inherently exposed to various and complicated risky situations. Furthermore, especially for Korean construction companies, it is often the case that the failure in an international construction project cannot be offset by even a sufficient number of successful domestic achievements. Therefore, not only the selective screening among the nominated projects which have strong possibility of collapse but the systematic strategies for controlling potential risk factors are also considered indispensable in international construction portfolio management. The purpose of this study is to first analyze the causal relationships of the profit-influencing variables and the project success, and develop the profitability forecasting model in international construction projects.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.109-120
• /
• 2024

For successful waterproofing construction, it is very important to secure construction quality as well as material performance of waterproofing materials used in construction. Due to the long-term cost reduction policy following the economic downturn in the construction market, most construction companies are using general low-priced waterproof materials rather than high-quality waterproof materials without clear quality control standards. Without clear education on construction, construction is being carried out with meaning only on construction activities. In addition, the waterproofing method applied in combination is a situation where water leakage occurs due to waterproofing failure due to insufficient construction quality because the construction method is complicated. Therefore, it is necessary to review the quality control measures(design, materials, construction) for successful waterproofing work and improve problems that are derived so that stable waterproofing work can be done. In order to expect the leakage prevention effect of a building, first, it is required to select appropriate materials for each part of the building and environment in the design stage, and the selected materials must satisfy all items of the Korean Industrial Standard(KS). Second, to secure the quality of waterproofing construction, sincere construction by workers is required. In this paper, we tried to describe "review of waterproof design", "constructor education", "site inspection", and "criticism(correction/supplementation)" as quality control measures after material selection.

• Journal of Chest Surgery
• /
• v.36 no.9
• /
• pp.646-650
• /
• 2003

Many surgical techniques for ischemic mitral regurgitation (IMR) have been used with their excellent results and advantages. Here, we report our simple posterior annuloplasty techniques using vascular graft strip with their early results. Material and Method: Twenty two patients (13 male) underwent the operations for IMR (excluding the papillary muscle rupture) from December 2001 to January 2003. Preoperative risk factors were low ejection fraction (<35％, n=9), hypertension (n=13), diabetes (n=9), and renal failure (Cr>2.5, n=4). The wide dissection beneath the both vena cavae and interatrial groove after bicaval cannulation enabled the easy exposure of mitral valve even in the small left atrium. After eight or nine interrupted sutures in posterior annulus for anchoring the 6 mm width vascular graft strip, symmetric (n=8) or asymmetric (n=14) annuloplasty were done. Combined surgeries were CABG (n=21), Dor procedures (n=3), tricuspid valve annuloplasty (n=1), Maze operation (n=1), and aorto-right subclavian artery bypass (n=1). Result: Except for one surgical mortality, all the patients were doing well and the mean grade of regurgitation was decreased from 2.95 to 0.88, however the ejection fraction had not changed significantly just before discharge. Post-operative valve function evaluated before discharge revealed no residual regurgitation in 8 (including 1 patient with mild stenosis due to over reduction), minimal in 11, mild in 2, and mild to moderate regurgitation in 1. One patient who had ischemic cardiomyopathy and renal failure died of the arrhythmia during the hemodialysis. Conclusion: These observations suggest that the annuloplasty with vascular graft strip could be a safe and cost effective techniques for ischemic mitral regurgitation. However, the long term evaluation for the mitral valve function should be defined for the final conclusion.

• Weed & Turfgrass Science
• /
• v.7 no.3
• /
• pp.275-282
• /
• 2018

Miscanthus species are known as a genus of eco-friendly and low-maintenance cost ornamental grasses. Plug and cutting methods were tested for multi-propagation of most promising ornamental Miscanthus species in greenhouse and field plot. The plug formation period with three different cell sizes with four cultivars (M. sinensis 'Andersson', 'Strictus', 'Gracillimus', 'Variegatus') were evaluated the seedling development stages with two irrigation types of the over-head and the bottom watering in greenhouse and field plot afterward during 2015-2016 season. In seedling plug test, the size of tray cell affected the plug formation. Bottom irrigation resulted positively on plant height, weight, root and tiller development compared with the over-head irrigation. Plug cell size affected the plant growth in the field after transplanting. All of the 3 Miscanthus species showed higher rates of successful propagation at the lower nodes before inflorescence formation (vegetative growth stage). To analyze the survival factors of M. xgiganteus cutting, the cutting time, node part, and culm diameter were tested as independent variables with the binary logistic model. The survival probability was influenced by node part and culm diameter significantly. The third and fifth node parts showed 0.12 (8X higher failure probability) and 0.02 (50X higher failure probability) times less survival probability. It means the survival probability will be increased by using older and lower part of cuttings during a vegetative growth stage before inflorescences of M. xgiganteus.

• Clinical and Experimental Pediatrics
• /
• v.51 no.11
• /
• pp.1165-1171
• /
• 2008

Purpose : This study aimed to identify the true extent of non-responsiveness in full-term infants born from HBsAg-negative or HBsAg-positive mothers and vaccinated against hepatitis B virus (HBV) at 0, 1, and 6 months of age and to evaluate the effect of revaccination among non-responders. Methods : The study included 716 full-term infants born in 2004-2007. Of 716, 662 infants (A group) were born to HBsAg-negative mothers and 54 infants (B group: 50, except HBsAg-positive infants) were born to HBsAg-positive mothers. All infants were administered DNA recombinant vaccines at 0, 1, and 6 months of age. B group infants received hepatitis B immunoglobulin at birth. Anti-HBs titers were tested at 7-12 and 9-15 months in A and B groups, respectively. Three revaccination doses were administered to non-responders whose anti-HBs titers were under 10 mIU/ml; revaccinated infants were retested at 1-3 months after last vaccination. The association between HBeAg seropositivity of mother and the failure of HBV immunoprophylaxis was evaluated. Results : The seroconversion rates after primary hepatitis B vaccination were higher in A group (94.1%) than in B group (78%, P<0.001). The seroconversion rates were high in revaccinated infants (A group non-responders: 96.9%, B group non-responders: 87.5%). The failure of HBV immunoprophylaxis was significantly associated with maternal HBeAg seropositivity (P<0.001). Conclusion : The seroconversion rates after primary hepatitis B vaccination were low in B group infants. Revaccination of non-responders in B group was very effective. Therefore, anti-HBs testing and revaccination of B group is very important. Revaccination of non-responders in A group was also very effective. Thus, testing the immune status of infants born to HBsAg-negative mothers even after primary hepatitis B vaccination should be considered. However, to realize this, further studies on the cost-effectiveness of anti-HBs testing in healthy full-term infants are necessary.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.4
• /
• pp.50-58
• /
• 2014

Due to the cost burden of new construction, the necessity of repair and retrofitting of aged structures is sharply increasing as the domain of repair and retrofitting construction is expanding. Because of the necessity, new technologies for repair and retrofitting are continuously studied in Korea and foreign countries. Steel adhesive method, fiber reinforced plastic (FRP) surface adhesive method, and external prestressing method are used to perform the repair and retrofitting works in Korea. In order to consider a repair method using steel mesh reinforced cement mortar (SMCM), 3-point flexural member test was conducted considering repair area and layer number of SMCM. Five types of specimens including ordinary reinforced concrete (RC) specimen with dimensions of $1400{\times}500{\times}200$ (mm) were cast for testing the deflection measurement, a LVDT was installed at the top center of the specimens. Also, a steel strain gauge and a concrete strain gauge were placed at the center of the specimens. A steel strain gauge was also installed on the shear reinforcement. The 3 point flexural member test results showed that the maximum load of SMCM reinforced specimen was higher than that of basic RC specimen in all of the load-displacement curves. Also, the results showed that, when the whole lower part of the basic RC specimen was reinforced, the maximum load and strain were 1.18 and 1.37 times higher than that of the basic RC specimen, respectively. Each specimen showed a slightly different failure behavior where the difference of the results was caused by the difference in the adhesive level between SMCM and RC. Particularly, in SM-B1 specimen, SMCM spalled off during the experiment. This failure behavior showed that the adhesive performance for RC must be improved in order to utilize SMCM as repair and retrofitting material.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.23 no.1
• /
• pp.34-40
• /
• 2014

There are several treatment options for rehabilitation of partial edentulism including the use of conventional or implant-retained fixed prostheses. However, such prosthetic options cannot always be possible because of compromised general and oral health (i.e. loss of supporting tissues, medical reasons, extensive surgical protocol and osseointegration failure of dental implant) as well as the affordability of patients. In some cases, removable partial denture provides easier access for oral hygiene procedures and the ability to correct discrepancies in dental arch relationships than implant fixed prosthesis. Recently, Implant Supported Removable Partial Denture (ISRPD) where to place dental implant in strategic position has been suggested to improve the limitation and shortcomings of conventional RPD. ISPRD can overcome mechanical limition of conventional RPD by placing implant in a favorable position and can be cost-effective, prosthetic solution for partially edentulous patients who are not immediate candidates for extensive, fixed implant supported restorations. Incorporation of dental implants to improve the RPD support and retention and to enhance patient acceptance should be considered when treatment planning for RPD. In this case, 59 years old male patient who received dental treatment of implant fixed prosthesis on both side of the upper jaw and implant overdenture on lower jaw showed implant abutment screw fracture on #15i and osseointegration failure on multiple number of implants. After removing failed implants, we planned ISRPD using #15i,24i,25i,26i and #23 natural tooth for RPD abutment. We fabricated #23 surveyed crown,#24i=25i=26i surveyed bridge and #15i gold coping for support,retention and stability for RPD. Periodic follow up check for 2years has been performed since the ISRPD delivery to the patient. No sign of screw loosening, fracture or bone resorption around abutment implants were detected.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.177-190
• /
• 2021

Due to the development of the fourth industrial revolution technology, efforts are being made to improve areas that humans cannot handle by utilizing artificial intelligence techniques such as machine learning. Although on-demand production companies also want to reduce corporate risks such as delays in delivery by predicting total production time for orders, they are having difficulty predicting this because the total production time is all different for each order. The Theory of Constraints (TOC) theory was developed to find the least efficient areas to increase order throughput and reduce order total cost, but failed to provide a forecast of total production time. Order production varies from order to order due to various customer needs, so the total production time of individual orders can be measured postmortem, but it is difficult to predict in advance. The total measured production time of existing orders is also different, which has limitations that cannot be used as standard time. As a result, experienced managers rely on persimmons rather than on the use of the system, while inexperienced managers use simple management indicators (e.g., 60 days total production time for raw materials, 90 days total production time for steel plates, etc.). Too fast work instructions based on imperfections or indicators cause congestion, which leads to productivity degradation, and too late leads to increased production costs or failure to meet delivery dates due to emergency processing. Failure to meet the deadline will result in compensation for delayed compensation or adversely affect business and collection sectors. In this study, to address these problems, an entity that operates an order production system seeks to find a machine learning model that estimates the total production time of new orders. It uses orders, production, and process performance for materials used for machine learning. We compared and analyzed OLS, GLM Gamma, Extra Trees, and Random Forest algorithms as the best algorithms for estimating total production time and present the results.

• Clinical and Experimental Pediatrics
• /
• v.51 no.9
• /
• pp.956-963
• /
• 2008

Purpose : Indomethacin is widely used for the prophylaxis and treatment of patent ductus arteriosus (PDA); however, it is associated with side effects such as renal failure, intraventricular hemorrhage, and gastrointestinal bleeding. Intravenous ibuprofen has been shown to be as effective as indomethacin in prompting PDA closure. If treatment with oral ibuprofen is as effective as indomethacin, it would have the advantages of greater availability, simpler administration, and lower cost. We conducted this study to compare the efficacy and side effects of indomethacin with those of oral ibuprofen, vis-$\grave{a}$-vis on the pharmacological closure of PDA. Methods : As a randomized double-blind study, 34 preterm infants with respiratory distress syndrome and hemodynamically significant PDA were treated with either intravenous indomethacin or oral ibuprofen. Echocardiography was performed by one cardiologist who was blind to the treatment that any given infant received. The rate of ductal closure, the need for additional drug treatment or surgical ligation, clinical outcome, and the side effects of drug treatment were compared. Results : Ductal closure occurred in 16 of 18 patients (88.9%) from the indomethacin group and in 14 of 16 patients (87.5%) from the ibuprofen group (P>0.05). Three patients in the indomethacin group and four in the ibuprofen group required a second drug treatment (P>0.05). Three patients (i.e., one patient in the indomethacin group and two in the ibuprofen group) underwent surgical ligation (P>0.05). Between the two groups, there was no significant difference vis-$\grave{a}$-vis in side effects or clinical outcome. Conclusion : Compared to indomethacin, oral ibuprofen has the advantages of simpler administration and lower cost, while being as effective; in addition, there are no differences between the two drug treatments with regards to side effects or clinical outcomes. Therefore, the widespread use of oral ibuprofen should be considered in treating PDA in preterm infants.