• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.75-86
• /
• 1991

본 논문에서는 지반공학 소식 창간호에 게제된 Carsington 댐의 파괴에 관하여 고찰하였으며, 해석 결과에 근거하여 댐 파괴요인과 그 영향에 관하여 논술하였다. 본 해석에서는 파괴후의 현장조사에서 나타난 황색점토층 내에 이미 존재하던 전단변위에 대한 영향과 이 연약점토층을 통과하는 파괴면의 진행성 파괴상황을 중점적으로 분석하였다. 가능한 현장조건을 대표하는 수치로 변화시켜 각 조건별 안전도 계산치를 비교하고, 댐 파괴시의 평균강도를 가장 잘 대표하는 현장 지반조건을 평가하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권1호
• /
• pp.15-19
• /
• 2001

Current leakage is the major failure mode of semiconductor device characteristic failures. Conventionally, failures such as short circuit breaks and gate breakdowns have been analyzed and the detected causes have been reflected in the fabrication process. By using a wafer-level emission-leakage failure analysis method (in-line QC), we analyzed leakage mode failure, which is the major failure detected during the probe inspection process for LSIs, typically DRAMs and CMOS logic LSIs. We have thus developed a new technique that copes with the critical structural failures and random failures that directly affect probe yields.

• 대한한의학회지
• /
• 제21권4호
• /
• pp.276-285
• /
• 2000

Paraquat is a very potent herbicide which causes fatal toxicity when ingested, and there is no specific antidote against it. Human ingestion induces acute renal failure, hepatic dysfunction and progressive respiratory failure with high mortality rate. Clinical investigation and medical treatment were done on two cases of acute renal failure caused by paraquat poisoning admitted to the Department of Internal Medicine, Wonkwang University Oriental Chonju Medical Hospital. We report two cases of patients who survived after acute paraquat intoxication, by means of oriental medicine such as Gamdutang, a typical antidote of toxins, chinese ink as an absorbent and burned powder of Rhei Radix et Rhizoma for laxative and so on, western medicine such as gastric lavage, diuretics and fluid therapy. We suggest more experiments and studies related to such treatment for paraquat poisoning be conducted.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권3호
• /
• pp.177-186
• /
• 2012

This paper presents a comparison of the failure mechanism for high power converted white LEDs(3W) with the commercially available YAG:Ce and silicate phosphor. We carry out the normal aging life test for 10,000 hours, the high temperature aging test for 8,000 hours, the high temperature and humidity aging test for 8,000 hours and the current aging testing for 5,000 hours. The optical and electrical parameters of LEDs were monitored, such as lumen, correlated color temperature (CCT), chromaticity coordinates(x, y), thermal resistance, I -V curve and spectrum intensity. The stress induced a luminous flux decay on LED in all experiments and causes a failure. So we try to find out what's a main failure mechanism for a high power LED.

• 한국경영과학회지
• /
• 제27권3호
• /
• pp.115-133
• /
• 2002

In this paper, 15 South Korean telecommunications service failure cases were analyzed. Through the in-depth case study, 8 factors were found to be the major causes contributing to the telecommunications service failure. They were (1) ineffective marketing, (2) poor demand forecasting due to misjudgment of customer preference, (3) failure to satisfy technical specifications, (4) loss of cost advantage due to the price cut of competing services or new entry with lower price, (5) loss of utility advantage due to the increased utility of competing services or new entry with higher utility (6) decrease of market attractiveness due to change of customer preference, (7) impact of government policy, and (8) insufficient or low quality of contents. Additional analysis was done to derive managerial implications to the new telecommunications service development strategy. The findings from the paper will provide valuable Insight to the successful Implementation of new service development and service provisioning processes.

• 시스템엔지니어링학술지
• /
• 제12권1호
• /
• pp.105-112
• /
• 2016

An aircraft must be designed to minimize system failure rate for obtaining the aircraft safety, because the aircraft system failure causes a fatal accident. The safety of the aircraft system can be predicted by analyzing availability, reliability, and maintainability of the system. In this study, the reliability and the maintainability of the hydraulic system are analysed except the availability, and therefore the reliability and the maintainability analysis process and the results are presented for a helicopter hydraulic system. For prediction of the system reliability, the failure rate model presented in MIL-HDBK-217F is used, and MTBF is calculated by using the Part Stress Analysis Prediction and quality/temperature/environmental factors described in NPRD-95 and MIL-HDBK-338B. The maintainability is predicted by FMECA(Failure Mode, Effect & Criticality Analysis) based on MIL-STD-1629A.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.617-621
• /
• 2003

The purpose of this paper is to analyze piping failure trend of safety pipings In domestic nuclear power plants. First, database for the piping failure was constructed with 105 data fields. The database includes plant population data, event data, and service history data. 7 kinds of piping failures in domestic NPPs were investigated. Among the 7 cases, detailed root causes were investigated for 3 cases. The first one is pipe wall thinning in main feedwater pipings of Westinghouse 3 loop type plants. The root cause of the wall thinning was flow accelerated corrosion near welding area. The next one is leak event in chemical and volume control system(CVCS) due to vibration. Some cracks occurred in socket welding area. The events showed that the integrity or socket weld is very vulnerable to vibration. The last one is also a leak event in primary sampling line in Korean standard reactor due to thermal fatigue. Although the structural integrity was not maintained by the events, there was no effect on nuclear safety in the above 3 piping failure eases.

• Journal of Chest Surgery
• /
• 제22권1호
• /
• pp.50-58
• /
• 1989

The emergence and expansion of cardiac surgery over the past decade has resulted in an increasing number of patients undergoing cardiac operations but many kinds of heart surgery was realized only palliative, resulting in increasing numbers of secondary cardiac procedures. From 1978 to 1988, 10 cases of various congenital heart diseases and 17 cases of acquired heart diseases were reoperated at Hanyang University Hospital. The leading indication of second operation was residual shunt or valvular malfunction due to technical failure in congenital heart disease and primary valve failure, endocarditis, paravalvular leakage were for acquired heart disease. The mortality of reoperation was 0% for congenital heart disease and 11.7%[2 death among the 17 patients] for acquired heart disease. The leading causes of death were myocardial failure, sepsis with endocarditis, acute renal failure and congestive heart failure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.147-152
• /
• 2000

The ASF(Automatic Sheets Feeders) part of the printer has many bosses supporting gear-trains. Steel-pin bosses are substituted for plastic mold bosses because of advantages such as cost reduction, convenience of manufacturing and accuracy in dimension, but they have a weak point such as fatigue fracture due to low material strength, which causes a serious problem in the reliability of product. To prevent the fatigue fracture of bosses, we should exactly estimate the life to failure of the various shapes of bosses. We take the linear FEM analysis and the statistical method in this paper to figure out the life to failure of bosses. The maximum stress and life to failure of bosses can be easily estimated by this method. This paper specifies how to figure out the life to failure of bosses.

• 열처리공학회지
• /
• 제27권4호
• /
• pp.191-201
• /
• 2014

The gear was made of SNC815 case-carburized, quench hardened and tempered steel. The gears were failed far earlier than the expected service life used in the industrial site. Causes of the failed gear were analyzed by microstructure observation. By the SEM and micro structure examinations, the damaged surfaces had been weared and failed by fatigue. Through microscope observation on the damaged surface, it was found that the cause of failure was determined by external overloading and the initial stage of the damage was closely related to complex contact fatigue failure. The overload and contact fatigue contributed to the early failure cause.