• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.13-29
• /
• 2016

In this study, we analyzed the causes of major faults in the biogas plant through the case of gas engine failure when cogenerating electricity and heat using biogas as a fuel in the actual sewage treatment plant and suggested countermeasures. Hydrogen sulfide in the biogas entering the biogas engine and water caused by intermittent malfunction of the water removal system caused intercooler corrosion in the biogas engine. In addition, the siloxane in the biogas forms a silicate compound with silicon dioxide, which causes scratches and wear of the piston surface and the inner wall of the cylinder liner. The substances attached to the combustion chamber and the exhaust system were analyzed to be combined with hydrogen sulfide and other impurities. It is believed that hydrogen sulfide was supplied to the desulfurization plant for a long period of time because of the high content of hydrogen sulfide (more than 50ppm) in the biogas and the hydrogen sulfide was introduced into the engine due to the decrease of the removal efficiency due to the breakthrough point of the activated carbon in the desulfurization plant. In addition, the hydrogen sulfide degrades the function of the activated carbon for siloxane removal of the adsorption column, which is considered to be caused by the introduction of unremoved siloxane waste into the engine, resulting in various types of engine failure. Therefore, hydrogen sulfide, siloxane, and water can be regarded as the main causes of the failure of the biogas engine. Among them, hydrogen sulfide reacts with other materials causing failure and can be regarded as a substance having a great influence on the pretreatment process. As a result, optimization of $H_2S$ removal method seems to be an essential measure for stable operation of the biogas engine.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.6
• /
• pp.2026-2036
• /
• 1991

An expert system is developed which can diagnose the causes and remedies of the failures of power transmission gears. The basic components of the expert system are knowledge base, inference engine, and working memory. The knowledges in knowledge base are classified into the knowledges for determining the failure types and for diagnosis of causes and remedies of the failures. The former is represented hierarchically into the main category of eleven groups by rules and the sub category of twenty four groups by facts, while the later is represented by facts according to the each group of knowledges. In the inference engine some considerations are implemented, i.e., the backward chaining method and depth first search to determine the category of the failures, the meta-knowledges to shorten the search space, the certainty factor to evaluate the reliability of result, and the unification strategy to diagnose the causes and remedies of the failures. The working memory is established to hold the results during inference temporarily. In addition, knowledge acquisition facility, explanation facility, and user interface are included for the usefulness of user. This expert system is written with the PROLOG programming language on IBM-PC compatible computer operated by MS-DOS and be executed alone.

• Journal of environmental and Sanitary engineering
• /
• v.8 no.2
• /
• pp.49-64
• /
• 1993

The present waste problems require a change of thinking with regard to conventional economics. It has been generally believed that competitive markets maximize social welfare. But, the other hand, a few economists argue that "the competitive markets cannot always be relied on to provide all goods in the efficient amount." One of the best examples of the latter contention is the environmental problem. What is the basic thinking of the conventional economics that causes this problems \ulcorner What is the present problem that requires the change of conventional economic thinking \ulcorner The environmental problem result from the conventional economic thinking such as pursuing the limitless of the Gross National Product(GNP), believing the increasing returns in economics of scale and the efficiency of competitive market. This economic principles, howe- ver, does not apply currently to public goods, especially environmental amenity and natural resource because the price of markets does not reflect the natural goods of services. We call this eternality. Externalizes are no considered by either buyers or sellers of goods of which production or use results in an eternality. This leads to market failure are causes an waste problem in the economic activities. Today, it is almost impossible to say in a word what the solution for waste problems is because they are by-products complicated and entangled human activities. In this paper, I have introduced the causes of environmental problems only from the economic point of view. I have also described the needs of conversion of conventional economic thinking. Firstly, sustainable development, maintaining the natural resources, should be the basis of the economic growth rather that pursuing the limitless growth of GNP. Secondly, an appropriate scale of human's production activity should be taken into account to reduce the impact to the natural environment. Thirdly, internalization of eternality is asked to correct the market failure. This requires the public policy such as imposing a talsubsidy, assigning a property right or implement a more detailed environmental quality standard through, because use of the natural resources can be. allocated optimally by the intervention of government or social associations.

• Journal of the Korean GEO-environmental Society
• /
• v.5 no.4
• /
• pp.47-56
• /
• 2004

This research analyzed about various landslide causes and resettled items, which are fit to environment of army facilities, of safe estimating table of Korea Institute of Construction technology through the spot inspection data. Analyzed relation with rainfall and slope failure occurrence for forecast slope failure appearance. Analyzed special quality of rainfall, topography, geological features that become occurrence factor of slope failure that happen in Kang-Won area come up with use of slope failure safety estimating table. Wish to examine closely phenomenon of slope failure and regional special quality that appear in military bases area and consider countermeasure.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.6
• /
• pp.719-726
• /
• 2009

A delay system in fuze for high explosive shell is an important safety device, but failure in the delay system usually causes failure of the shell. Root-cause analysis of failure in the delay system is required since failure in over 10-years stored delay system recently occurs. In this paper, failure in the delay system was reproduced experimentally to examine aged characteristics of the delay system, and the failed delay system shows the same characteristics as ones of failed delay systems in field. Based on the reproduced experiments, accelerated life testings and the data analysis of failure times of delay systems were performed to predict the storage lifetime.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.9
• /
• pp.2969-2979
• /
• 2000

A mobile host has failure causes such as failure of the mobile host, disconnection of the mobile host, and wireless link failure that have not been seen in traditional computing environments. So far there have been few studies on fault tolerance of a mobile host in mobile computing environments. The Lazy scheme, a failure recovery technique of the mobile host, is a cost-effective one. However, this scheme has a defect that the mobile host cannot be recovered from failure of the base station with acheckpoint of the mobile host. In this paper, we propose and evaluate the Redundant Lazy scheme for performance improvement of the Lazy scheme.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.2 no.3
• /
• pp.13-24
• /
• 2000

The collapse shapes and causes of tunnel in the highway were analyzed and reinforced methods of tunnel were investigated in the paper. Collapse shapes of tunnel are divided into three types such as subsurface failure, small scale wedge failure and slickenside strata failure. These three shapes consist of 35%, 50%, and 15%, respectively. The 85% of collapse was located near the entrance and exit of tunnel. The 15% was located at the intersection of emergency laybys. When tunnel collapses are analyzed by the failure concept, sliding failure amounts to more than 83%.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5200-5222
• /
• 2017

The separation of control plane and data plane in Software Defined Network (SDN) makes it flexible to control the network behavior, while also causes some inconveniences to the link failure recovery due to the delay between fail point and the controller. To avoid delay and packet loss, pre-defined backup paths are used to reroute the disrupted flows when failure occurs. However, it may introduce large overhead to build and maintain these backup paths and is hard to dynamically construct backup paths according to the network status so as to avoid congestion during rerouting process. In order to realize congestion aware fast link failure recovery, this paper proposes a novel method which installs multi backup paths for every link via source routing and per-hop-tags and spread flows into different paths at fail point to avoid congestion. We carry out experiments and simulations to evaluate the performance of the method and the results demonstrate that our method can achieve congestion aware fast link failure recovery in SDN with a very low overhead.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.660-670
• /
• 2009

Neighboring construction becomes mainstream of Ground excavation in downtown area. This causes the displacement, deformation, stress condition, etc of the ground surroundings. Therefore Neighboring construction have an effect on Neighboring structure. All these years a lot of Neighboring construction carried out, and the accumulation of technology also get accomplished. But earth retaining structure collapse happens yet. Types of earth retaining structure collapse are 12. 1. Failure of anchor or strut system, 2. Insufficiency of penetration, 3. H-pile Failure on excessive bending moment, 4. Slope sliding failure, 5. Excessive settlement of the back, 6. Deflection of H-pile, 7. Joint failure of coupled H-pile, 8. Rock failure when H-pile penetration is rock mass, 9. Plane arrangement of support systems are mechanically weak, 10. Boiling, 11. Heaving, 12. Over excavation. But field collapses are difficult for classification according to the type, because collapse process are complex with various types. When we consider the 12 collapse field, insufficient recognition of ground condition is 4 case. Thorough construction management prevents from fault construction. For limitations of soil survey, It is difficult to estimate ground condition exactly. Therefore, it should estimate the safety of earth retaining system, plan for necessary reinforcement, according to measurement and observation continuously.

• Journal of Korean Society for Quality Management
• /
• v.47 no.3
• /
• pp.641-659
• /
• 2019

Purpose: Recently, the managing customer complaints properly has emerged as key source of competitive advantage in the large distribution industry. Effective customer complaint management helps firms minimize service failures and incense the capability to respond to customer's needs. Despite this importance, the in-depth prior study of a firm's service failures is very limited. Therefore, the actual service failure cases of large discount stores in Korea were analyzed in this study, and the types of service failures that occur at the service interface were identified. Method: Specifically, a total of 48,307 cases of customer complaints that have occurred in the past three years were collected from 1 January 2016 to 31 December 2018. Using 7 dimensions of service marketing mix. we have classified and analyzed systematically the service failure cases collected. Results: Among the cases of service failures, 34,921 (72.3%) cases were involved with the product factor, followed by 6,152 (12.7%) cases with person factor and 5,392 (11.2%) cases with process factor. Conclusion: By linking the main causes of service failure with the service marketing mix variables, this research presented a more systematic analytic model and verified by applying it to large domestic distribution company. Understanding the main factors affecting customer complaints n the large distribution industry can provide managers useful information and insight who want to achieve an effective customer complaint management.