• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.11
• /
• pp.1078-1087
• /
• 2014

In the conventional centralized mobility management schemes, it can lead to single points of failure, occurrence of a bottleneck, since all data and control are concentrated on the mobility anchor which is located in home network. In the current research of distributed mobility management, it is doing research into distributed mobility management which is supported by distributed mobility anchors. Such schemes do not consider a failure of the mobility anchor. However, it could be an issue under tactical environment since it occur non-service problem due to anchor movement, maintenance, failure, etc. In this paper, we proposed new DMM scheme named T-DMM(Tactical-Distributed Mobility Management) which can support handover even if mobility anchor breaks down. From the numerical analysis, we evaluate signaling cost and handover latency.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.1
• /
• pp.9-14
• /
• 2022

Social infrastructure facilities such as production, transportation, gas and electricity facilities may experience poor performance depending on time, load, temperature, etc. and may require maintenance, repair and management as they are used. In particular, in the case of transformers, the process of managing them for the purpose of preventing them from failing is necessary because a failure can cause enormous social damage. The management of transformers should consider both technical and economic aspects and strategic aspects at the same time. Thus, it applies the Asset Management concept, which is widely used in the financial industry as an advanced method of transformer management techniques worldwide. In this paper, the operation and power outage data were secured for the asset management of the transformer for distribution, and the asset status was analyzed. Analysis of asset status using actual operation and power outage data is essential for assessing the statistical life and failure rate of the facility. Through this paper, the status of transformer assets for arbitrary A group distribution was analyzed, and the end of life and replacement life were calculated.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.2
• /
• pp.1-10
• /
• 2013

In this paper, make a study decision problem called an optimal release policies after testing a software system in development phase and transfer it to the user. In the course of correcting or modifying the software, finite failure non-homogeneous Poisson process model, presented and was proposed release policies of the life distribution, half-logistic and log-logistic distributions model which used to an area of reliability because of various shape and scale parameter. In this paper, discuss optimal software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement. In a numerical example, the parameter estimation using maximum likelihood estimation of failure time data make out, and software optimal release time was estimated.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.7-13
• /
• 2011

RAMS is the procedure to maximize the reliability and availability of systems with managing operation rate, the frequency of failure in the system and repair method. Recently, all system life-cycle focusing on RAMS process has been rapidly developing in the field of railway vehicles, for example, applying th reliability management techniques for procurement and disposal of EMU. In particular, global economic recession require to reasonable measures for the EMU maintenance costs under the circumstances therefore, an alternative solution based on RCM(Reliability Centered Maintenance) which is the optimal maintenance method is interested. In this study, the state of being critical of each component and a primary factors was analyzed to improve VVVF inverter of the line 7 EMU by applying FMECA process. Furthermore, this paper showed the impact of connecting between the main and sub system. Based on these data, critical components according to malfunction ratings were classified by screening measures and improvements for each components was summarized.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.55-67
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used generalized gamma type distribution which has the efficient various property because of various shape and scale parameter. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.3
• /
• pp.9-17
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used superposition which has various intensity, if the system is complicated. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time. Through this study, in terms of superposition model and simply model, the optimal time to using superposition model release the software developer to determine how much could count will help.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.2
• /
• pp.183-191
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used mixture which has various intensity, if the system is complicated. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.1
• /
• pp.78-90
• /
• 2009

Recently, operation of highway is the complex digital Infrastructure based on complicated IT. The application of IT is increasing more and more in digital Infrastructure. Though IT is very convenient, if unpredicted operating risk of highway occurs, widespread damage can be large. When operating risk of highway occurs, road users are out of smoothly-run service because of the operating interruption. This risk causes unpredicted operating management cost and additional maintenance cost. It will excess over the planned operating cost, which may leads to users's unsafety and operator's insolvency because of income loss. Until now, related studies to find out the risk are not sufficient. The purpose of this study is to suggest risk cost items and to estimate the reasonable risk cost by using simulation method in case of occurring the huge power failure at the operating digitalized highway. This study indicates the several plans to hedge against risk cost and the management of highway project. From now on, it will be used as basic data to confirm the soundness of operating system in Digital Infrastructure.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.3
• /
• pp.92-98
• /
• 2017

The rapid growth of engineering technology and the emergence of systemized and large-scale engineering systems have resulted in complexity and uncertainty throughout the lifecycle activities of engineering systems. This complex and large-scale engineering system consists of numerous components, but system failure can be caused by failure of any one of a number of components. There is a real difficulty in managing such a complex and large-scale system as a part. In order to efficiently manage the system and have high reliability, it is necessary to structure a system with a complex structure as a sub-system. Also, in the case of a system in which cause of failures exist at the same time, it is required to identify the correlation of the components lifetime and utilize it for the design policy or maintenance activities of the system. Competitive risk theory has been used as a theory based on this concept. In this study, we apply the competitive risk theory to the models with combined structure of series and parallel which is the basic structure of most complex engineering systems. We construct a competing risks model and propose a mathematical model of net lifetime and crude lifetime for each cause of failure, assuming that the components consisting a parallel system are mutually dependent. In addition, based on the constructed model, the correlation of cause of failure is mathematically analyzed and the hazard function is derived by dividing into net lifetime and crude lifetime.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.11
• /
• pp.1605-1611
• /
• 2017

In this study, the characteristic lifetime of power facilities such as power transformers and GIS were investigated as the basis of power facility asset management. It is difficult to obtain the operation and failure data of the facilities in Korea. Therefore, the number of failures of the electric power facilities was calculated from the operation data and hazard rate shown in the overseas literatures, and the statistical analysis was performed using the Weibull distribution function. As a result of extracting and analyzing the data of the UK National Grid for power transformers, the characteristic lifetime (scale parameter) of 116.45 years was considered to be a very appropriate value for power transformer management and can be used as a comparative data of the analysis of the domestic transformers. As for the GIS, based on the Bays and Bay-Years data and the hazard rate according to the operation years of the 123kV GIS in Germany, it is found out that the characteristic lifetime of GIS is not so meaningful. It is necessary to decide a maintenance strategy and lifetime expectancy considering the characteristics of the design, materials and manufacturing process of GIS.