• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.207-212
• /
• 2001

The aim of this study is to present a practical and simple method for decision of ultimate failure mode of high-strength concrete beam members, based on interaction between shear strength and displacement ductility. Four tests were conducted on full-scale beam specimens having concrete compressive strength of 410kgf/$cm^{2}$. Prediction of failure mode from presented method and comparison with test results are also presented

• 전기학회논문지
• /
• 제59권3호
• /
• pp.575-580
• /
• 2010

This paper is to design an optimum power conversion device for the system required for development of a low cost 3-phase power inverter. For this purpose, in order to meet with endurance required by the industry, failure mode is standardized to guarantee lifetime of a power semiconductor by monitoring real time power loss and to facilitate failure mode analysis. As normality of heat loss of a power semiconductor is identified remaining in a certain range by comparing heat rise slope between that is calculated by using average current or average loss and that is measured at a heat sink, its feasibility is confirmed by experiment.

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.159-169
• /
• 2017

This study aims to the increasing the reliability of gun firing system of patrol killer guided missile from failure mode analysis. In order to find out the breakdown parameter, the examination process of the sources of the problems and the quality improvement activities are analyzed with performance testing data. From this study, the rate of operation and the reliability of 76 mm naval guns will be increase. And the result of the study is expected to be used as a reference data in the naval gun firing system for another failure mode analysis.

• 한국수자원학회논문집
• /
• 제43권11호
• /
• pp.967-976
• /
• 2010

우수관의 성능이 한계상태(performance limit state)에 도달할 확률을 정량적으로 산정할 수 있는 FORM(First-Order Reliability Model)의 AFDA(Approximate Full Distribution Approach) 신뢰성 모형을 개발하였다. 우수관망에서 각각의 관으로 유입하는 유량이 그 관의 허용 가능 배출량을 초과하여 성능한계상태에 도달할 때 이를 파괴상태(failure state)라 정의하여 신뢰함수를 수립하였다. 우수관거로의 유입량은 합리식, 유출량은 Manning의 공식을 적용하였다. 또한 신뢰성 해석을 위한 관련 확률변수들에 대한 통계적 특성과 분포함수에 대한 해석이 수행되었다. 강우자료의 불확실성 해석에서 우리나라 여러 중소도시에 대한 연 최대강우강도의 확률분포가 Gumbel 극치분포함수와 일치함을 확인하였다. 개발된 신뢰성 모형을 Y자형 우수관망에 적용하여 성능한계상태가 발생할 확률, 즉 파괴확률(probability of failure)을 정량적으로 산정하였다. Manning의 공식을 이용하여 우수관의 직경 변화에 따른 파괴확률의 거동특성을 분석하였다. 특히 문경과 대전의 50년 재현기간을 갖는 설계 강우강도에 대한 우수관의 파괴확률을 산정한 결과에 의하면, 관의 직경이 특정수치 이하일 경우 파괴확률이 급격히 커지는 것을 확인할 수 있었다. 이는 실제 우수관의 유효직경이 설계직경에 가깝도록 항상 관내 불순물을 제거하는 것이 파괴확률을 줄이는 최선의 방법임을 의미하는 것이다. 또한 우수관 시스템의 경우 여러 개의 관이 모여 하나의 관으로 흘러 들어가는 경우가 많으며 이 경우 다중파괴유형(multiple failure mode)을 적용하여 시스템이 파괴상태에 도달할 확률을 정량적으로 산정하였다. 본 연구에서 개발된 신뢰성 모형은 우수관의 운용, 관리, 감독은 물론 설계에 활용이 가능 할 것이다.

• Geomechanics and Engineering
• /
• 제11권2호
• /
• pp.253-267
• /
• 2016

The stability of surrounding rock will be poor when the tunnel is excavated through nearly horizontal stratum. In this paper, the instability mechanism of local nearly horizontal stratum in super-large section and deep buried tunnel is revealed by the analysis of the macro failure and micro fracture. A structural model is proposed to explain the mechanics of surrounding rock collapse under the action of stress redistribution and shed light on the macroscopic analytical approach of the stability of surrounding rock. Then, some highly effective formulas applied in the tunnel engineering are developed according to the theory of mixed-mode micro fracture. And well-documented field case is made to demonstrate the effectiveness and accuracy of the proposed analytical methods of mixed-mode fracture. Meanwhile, in order to make the more accurate judgment about yield failure of rock mass, a series of comprehensive failure criteria are formed. In addition, the relationship between the nonlinear failure criterion and $K_I$ and $K_{II}$ of micro fracture is established to make the surrounding rock failure criterion more comprehensive and accurate. Further, the influence of the parameters related to the tension-shear mixed-mode fracture and compression-shear mixed-mode fracture on the propagation of rock crack is analyzed. Results show that ${\sigma}_3$ changes linearly with the change of ${\sigma}_1$. And the change rate is related to ${\beta}$, angle between the cracks and ${\sigma}_1$. The proposed simple analytical approach is economical and efficient, and suitable for the analysis of local nearly horizontal stratum in super-large section and deep buried tunnel.

• 대한기계학회논문집A
• /
• 제39권6호
• /
• pp.631-638
• /
• 2015

본 연구에서는 고체 로켓 추진 기관의 신뢰성 분석을 위해 준-정량적 FMECA를 수행하였다. 준-정량적 FMECA는 고장모드 및 영향 분석(FMEA)과 치명도 분석(CA)를 포함하는 분석 기법으로서, FMECA 수행을 위해서 FMEA는 고체 로켓 추진 기관을 43개의 부품으로 나누어 각 부품에 대하여 도출된 총 137개의 고장모드에 대해 수행하였다. 또한 일부 고장모드의 고장률 데이터를 이용하여 치명도 분석을 수행하였다. 준-정량적 FMECA 수행을 통하여 고체 로켓 추진 기관의 각 부품에서 발생 할 수 있는 잠재적 고장모드와 고장원인 및 영향을 분석, 정리할 수 있었으며, 우선적인 개선 조치가 필요한 중요 고장모드를 확인할 수 있었다.

• Structural Monitoring and Maintenance
• /
• 제9권4호
• /
• pp.337-357
• /
• 2022

The objective of this study is to present a data-driven machine learning (ML) framework for predicting ultimate shear strength and failure modes of reinforced concrete ledge beams. Experimental tests were collected on these beams with different loading, geometric and material properties. The database was analyzed using different ML algorithms including decision trees, discriminant analysis, support vector machine, logistic regression, nearest neighbors, naïve bayes, ensemble and artificial neural networks to identify the governing and critical parameters of reinforced concrete ledge beams. The results showed that ML framework can effectively identify the failure mode of these beams either web shear failure, flexural failure or ledge failure. ML framework can also derive equations for predicting the ultimate shear strength for each failure mode. A comparison of the ultimate shear strength of ledge failure was conducted between the experimental results and the results from the proposed equations and the design equations used by international codes. These comparisons indicated that the proposed ML equations predict the ultimate shear strength of reinforced concrete ledge beams better than the design equations of AASHTO LRFD-2020 or PCI-2020.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권1호
• /
• pp.11-21
• /
• 2017

Purpose: The occurrence ranks of failure modes can come from the real failure but the severity ranks of failure modes require a highly subjective point of view of users. The severity ranks have to find more objective and scientific values. Methods: We found the optimal values by using the correlation analysis between failure mode effects and the criticality number like RPN (Risk Priority Number) in RCM. Result: This paper shows the result that verified whether the weighted values on each failure effect in criticality number calculation is suitable to the actual failures or not. To get the verification, it used the 5 year data and correlation analysis. Based on the analyzed result, We proposed the more suitable values. Conclusion: This correlation analysis approach can provide guidance of RCM analysis across many industries and situations.

• Steel and Composite Structures
• /
• 제16권6호
• /
• pp.595-609
• /
• 2014

The paper is reporting some comparisons between experimental and numerical results in terms of failure mode, failure time and ballistic properties of mild steel sheet. Several projectile shapes have been considered to take into account the stress triaxiality effect on the failure mode during impact, penetration and perforation. The initial and residual velocities as well as the failure time have been measured during the tests to estimate more physical quantities. It has to be noticed that the failure time was defined using a High Speed Camera (HSC). Thanks to it, the impact forces (average and maximum level), were analyzed using numerical simulations together with an analytical description coupled to experimental observations. The key point of the model is the consideration of a shape function to define the pulse loading during perforation.

• 품질경영학회지
• /
• 제36권1호
• /
• pp.31-39
• /
• 2008

This paper proposes a method of estimating the lifetime distribution at use condition for constant stress accelerated life tests when an infant-mortality failure mode as well as wear-out one exists. General limited failure population model is introduced to describe these failure modes. It is assumed that the log lifetime of each failure mode follows a location-scale distribution and a linear relation exists between the location parameter and the stress. An estimation procedure using the expectation and maximization algorithm is proposed. Specific formulas for Weibull distribution are obtained. An illustrative example and the simulation results are given.