• Journal of the Korean Orthopaedic Association
• /
• v.54 no.4
• /
• pp.343-352
• /
• 2019

Purpose: The purpose of this study was to document the sonographic morphology of the subscapularis footprint, particularly the 1st facet, of the non-pathologic subscapularis tendon and footprint, and analyze the correlation between the size of the 1st facet and the demographic variables. Materials and Methods: Between March 2015 and December 2017, retrospectively data analysis was performed for the ultrasound (US) scans of 115 consecutive shoulder (mean age 53.4 years, range 23-74 years) with non-pathologic subscapularis tendon and footprint. The sonographic findings of the 1st facet of the subscapularis footprint was a very unique, flat, broad, and plane angle in the upward direction, which were distinguished from the other facets. On US, the transverse (medio-lateral) and longitudinal (superior-inferior) length of the 1st facet on axis of the humerus shaft were recorded. The demographic variables, including age, site, body height, weight, body mass index (BMI), and arm length, were reviewed. Results: On US, the mean transverse length of the 1st facet was 12.75 mm (range 10.54-14.50 mm, standard deviation [SD] 0.712) and the mean longitudinal length was 12.22 mm (range 9.20-13.30 mm, SD 0.888). The transverse and longitudinal length of the size of the 1st facet were significantly greater in males than in females (p<0.001, p=0.001). Of the demographic data (body height, weight, BMI, arm length) that showed a significant positive linear correlation, the correlation with body height (transverse r=0.749, p<0.001; longitudinal r=0.642, p<0.001) showed the strongest relationship, and the correlation with the BMI was weakly related. The relationships between the size of the 1st facet to site/age were not statistically significant or appeared to have no linear correlation. Conclusion: The structural and morphologic features of the 1st facet of the subscapularis footprint on the US were identified. This will provide anatomic knowledge of an US examination for subscapularis tendon pathology.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.20 no.2
• /
• pp.126-130
• /
• 2009

Arytenoid motion has long been recognized as complex. Misunderstandings about the specifics of arytenoid motion remain prevalent. The resultant misunderstandings have led to erroneous or suboptimal clinical approaches to the treatment of vocal fold immobility. A thorough understanding of the anatomy of the arytenoid and cricoid cartilages, the cricoarytenoid joint, and related ligaments, muscles, and other structures is essential in order to fully understand laryngeal motion disorders. Arytenoid motion occurs in three directions. Movements involving a change anteriorly and posteriorly, as well as vertically, are due to the revolving or pitchlike motion of the arytenoid along the minor axis of the cricoid's elliptically shaped facet. The medial and lateral movements are due to the orientation of the arytenoid which in turn is determined by the forward, lateral, and inferior inclination of the cricoid-arytenoid facet. During adduction it is the outward angulation of the vocal process from the body of the arytenoid that allows the entire length of the vocal proceses to approximate one another and to have this meeting occur at the proper vertical height.

• Journal of Korean Foot and Ankle Society
• /
• v.9 no.2
• /
• pp.193-196
• /
• 2005

A posterior 3-portal arthroscopic approach with the patient in the prone position provides a novel and optimal approach for isolated subtalar arthrodesis. This approach facilitates access to the posterior talocalcaneal facet and facilitates safe access with regard to the posteromedial neuromuscular bundle. The technique involves prone positioning, establishment of two posterolateral portals and one posteromedial portal, arthroscopic posterior talocalcaneal facet debridement, percutaneous morcellized bone grafting and internal screw fixation. Preliminary results have shown high patient satisfaction, an excellent fusion rate and less postoperative morbidity than open subtalar arthrodesis.

• Journal of Korean Foot and Ankle Society
• /
• v.28 no.2
• /
• pp.60-67
• /
• 2024

Purpose: Sinus tarsi syndrome (STS) is caused by various pathologies. However, the exact etiology of STS remains controversial. This study evaluated the imaging and arthroscopic findings of patients who underwent surgical treatment after conservative treatment for STS failed. Materials and Methods: Between December 2014 and August 2018, 20 patients (21 cases) who underwent surgical treatment for STS were included in the study. The clinical results were analyzed using the visual analog scale (VAS) and the American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot functional scale. The radiographic results were analyzed using Meary's angle, calcaneal pitch angle, and hindfoot alignment angle. The pathologic conditions of sinus tarsi were confirmed by magnetic resonance imaging (MRI) and subtalar arthroscopy. Synovitis, bone edema, and accessory anterolateral talar facet (AALTF) were evaluated on MRI. Synovial thickening, cartilage damage, interosseous talocalcaneal ligament (ITCL) and cervical ligament rupture, soft tissue impingement, AALTF, and accessory talar facet impingement (ATFI) were evaluated by subtalar arthroscopy. Results: The mean duration of symptoms was 28.7 months (4~120). All patients showed significant improvement in the VAS and AOFAS ankle-hindfoot scale. Significant improvements in hindfoot alignment angle and Meary's angle postoperatively were noted in patients who underwent medial displacement calcaneal osteotomy. MRI confirmed synovitis in all patients, AALTF in 19 cases (90.5%), and ATFI with bone edema in seven cases (33.3%). In subtalar arthroscopy, pathologic conditions were observed in the following order: synovitis in 21 cases (100%), AALTF in 20 cases (95.2%), ITCL partial rupture in nine cases (42.9%), and soft tissue impingement in seven cases (33.3%). All cases had two or more pathological conditions, and 15 (71.4%) had three or more. Conclusion: In cases of STS that do not respond to conservative treatment, a comprehensive examination of the lesions of the tarsal sinus and lesions around the subtalar joint is essential.

• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.137-143
• /
• 2018

DICOM images of patellofemoral bones were converted into a stereolithography file, and a Unigraphics CAD program was used to create a CAD modeling in which there exists point, line and facet information. The modeling extraction of joint facets was performed by linking two adjacent points into lines in the stereolithography file by using the Unigraphics rapid spacing function and then linking the lines into facets to complete the entire modeling. This modeling extraction was performed based on the anatomical knowledge of joint facet directions. As a result, a personalized space modeling and solid modeling were produced for the joint facets of patellofemoral bones. This was followed by a CAM control computing operation of solid modeling on graphite materials and 5-axis machining of patellofemoral bones. That is the description of a method for a personalized implant modeling by using DICOM images of patellofemoral bones.

• The Korean Journal of Pain
• /
• v.19 no.2
• /
• pp.282-284
• /
• 2006

Percutaneous radiofrequency thermocoagulation has been applied in patients with various forms of chronic pain, such as facet joint pain, cancer pain and trigeminal neuralgia. A major portion of the hip joint is innervated by the articular branches of the femoral and obturator nerves. Radiofrequency thermocoagulation of the articular branches of the obturator and femoral nerves can be a good alternative treatment for patients with hip joint pain, especially in those where surgery is not applicable. A patient suffering hip joint pain due to metastatic cancer underwent multiple radiofrequency lesioning of the femoral and obturator nerves at $80^{\circ}C$ for 120 seconds, using a Racz-Finch Kit. The patient experienced about a 50% reduction in the pain, without any numbness or other side effects.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.3
• /
• pp.358-365
• /
• 2001

Objectives : Although posterior lumbar fusion operations had been reported to accelerate spinal degeneration, there have been only a few studies for their biomechanical effects. We have studied the change of motion range at the vertebral joint one level above the fusion(UVJ) in pedicle screw fixation group(PSF)(n=13) where facet capsule was destroyed and in posterior lumbar interbody fusion group(PLIF)(n=8) where it was spared. Patients and Methods : The patients were divided into early(3 to 6 months) and late(over 12 months) according to postoperative follow-up period. The flexion, extension and flexion-extension angles(FA, EA, FEA) were measured at the UVJ with pre-operative, early and late post-operative films. Results : Mean age and male to female ratio were $52.7{\pm}9.3$ and 1 : 3.2. Mean follow-up periods were $144.1{\pm}30.0$ and $528.8{\pm}160.3$ days in early and late groups, respectively. The FEA and FA in the late PSF($11.8{\pm}3.1$, $8.5{\pm}2.9$) were significantly greater than pre-operative angles($7.8{\pm}3.9$, $5.1{\pm}3.7$)(p<0.01, p<0.05). All angles in the PLIF showed no significant changes with time. The FEA and FA in the late PSF($11.8{\pm}3.1$, $8.5{\pm}2.9$) were significantly greater than those of the late PLIF($7.6{\pm}2.3$, $3.4{\pm}2.0$)(p<0.01, p<0.001). All angles at early follow-up period were similar between PSF and PLIF. The EA showed no significant change in relation with follow-up period or fusion method. Conclusion : As a result, the facet capsule injury in pedicle screw fixation seems to be related with increased flexion angle or degeneration of the adjacent joint above the fused vertebra in the late phase.

• Journal of Korean Foot and Ankle Society
• /
• v.19 no.1
• /
• pp.11-17
• /
• 2015

Purpose: To report the radiographic and clinical results of 6.5 mm cancellous full threaded buttress screw or Steinmann pin fixation to maintain a reduction of calcaneal posterior facet depression fracture. Materials and Methods: From June 2009 to June 2012, 50 consecutive cases with calcaneal joint depression fracture that underwent open reduction and screw or pin fixation were enrolled in this study. A 6.5 mm cancellous full threaded screw was inserted from the posteroinferior aspect of the calcaneal tuberosity to the posterior facet (group A) or Steinman pin was inserted from the posterosuperior aspect of the calcaneal tuberosity to the calcaneocuboidal joint (group B). Both preoperative and postoperative Bohler and Gissane angles were measured radiographically, and American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot scale on the final follow-up were assessed. Results: The mean age of patients was 44.1 years, and the mean follow-up period was 27.2 months. According to the Sanders classification, 28 cases were type II and 22 cases were type III. In Sanders type II, Bohler and Gissane angles improved significantly from $10.1^{\circ}$ and $126.2^{\circ}$ preoperatively to $27.2^{\circ}$ and $117.1^{\circ}$, respectively, in the immediate postoperative radiograph, and at the final follow-up, $26.6^{\circ}$ and $118.6^{\circ}$, respectively. In Sanders type III, Bohler and Gissane angles improved significantly from $5.0^{\circ}$ and $129.8^{\circ}$ to $29.9^{\circ}$ and $119.3^{\circ}$, respectively, in the immediate postoperative radiograph, and $26.9^{\circ}$ and $120.2^{\circ}$ at the final follow-up. All cases achieved bony union, and the average period until complete union was 13.3 weeks. AOFAS ankle-hindfoot scale was 82.6 in Sanders type II and 77.3 in Sanders type III at the final follow-up. Conclusion: A 6.5 mm cancellous full threaded buttress screw or Steinman pin fixation is a noninvasive treatment method with a merit of being able to maintain the bearing capacity of the posterior facet comparable to plate fixation.

• Journal of Korean Foot and Ankle Society
• /
• v.10 no.1
• /
• pp.42-47
• /
• 2006

Purpose: This study was performed to analyze the characteristics of calcaneocuboid joint involvement in intraarticular calcaneal fractures. Materials and Methods: Total number of 92 patients (111 cases) who underwent operation for intraarticular calcaneal fractures between Jan. 2000 and Oct. 2005 were included in this study. The preoperative computed tomographs of the subjects were retrospectively reviewed to analyze calcaneocuboid joint involvement. Results: It was revealed that 63 cases (56.8%) involved calcaneocuboid joint; 29cases (46.0%) showed type 1 (undisplaced or minimally displaced type, articular gap ${\le}1\;mm$), 16 cases (25.4%) exhibited type 2 (moderately displaced type, articular gap ${\ge}2\;mm$), 7 cases (11.1%) were included in type 3 (comminuted type) and 11 cases (17.5%) belonged to type 4 (fracture and dislocation). 48 out of 63 cases belonged to Sanders classification II and III that involved calcaneocuboid joint and included 25 cases (52.1%) of type 1 and 14 cases (29.2%) of type 2. Among 15 out of 63 cases included in Sanders classification IV, 4 (26.7%) showed type 1 and 6 (40.0%) belonged to type 4. According to our results, Sanders classification allowed to predict pattern of the involvement of calcaneocuboid joint (P<0.05). However, there was no statistically significant relationship between degree of posterior facet joint injuries and calcaneocuboid joint involvement (P>0.05). Conclusion: Calcaneocuboid joint involvement in intraarticular calcaneal fractures was common and more than half showed severe injuries. We concluded that further studies on the involvement of calcaneocuboid joint should be performed prior to surgical treatment of intraarticular calcaneal fractures.

• Journal of Welding and Joining
• /
• v.21 no.2
• /
• pp.102-110
• /
• 2003

A visual sensor consisted of polygonal mirror, laser, and CCD camera was proposed to measure the distance to the weld joint for recognizing the joint shape. To scan the laser beam of the sensor onto an object, 8-facet polygonal mirror was used as the rotating mirror. By locating the laser and the camera at axi-symmetrical positions around the mirror, the synchronized-scan condition could be satisfied even when the mirror was set to rotate through one direction continuously, which could remove the inertia effect of the conventional oscillating-mirror methods. The mathematical modelling of the proposed sensor with the optical triangulation method made it possible to derive the relation between the position of an image on the camera and the one of a laser light on the object. Through the geometrical simulation of the proposed sensor with the principal of reflection and virtual image, the optical path of a laser light could be predicted. The position and direction of the CCD camera were determined based on the Scheimpflug's condition to fit the focus of any image reflected from an object within the field of view. The results of modelling and simulation revealed that the proposed visual sensor could be used to recognize the weld joint and its vicinity located within the range of the field of view and the resolution. (Received February 19, 2003)