• Asian Journal for Public Opinion Research
• /
• v.9 no.2
• /
• pp.188-211
• /
• 2021

Decreasing response rates to traditional survey methods, like face-to-face and telephone interviews, have led survey practitioners around the world to seek new ways of conducting surveys in recent years." The COVID-19 pandemic exacerbated this problem because it made conducting face-to-face interviews even more difficult than before. For example, it made conducting face-to-face surveys infeasible in 2020 in South Korea, and so the Korean Academic Multimode Open Survey (KAMOS) was unable to conduct a planned face-to-face survey to recruit new panel members. The entire 8,514-member panel, established via two-stage probability-based sampling from 2016 to 2019, was invited to take three online/telephone surveys in 2020. Of these panel members, 1,352 responded to at least one survey in 2020. To test to what extent the panel remained representative of the adult South Korean population, we compared the two groups of panel members: those who responded to at least one survey in 2020 and those who did not. After weighting both groups on the basis of age, sex, and geographical area, we analyzed their responses to some of the questions that were asked during multiple rounds of the face-to-face panel-recruiting interviews. Using Cohen's d for survey items that could be analyzed numerically and Cramér's V for categorical items, we were able to conclude that the respondents to the 2020 surveys were equivalent to the non-respondents in terms of both demographics and in the answers they originally gave to substantive questions on a variety of topics related to social science or public opinion research, including questions about quality of life, societal issue, and politics (Cohen's d items <0.2, 95% CI; Cramér's V items <0.1, 95% CI). This analysis may provide a model for others who wish to test the continued representativeness of their panel or who would like to use a different survey mode or change some other aspect of their methodology and test whether it is equivalent to their former methodology. Our success in building a panel that retained its representativeness may be useful to those in other countries where face-to-face surveys had previously been the norm but are becoming increasingly difficult to conduct.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.145-155
• /
• 2023

Objectives: A fit test panel is needed to identify the fit performance of a respirator and its face seal. This is a criterion for selecting subjects that can represent the facial characteristics of users. Although anthropometry data has been developed for people in United States and China it is not yet present in Korea. This study aimed to develop a Korean fit test panel and test headform. Methods: For the 7th and 8th waves of the Size Korea anthropometry data, facial measurements of 11,429 people aged 15 to 69 years were used for analysis. PCA and bivariate panel were classified using the ISO16976-2:2022(E) anthropometrics analysis method. Based on this result, a static headform was developemed and a fit test chamber was constructed. Results: Of the 11,429 Korean people used for principal component analysis, 11,300 were included in the ellipse, marking an acceptance rate of 98.87% on PCA panel. The face types were classified into five types. Among them, a large, medium, and small static headform were printed using a 3D printer. In addition, 10,985 people (96.12%) were included in the bivariate panel based on face length and face width. The y-axis (face length) boundary was 97.87 to 134.59 mm, and the x-axis (face width) boundary was 120.75 to 158.23 mm. Conclusions: Compared to the ISO analysis, the Korean principal component was narrower in the width item (PC1) and longer in the length item (PC2). For the future, it is necessary to conduct a fit test using the developed headform and chamber device to confirm the usefulness of this Korean test panel. Therefore, this study is considered valuable as basic research for Korean test panels.

• Advanced Composite Materials
• /
• v.17 no.1
• /
• pp.41-56
• /
• 2008

In this research, optical fiber sensors and shape memory alloys (SMA) were incorporated into sandwich panels for development of a smart honeycomb sandwich structure with damage detection and shape recovery functions. First, small-diameter fiber Bragg grating (FBG) sensors were embedded in the adhesive layer between a CFRP face-sheet and an aluminum honeycomb core. From the change in the reflection spectrum of the FBG sensors, the debonding between the face-sheet and the core and the deformation of the face-sheet due to impact loading could be well detected. Then, the authors developed the SMA honeycomb core and bonded CFRP face-sheets to the core. When an impact load was applied to the panel, the cell walls of the core were buckled and the face-sheet was bent. However, after the panel was heated over the reverse transformation finish temperature of the SMA, the core buckling disappeared and the deflection of the face-sheet was relieved. Hence the bending stiffness of the panel could be recovered.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.4
• /
• pp.529-535
• /
• 2013

A new thin sandwich panel composed of an aluminum expanded metal core adhesively jointed with stainless steel face sheets is introduced, and its mechanical behavior under three-point bending is investigated. The strength and stiffness are analyzed theoretically, and the press-formability and strength enhancement are evaluated experimentally. The specimens with the specific configurations exhibit face yielding well before face-core separation, which means that the sandwich panel can be formed by a press without failure. The measured load levels corresponding to the face yielding and the face-core separation agree fairly well with the theoretical estimations. For a given weight, the sandwich panel is superior to a solid panel in terms of strength, stiffness, and press-formability.

• Steel and Composite Structures
• /
• v.16 no.4
• /
• pp.389-415
• /
• 2014

This study deals with dynamic model of composite sandwich panels with functionally graded flexible cores under low velocity impacts of multiple large or small masses using a new improved higher order sandwich panel theory (IHSAPT). In-plane stresses were considered for the functionally graded core and face sheets. The formulation was based on the first order shear deformation theory for the composite face sheets and polynomial description of the displacement fields in the core that was based on the second Frostig's model. Fully dynamic effects of the functionally graded core and face-sheets were considered in this study. Impacts were assumed to occur simultaneously and normally over the top and/or bottom of the face-sheets with arbitrary different masses and initial velocities. The contact forces between the panel and impactors were treated as internal forces of the system. Nonlinear contact stiffness was linearized with a newly presented improved analytical method in this paper. The results were validated by comparing the analytical, numerical and experimental results published in the latest literature.

• Journal of Digital Convergence
• /
• v.18 no.12
• /
• pp.127-132
• /
• 2020

The Smart Music Learning Device(SMLD) presented in this paper constructs the display part by attaching the touch panel to both sides of the transparent panel. The main processing unit uses raspberry pie, and the operating system uses Android. On the transparent panel, music education contents are displayed, and on the touch panels 1 and 2, the inputs of learners and instructors are accepted. The signal input from the touch panels 1 and 2 controls the progress of the music education contents through a process in the main processing unit. This control process design and implement a two - sided panel - based interactive training algorithm. This device aims at musical education based on mutual understanding. Therefore, it conducts face-to-face education using music education contents presented through transparent panel. This allows the instructor to know in real time the response to the learner, thus improving the understanding of the learning and the quality of the education. Also, the learner's concentration can be improved.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.34 no.3
• /
• pp.279-291
• /
• 2024

Objective: This was to develop headforms for the labor population, based on a three-dimensional(3D) face dimensions data base(DB) and a principal component analysis(PCA) fit test panel, in selection, use and maintenance of respirators in Korea. Methods: This study was part of a two-year-project initiated in 2021. The study was designed and conducted in line with ISO 16976-2 while subjects were those employed in the development of the PCA fit test panel. The approaches included literature review; examination on conformity of the 3D face dimensions DB; and development of headforms representing the labor population. The mean data were used in order to construct each model of the headforms through a way of 3D modeling and 3D printing technology. Results: A total of 2,752 subjects were determined. Five models of headforms(small, medium, large, long-narrow, short-wide) were completely constructed for the labor population. For example, means of the 10 face dimensions for medium headform model were: minimum frontal breadth 106 mm, face width 136 mm, jaw width 127 mm, face length 111 mm, interpupillary distance 69 mm, head breadth 164 mm, nose protrusion 12 mm, nose breadth 34 mm, nasal root breadth 35 mm, and nose length 50 mm. Conclusions: Five models of headforms were newly constructed using the study data. It is likely desirable that the constructed headforms, together with the 3D face dimensions DB as well as the PCA fit test panel, can be utilized more effectively in selection, use and maintenance of respirators for users including the labor population.

• Journal of Information Display
• /
• v.6 no.3
• /
• pp.26-29
• /
• 2005

Nanosize cobalt aluminate($CoAl_2O_4$) power was coated as filter layer for us to improve the color purity and contrast performances on the inner face of CRT panel. We simulated color properties by measuring the transmittance and thickness of the coated filter layer. Contrast performance could be improved and color gamut was also changed by the selective light absorption of filter layer at 580${\sim}$605 nm.

• Steel and Composite Structures
• /
• v.44 no.4
• /
• pp.519-529
• /
• 2022

Sandwich structures with the superior mechanical properties such as high stiffness and strength-to-weight ratio, good thermal insulation, and high energy absorption capacity are used today in aerospace, automotive, marine, and civil engineering industries. These structures are composed of moderately stiff, thin face sheets that withstand the majority of transverse and in-plane loads, separated by a thick, lightweight core that resists shear forces. In this research, the finite element technique is used to simulate a sandwich panel with a truss core under axial compressive stress using ABAQUS software. A review of past experimental studies shows that the bondline between the core and face sheets plays a vital role in the critical failure load. Therefore, this modeling analyzes the damage initiation modes and debonding between face sheet and core by cohesive surface contact with traction-separation model. According to the results obtained from the modeling, it can be observed that the adhesive stiffness has a significant influence on the critical failure load of the specimens. To achieve the full strength of the structure as a continuum, a lower limit is obtained for the adhesive stiffness. By providing this limit stiffness between the core and the panel face sheets, sudden failure of the structure can be prevented.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.1
• /
• pp.25-31
• /
• 2004

The heat transfer characteristics of a plasma display panel has been investigated for cooling an electronic module. Hence, a two dimensional $\kappa-{\varepsilon}$ turbulent model was developed to predict the temperatures of the panel and module. The heat conduction was solve for the material region. To consider the mixed convection at the solid-fluid interfaces between the air and the panel and module, the energy equation was solved simultaneously. When the electronic module stands face to face with the panel, the temperatures of panel and module are lower than other arrangement due to the chimney effect. However the gap between the panel and module does not affect significantly the maximum temperature when the aspect ratio is less than 0.1. To maintain the maximum temperature of the module under a certain limit, the passage of air should be well designed by the optimal layout of electronic modules which have different heat emission.