• Textile Coloration and Finishing
• /
• v.21 no.2
• /
• pp.14-21
• /
• 2009

In this article, silk fabric was treated with silver nitrate ($AgNO_3$) as oxidizing agent, with conditions such as concentration, and treating time, and subsequently treated with reducing agents such as sodium boron hydride ($NaBH_4$) and sodium sulfide ($Na_2S$) to obtain cathodic coloration. After coloration of silk fabric, dyeing properties (K/S value), colorfastnesses such as wash, rubbing and light, and antibacterial activity property were examined. $AgNO_3$ treating time and reducing time did not influence K/S value, whereas the pH value at alkaline region showed a high K/S value of silk fabric. The cathodic colorations of silk fabric with both of reducing agents at $30^{\circ}C$ have excellent color fastnesses. Also the high antibacterial activities were obtained by the treatment with silver nitrate even at 1% of lower concentration.

• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.313-317
• /
• 2005

The anisotropy in creep behavior of two types of nonwoven fabrics (needle-punched and thermobonded spun laid) has been studied. It has been observed that the amount of time dependent extension depends on the direction, amount of loading and the structure of nonwoven the fabrics. The time dependent extension (creep) for the nonwoven fabric increases with the increase in amount of load. The higher initial extension and creep are observed for needle-punched nonwoven fabric as compared to thermobonded spun-laid nonwoven fabric. The creep behavior of needle-punched nonwoven shows a logarithmic relationship with time, but the thermobonded spun-laid nonwoven fabric does not show such logarithmic relationship. For a particular fabric, the creep is dependent on the fiber arrangement and is minimum in the direction in which the proportion of fiber is maximum and visa versa.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.204-209
• /
• 2003

The effect of padding solution on the microwave heat dyeing of polyester fabric was studied extensively. Polyester fabrics were impregnated in aqueous urea solution and aqueous sodium chloride solution for 10 min and then dyed for 7 min by microwave apparatus (2450 MHz, 700 W) under optimum conditions which provide good exhaustion. Aqueous solutions of urea and sodium chloride showed more effective than water as a padding solution for microwave heat dyeing. The type of solvent added in padding media and its concentration significantly affects the K/S values of dyed polyester fabric. Added solvents such as n-hexane, acetone, and dimethyl formamide were also more effective than 100 % water as padding media for the microwave heat dyeing. It is supposed that the effect of used solvents on dyeing property of polyester fabrics depends on the solubility parameter difference between solvent and polyester fabric.

• Fashion & Textile Research Journal
• /
• v.4 no.3
• /
• pp.273-283
• /
• 2002

In this study, the correlations of the two frictional testers have been investigated; one is the KES-FB4 system, the other is the Fabric-on-Fabric Frictional tester which was devised by authors. According to the results, the correlation between the frictional coefficients measured by the two testers has been shown highly as the load increased. But the effect of roughness of fabric surface was not dearly revealed in this study. The frictional characteristics of fabric woven from filament yarns were different with those of fabric woven from spun yarns. And, like the other materials, the effect of load on fabrics used in this experiment was related with the frictional force between two fabrics. The frictional behaviors, however, were obviously different with harder material because the frictional coefficients were not constant as the load increased.

• Journal of the Korean Society of Costume
• /
• v.51 no.1
• /
• pp.75-85
• /
• 2001

The purpose of this study is to provide for the basic data useful to the high quality knitwear production. For this purpose, knit promotions that product knitwear for 20 age ∼ 30 middle age women were sampled to survey the fabric planning and production·quality management of knitwear, and their directors were surveyed through direct interviews. Data is processed by a computer(SPSS) and analyzed by using frequency, percentage, mean. The results of this study are as fellows. 1. Most of the sample companies were getting smaller or pettier in terms of capital, number of employees. 2. Knit promotions were universally using acrid and wool as knit fabric. 3. Knitwear tended to be producted much in knit promotions. 4. It is needed to use high quality fabric and perform careful sewing for knitwear quality rising.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.3_4
• /
• pp.452-459
• /
• 2004

The purpose of this study was to evaluate the effect of reference fabric for the tactile sensation of worsted fabrics. As specimens, 32 worsted fabrics for spring/fall suits were selected. A series of subjective evaluation for roughness, harshness, coarseness, smoothness, warmth, bulkiness and softness were performed with 20 trained panels. The panels were selected by the test of consistency and trained for 3 weeks to enhance the reproducibility and consistency. Subjective evaluation was performed using 9 points Semantic Differential Scales with and without reference fabric. Results showed that the sensations were very similar between the results for the test of with or without reference. However the standard deviations of ratings for the with-reference were much less than that of without-reference which means the use of reference fabric can reduce the subjective error or can reduce the number of panels to test.

• Textile Coloration and Finishing
• /
• v.20 no.4
• /
• pp.53-59
• /
• 2008

For the modification of wool surface, wool fabrics treated with oxygen low-temperature plasma(LTP) and dichloroisocyanuric acid(DCCA) were dyed with milling type acid dye. The difference of dyeing properties on modified and control wool fabric were investigated. DCCA treated wool showed that saturation dye uptake and dyeing desorption ratio were higher than LTP treated wool. Dyeing transition temperatures of DCCA and LTP treated wool fabrics were 20$^{\circ}C$ degree lower than control wool fabric. In light color fastness test, DCCA treated wool fabric was 1 grade lower than LTP or control wool fabric.

• Textile Coloration and Finishing
• /
• v.20 no.4
• /
• pp.43-52
• /
• 2008

Wool fabric was treated with oxygen low-temperature plasma (LTP) and dichloroisocyanuric acid. The effect of dimensional stability (relaxation shrinkage, hygral expansion, felting shrinkage), tensile strength and elongation, crease recovery, and hand of wool fabric between LTP, DCCA treated wool fabrics and control wool fabric were investigated. SEM photograph showed that a little micro crack was formed on the fiber surface by plasma treatment with hard condition and epicuticle scale was damaged by DCCA treatment. Felting shrinkage, tensile strength and total hand value were much different in each samples.

• Textile Coloration and Finishing
• /
• v.5 no.4
• /
• pp.1-9
• /
• 1993

The Cotton fabric was dyed with various directd dyes, and then treated with copper sulfate or copper sulfate/thiourea. Munsell color system, dye exhaustion, tensile strength, light fastness, washing fastness and rubbing fastness were investigated for the treated fabrics. The results obtaind are as follows: 1. The color variation of the cotton-dyed fabric by aftertreatment with copper sulfate was shown redish, but original color with copper sulfate/thiourea. 2. Copper sulfate/thiourea was much more effective than copper sulfate only to increase the light fastness, washing fastness and rubbing fastness. 3. Dye exhaustion of the cotton-dyed fabric by aftertreatment with copper sulfate was decreased about 20% more than those of untreated. 4. Tensile stregth of cotton-dyed fabric by aftertreatment with copper sulfate/thiourea was decrease about 10% more than those of untreated.

• Korean Journal of Human Ecology
• /
• v.5 no.1
• /
• pp.42-47
• /
• 2002

Antimicrobial activity of silk and cotton fabrics dyed with gromwell colorants was examined by shake flask method. The effects of bacterial reduction rate on dye uptake and mordanting were explored. The silk(K/S value 8) and cotton fabric (K/S value 4) dyed with gromwell colorants showed high bacterial reduction rate of 99 % and 88 %, respectively. Post-mordanted silk fabric increased at K/S value, also showed higher bacterial reduction rate than unmordanted. But the effects of antimicrobial activity on mordants showed respectively different results. Pre-mordanted cotton fabric except Sn mordant increased at K/S value, but it was not significant. Pre-mordanted cotton fabric showed significantly higher bacterial reduction rate than unmordanted. Therefore, it was considered that dye uptake of cotton fabric dyed with gromwell colorants and mordants were involved in the bacterial reduction rate. It was concluded that gromwell colorants had antimicrobial activity.