• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.7
• /
• pp.1117-1123
• /
• 1997

This paper describes the measurement of thickness of still air layer above fabrics and its relationship to structural properties of fabrics. Rayon fabrics - of both filament and spun - and wool nylon blended fabrics varied in terms of surface hairiness were used. Temperature and relative humidity above fabrics were measured at the various distances from the fabric surface. Increase in the thickness of fabric, fabric weight, yarn count, and crimp resulted increase in thickness of still air layer above fabric. Surface hairiness of fabrics as well as the structural properties were found to be related with the thickness of still air layer above fabrics.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1577-1578
• /
• 1997

We have studied the effect of the rubbing fabric for liquid crystal alignment and pretilt angle generation in nematic liquid crystals (NLC), 4-cyano-4-n-penthylbiphenyl (5CB), on rubbed polyimide (PI) surfaces. The pretilt angle of 5CB for nylon and rayon fabric is larger than that of cotton fabric in weak rubbing on rubbed PI surfaces. We conclude that the pretilt angle of 5CB is strongly related to the rubbing fabrics on rubbed PI surfaces.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.135-154
• /
• 1997

The purpose of this study is to clarify the reason of the change of production-and-marketing system and of the regional division. The data for this study were collected by administering interviews with people engaging in hemp fabric industry: namely, craftsmen and managers in the production and marketing of "hemp fabric" handcraft. The summary of this study is as follows: First, the hemp fabric industry is a main subsidiary business of agriculture in Andong. The process of making hemp fabric heavily depends on manual labor. The process is divided into five stages: namely, cultivating hemp, pre-reeling, reeling, weaving, and colouring. Second, Andong "hemp fabric" handicrafts industry had been continuously growth until the late 1960s. During the period of Japan colonization, it was under boom condition: while the other traditional fabric industries were declined. In the 1970s, the decrease of the demand of hemp fabric was the result of mass production of substitute goods on factory system: while, in the 1980s, the growth of per capital income play an important role in bringing about the increased demand of hemp fabric. Third, in the 1980s. production-and-marketing system was changed as the result of the effort to improve the quality and the process, the advanced age of craftsmen, and the weak function of existing marketing systems. The social division of labor within the district is well developed between cultivating hemp, reeling and weaving. The social division of labor is also found in the partly process of handcratfs, and between the production and marketing. The social division of labor between production and marketing is not strongly developed to establish a reliable enterprise that develops a new product and opens a new market. Fourth, the spatial boundary of the production of hemp fabric handcrafts becomes limited into a special region based on the regional specialization of hemp cultivating and the differentiation of utilization of labor.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.6
• /
• pp.583-591
• /
• 2012

This study selected three model designs used for air injection type welding clothes designed for insulation purposes and analyzed the performance of each design. The bending characteristics were analyzed in order to identify the flexibility of the welded areas; subsequently, the seam breaking strength and water pressure resistance were analyzed to identify the bonding strength. In addition, two types of waterproof fabric, polyurethane (PU) coated 2 layer and PU laminated 2 layer fabrics, were used for a performance analysis, according to fabric processing specifications. The circle type showed the highest flexibility in the terms of bending characteristics that influence wearability and were followed by the wave and the straight type. In terms of breaking strength, the straight type showed the highest breaking strength, followed by the wave and the circle type. The water pressure resistance analysis found that the wave type was superior to the straight type in terms of water pressure resistance. The wave type is deemed to be a design type suitable for maximizing performance, provided that the issue of stabilization in the welding production process is addressed. Looking at the bending characteristics of waterproof fabric for each specification, the laminating waterproof cloth outperformed the coated waterproof cloth in terms of flexibility. However, in terms of seam breaking strength, the coated waterproof cloth outperformed the laminated cloth. In contrast, the water pressure resistance of the laminated waterproof fabric was found to be higher than the coated waterproof fabric, leading to the conclusion that the bonding strength of the laminated waterproof fabric is higher than that of the coated waterproof fabric based on the assumption of injecting air.

• Fashion & Textile Research Journal
• /
• v.20 no.5
• /
• pp.592-599
• /
• 2018

The purpose of this study is to investigate consumer needs, image sensibility and preference of bedding fabric according to size and spacing of dot pattern. 18 kinds of dot pattern fabrics were designed with different diameters(6, 8, 10cm) and distances(4, 7, 10cm) in regular arrangement of diamond figure. The subjects were 162 male and female university students. The data were analyzed by SPSS 24.0. Fabrics were assessed subjectively using a 5-point scale 17 consumer needs and 33 sensory descriptors. The most consumer's needs for bedding fabric was shown to be functionality of bedding including hygiene, touch, warmth, ease of washing and management, air permeability, and hygroscopicity. The other parameters of consumer's needs were shown to be physical property and design parameter. The results of analysis of the dimension of image sensibility for fabrics with different size and spacing of dots are derived from six factors including joyfulness, coziness, uniqueness, charm, femininity, and complexity. As a result of analysis of preference with fabric kinds, there was a significant difference in preference with fabrics. The preferred fabrics were characterized by the pattern and the base fabric being striking three-dimensionally with 1/3 twill and 3/1 twill fabric. Sensory descriptors related to joyful image and unique image were analyzed as evaluation terms that can distinguish the preferences of fabrics. Correlation analysis showed the fabrics are preferred as the difference in luminance and reflectance between the base and pattern of the fabric become larger and the spacing of patterns become closer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.11
• /
• pp.1798-1811
• /
• 2010

This research evaluates the changes in the comfort-related properties of high-density fabric, such as moisture permeability and waterproofness, in order to assess the relative importance of laundry conditions for clothing properties after repeated laundering and suggest the best laundering conditions for high-density fabric through the identification of the most influential factor. A commercial high-density fabric was washed 25 times in a drum-type washer using nine different laundry conditions based on profiles derived from a fractional factorial design. To evaluate the changes in the comfort-related properties of the fabric, pore size, air permeability, water vapor transport, water repellency, and water resistance were measured. The comfort-related properties of the fabric deteriorated after repeated laundering by the damaged surface finish; in addition, the damaged surface also changed the pore size. As a result, the water repellency and water resistance decreased. The detergent was the most responsible factor to change the properties among the four factors of detergent, hardness, temperature, and RPM. The best laundering conditions for the fabric was a neutral detergent, soft water of 70ppm, a temperature of $15^{\circ}C$, and 30rpm.

• Journal of Fashion Business
• /
• v.7 no.2
• /
• pp.156-164
• /
• 2003

It has been known that the natural colorants exhibit good dye-uptake toward cotton, silk, and wool fibers, while they do poorly toward synthetic fibers. This study utilizes the chitosan treatment in order to improve the dye-uptake for the natural fibers and to enable the synthetic fibers, whose dye-uptake levels are low, show better affinity toward the natural colorants. Since chitosan has $-NH_2$ group and -OH group in the structure, the dyeability of the fabric will be improved when the fabric is treated with the chitosan. Cotton fabric as one of the natural fiber fabrics and nylon fabric as one of the synthetic fiber fabrics were selected for this study. 1. In case of cotton fabric, the chiosan treatment takes effect for the Caesalpinia sappan and cochineal, resulting in remarkable ${\Delta}E$ increase after dyeing. Chitosan helps in developing dark shade by increasing the uptake of the Caesalpinia sappan and cochineal. It does not, however, participate in the developing of the specific color as does a metallic mordant. 2. In case of dyeing cotton fabric with Gardenia jasminoides, the effect of the treatment with mordant and chitosan is not very pronounced. It is thought that the Gardenia jasminoides uptake is accomplished in a direct manner in the cellulose chains without the aid of mordant. 3. Air-permeability is decreased when the non-mordanted and non-chitosan treated cotton fabric is dyed with Caesalpinia sappan, cochineal, and Gardenia jasminoides. 4. In case of nylon fabric, premordanting and chitosan treatments are not highly effective in promoting the dye-uptake.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.17-27
• /
• 2017

This study evaluated the performance of bedding fabrics consisting of warp (150d/144f, polyester) and weft (polyester, Tencel and cotton MVS blended spun yarn) with blend ratio of weft. We measured electrostatic propensity, moisture properties, pilling properties and mechanical properties of the fabrics for this study. F-P fabric showed outstanding moisture properties and pilling properties. However, tensile properties and electrostatic propensity were relatively inferior to other characteristic values. Significant static electricity may make F-P fabric uncomfortable. F-P7C3 fabric showed outstanding moisture properties and pilling properties. Static electricity may make F-P7C3 fabric uncomfortable; in addition, F-P5C5 fabric showed outstanding moisture properties and pilling properties. Rough and stiff hand feel were expected to increase because tensile properties decreased and surface properties increased. F-C fabric showed outstanding pilling properties and electrostatic propensity. However, it showed inferior moisture control properties. F-P5T4C1 fabric showed outstanding moisture properties, pilling properties and electrostatic propensity. Several properties are outstanding; however, the hand feels are very rough and stiff from bending. The water evaporation and static electricity increased with increasing polyester content. As the content of cotton increased, tensile properties were improved. However, water evaporation and static electricity decreased. The addition of Tencel increased the thickness and compression energy so that it exhibited a soft characteristic upon compression and an excellent moisture control properties, but the surface became somewhat coarse.

• Science of Emotion and Sensibility
• /
• v.13 no.2
• /
• pp.403-412
• /
• 2010

This study was aimed to consider the influence of hue-tone, dyes, and mordants of naturally dyed silk fabric on color sensibility image factors and to establish color sensibility image scales of naturally dyed silk fabric by color and image descriptors. By single or sequential dyeing with various natural dyes commercially available in domestic and foreign market on the same silk fabric, a total of 66 colored fabric stimuli were prepared and they were used to evaluate subjective color sensibility image by 40 participants. As results, four different color sensibility image factors for naturally dyed silk fabric, 'delight', 'natural', 'modern' and 'attractive' were extracted. All of factors were significantly influenced by hue-tone, dyes, and mordants. Furthermore, by using color sensibility image adjectives and colors, multidimensional image scales were established, which leads to the conclusions that the results of this study help to design color sensibility-oriented naturally dyed fabric and apparel products.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.381-388
• /
• 2016

Biopolishing using cellulases was introduced in the production of cotton fabric in order to improve the quality of fabric environmental friendly and is commonly used in the textile industry. In this study, the application of a crude cellulase from Acanthophysium sp. KMF001, which was excellent for the saccharification of cellulose, on biopolishing was evaluated. The optimum treatment biopolishing condition was at $50^{\circ}C$ and pH 4.5 for 60 minutes with 10% crude cellulase of fabric weight. After the optimized biopolishing, the crude cellulase of Acanthophysium sp. KMF001 reduced the tensile strength of the tested cotton fabric less than a commercial cellulase. The appearance of the cotton fabric after the treatment of the crude cellulase of Acanthophysium sp. KMF001 was similar to the fabric after a commercial cellulase treatment. All these results support that the crude cellulase of Acanthophysium sp. KMF001 was a good biopolishing cellulase.