• Journal of the Korean Society for Railway
• /
• v.8 no.2
• /
• pp.195-201
• /
• 2005

Mode II interlaminar fracture behaviors of carbon fabric/epoxy composites, which are applicable to tilting train carbodies, was investigated by the ENF (End notched flexure) test. The specimens were made of CF3327 plain woven fabric with epoxy and a starter delamination at one end was made by inserting Teflon film with the thickness of 12.5$mu$m or 25.0$mu$m. The equation for mode II interlaminar fracture toughness was suggested based on the effective crack length from the compliance of load-displacement curve. Mode II interlaminar fracture toughness was evaluated for several types of the specimens. Also crack propagating behaviors and fracture surfaces were examined through an optical travelling scope and a scanning electron microscope.

• Textile Coloration and Finishing
• /
• v.22 no.3
• /
• pp.264-271
• /
• 2010

The purpose of this study was to investigate performance evaluation of absorbing and fast-drying fabric after washing. In the comparison of absorption and fast-drying properties, there was slight difference among the materials depending on thickness, weight, and fabric structure. Absorption speed of the materials depended on the frequency of washing which might be caused by modification of fabric structure or composition fiber due to friction during washing. The ability of fast-drying of the materials was gradually decreased with the increase of washing frequency, which might be caused by fatigue accumulation on inner fiber and structural change or destruction with friction during washing.

• The Research Journal of the Costume Culture
• /
• v.20 no.4
• /
• pp.475-484
• /
• 2012

The purpose of this study is to help to prevent daily noises by measuring the noise absorption coefficient of the non-woven fabrics and wallpapers which are commonly used in lining and noise absorption coefficient of lining curtain. Seven types of fiber materials for the interior decoration, one non-woven fabric for the wallpaper linings, and two types of textiles for curtain linings are used as the experimental materials in this study. The noise absorption coefficient of the noise absorbents were measured by using impedance tube. And the thermal transmittance were measured by using thermal transmittance tester. The results of this study are as follows; Observing the noise absorption efficiency of each experimental materials, the combination of fiber materials and linings, the noise absorption efficiency of cotton, polyester and silk were similar and for the experimental materials of flax, rayon, acrylic and nylon were resulted the similar noise absorption efficiency. The result of combination of fiber material and black fabric was highest among the combined linings. For the combination of fiber material and non-woven fabric, double layers of non-woven fabric resulted slightly higher noise absorption coefficient result than single layer of non-woven fabric. The thermal transmittance and the sound absorbents of experimental materials were affected by the thickness, density and layer of air of the experimental materials.

• Journal of Fashion Business
• /
• v.19 no.2
• /
• pp.23-35
• /
• 2015

In this study, the effect of shrink-resist treatment agent on the wool finishing, specifically anti-felting of wool product was studied. We aimed at providing preliminary data leading to the diversification of high-value added fashionable wool product. Two type of wool fabrics, dense and sheer, were employed. The fabric specimens were treated with solutions of shrink-resist treatment agent with wet pick-up rate 110%, 130%, and 150%, respectively, by using a padding mangle. The solution treated fabric specimens were then dried at room temperature first, at $90^{\circ}C$ for 15 minutes in a drying oven, and finally cured at $130^{\circ}C$ for 3 minutes. Cured wool fabric specimens were then subjected to a felting process. The physical and mechanical properties, including shrinkage rate along warp/filling direction, thickness at specified measurement pressure, drape stiffness, and air-permeability, were analyzed. After felting process, the shrinkage rates of wool fabric specimens, treated with shrink-resist treatment agent, were lower than those of control wool fabric specimens. The stiffness values of wool fabric specimens measured by using Flexometer were increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.10 no.1
• /
• pp.47-57
• /
• 1986

The purpose of this study is to investigate fatigue phenomema of woven fabric. In order to obtain the basic data which is available for predicting the fabric fatigue phenomena, the change of mechanical properties of woven fabrics caused by the wearing and the changes of mechanical properties of woven fabrics which were subjected to repeated tensile-shearing deformation using fabric testing machine has been investigated and compared. The fatigue of woven fabrics was examined with the value of basic mechanical properties of specimens measured by the KES-F fabric testing system and their hand value and wearing ability. The results were as follows. 1) The fatigue phenomena of woven fabrics by the wearing for 800 hours are different on the position of the body: On the portion of hip, the change of surface property was the greatest, bending hysterisis was greatly increased, thickness weight, stiffness, fullness shearing hysterisis were more increased than original fabric and T.H.V. was decreased. On the portion of knee, decreasing of tensile resilience and increasing of bending, shearing hysterisis were observed greater than any other part, and increasing of stiffness, crispness was more than original fabric. On the bottom area, the changes of mechanical property was comparatively small, H.V. and T.H.V. showed near the value of the original fabric. 2) By drycleaning most of mechanical properties showed the tendency to recover the value of the original fabric, but bending hysterisis and thickess were increased, tensile and com-pression resilience were decreased more than original fabric in all parts. 3) The fatigue phenomena caused by fabric fatigue testing machine were as follows. The decreasing of hystersis in the repeated deformation such as bending, shearing was appeared at the $10^2$ deformation, but with the increasing cycle, the tendency was slightly regained. Handle value was also appeared the lowest value at the $10^2$ deformation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.4
• /
• pp.129-142
• /
• 2013

Fabrics created unique features through the change in various ways depending on the elements including fabric structure, threads, thickness, weaving, patterns and processing. This study examined the difference between texture and image depending on components of fabrics. In order to understand the trend of components of fabrics, the actual components of fabrics was analyzed by year, using the women's apparel trend books, Nelly Rodi Fabrics and Promostyl Fabrics. This study analyzed Spring/Summer season and Fall/Winter season from 2002 to 2012. Frequency analysis, cross-tabulation analysis, multiple response cross tabulation analysis were implemented using SPSS 18.0. The followings are the analysis results. For fabric composition, Spring/Summer season used cotton fabric the most. Cotton fabric accounted for relatively high usage in 2005, 2007 and 2008. Fall/Winter season used wool the most in 2002, 2003, 2004 and 2005. In case of fiber blend by fabric composition, cotton was blended with other fibers in Spring/Summer season except wool. The fiber blending ratio of wool was the highest in Fall/Winter season. Wool was blended in most fabrics. More than two patterns were mixed for fabric patterns. The fabric patterns were applied the most in 2012. For fabric processing, the fabrics by sensitivity-functional processing were continuously used every year and the surface finish showed relatively high usage in 2002 and 2011. In conclusion, this study will build the systematic data for 11 years including fabric trends in the past. It can improve specialization, systematization and efficiency in fabric planning.

• Fashion & Textile Research Journal
• /
• v.12 no.1
• /
• pp.114-121
• /
• 2010

Denim is one of the most frequently used fabrics for blue jeans. After washing denim fabric frequently changes its size and color. Salespersons recommended that after purchasing blue jeans customers should dry clean them once before washing. The aim of this study was to investigate to what degree washing with a household washing machine and dry cleaning affected the dimensions and the color of denim fabric. The denim fabric shrank greatly after the first laundering in warp direction regardless of whether it had been dry-cleaned or not. However, it shrank little from the second to the tenth laundering and after each number of dry cleanings. The thickness of the denim changed in the same way as the shrinkage occurred when the number of launderings or dry-cleanings increased. Although the indigo came out of the denim into washing liquor, both of the $L^*$ values and the $b^*$ values of the laundered and the dry-cleaned denim fabrics were lower than those of the control fabric. Darkening of the fabric after washing attributed to the shrinkage in warp; specifically the deep-blue warp yarns more spaced on the fabric face and the back. The $L^*$ and $b^*$ values of the dry-cleaned fabric decreased less than those of the laundered. The value of $a^*$ increased much less than the other values. Staining of the white cotton fabric laundered with the denim fabrics became less as the number of launderings increased. The degree of staining from the dry-cleaned denim was much lower than that of the laundered fabric.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.3
• /
• pp.650-661
• /
• 2001

The purpose of this study is to suggest a guidance to select proper muslin through investigating fabric characteristics. The structural and physical properties of muslin and top fabric samples were tested by KES-FB system and other testers. And in order to examine the relation between fabric characteristics and the shape of garments, wearing tests were done with jackets made of those samples. As a result, bending rigidity(B), bending hysteresis(2HB), shear stiffness(G), shear hysteresis at=0.5(2HG), shear hysteresis at=5(2HG5), stiffness, cloth count/5cm, weight, thickness were extracted as the key factors affecting the appearance of garments. To have similar appearance, all of these should be counted. After standardizing, we calculate the variance between top cloth and muslin. And from this we could get the range that the proper muslin should be included. The ranges were as follows: Bending rigidity(B): within 0.024g.$\textrm{cm}^2$/cm(0.3$\sigma$); Shear stiffness(G): within 2.21g/cm.degree(1.3$\sigma$) Weight: within 9.33mg/$\textrm{cm}^2$(18$\sigma$); Thickness: within 0.20mm(1.8$\sigma$)

• Journal of Fashion Business
• /
• v.13 no.1
• /
• pp.82-90
• /
• 2009

This research was made to manufacture the fabric for interior uses by spinning a low melting mono 4 denier PET staple fiber with a soluble 1.4 denier fine PET fiber. The blended yarn has a thickness ranging from 10's to 14's, and the soluble PET fine fiber was dissolved to make a pore in the polymer. Thereby a snap property was decreased and a resilience property was improved to be suitable for a functional synthetic leather. In order to attain the optimum condition, a mechanical property according to fineness, and mixing ratio of low melting polymer, warp density, weft density and blending ratio, and a heat contraction ratio according to blending ratio were experimented. The warp density, 220 T/inch of fine denier PET and the weft density, 64 T/inch of thick denier PET were generated to 4/4 both twill weave fabric having constant tensile property and thickness.

• Fashion & Textile Research Journal
• /
• v.13 no.6
• /
• pp.990-995
• /
• 2011

This study analyzed the effects of the knit stitch type, fiber composition, and yarn thickness on the mechanical properties of knitted fabric. The results were as follows: The course density was the highest in the case of the rib stitch. On the other hand, the wale density was the highest in the case of the float stitch. The thickness was the highest in the case of the rib stitch. The same results were obtained even for different fiber compositions and yarn thicknesses considered in this study. The burst strength of wool knit fabric was higher than that of A/W knit fabric. The stiffness was the lowest in the case of the plain stitch. The same results were obtained even for different fiber compositions and yarn thicknesses. The pilling properties were excellent for all knit stitches, fiber composition, and yarn thicknesses as pilling degree : 5. The air permeability decreased in the following order : rib > plain > float stitch. The same results were obtained even for different fiber compositions and yarn thicknesses. The heat retention rate decreased in the following order : rib > float > plain stitch. The same results were obtained even for different fiber compositions and yarn thicknesses.