• 패션비즈니스
• /
• 제13권3호
• /
• pp.136-148
• /
• 2009

The phenomenon of the shrinkage of silk fibers induced by inorganic salts including LiBr, $Ca(NO_3){_2}$, and $CaCl_2$, has been studied up to the present as one of the finishing methods of silk. It is expected that the shrinkage phenomenon may greatly contribute to the realization of the high sensibility of silk fibers. Especially the shrinkage enables the expression of three-dimensional appearance of silk fabrics along with the improvements in dimensional stability, resilience in stretching, and comfort. Numerous theoretical studies on the contraction phenomenon by $Ca(NO_3){_2}$ have been conducted so far. These studies have focused mostly on the silk fibers. It is difficult to find studies on silk fabrics. The negative aspects of the finishing are such as strength drop, yellowish discoloration, and fiber damage. These should also be considered as well as the positive aspects. In this study, the phenomenon of salt shrinkage is diversely reviewed by applying $Ca(NO_3){_2}$ solution for the silk fabrics as objects. The changes in the air permeability, thickness, and color were investigated with focus on the shrinkage of the silk fabrics according to the changes in treatment conditions. Some findings from this study are as follows: Within short period of time at the initiation of salt shrinkage, the salt shrinkage proceeds effectively. In the case of concentration of 47.4%, or 46.3% of $Ca(NO_3){_2}$ solution, appropriate treatment time seems to be 20seconds, or $2{\sim}8$minutes, respectively. Excessive shrinkage is obtained when lower liquor ratio is adopted. As a result, the condition is acting extremely disadvantageously against the thickness and yellow discoloration aspects.

• 한국융합학회논문지
• /
• 제12권11호
• /
• pp.119-126
• /
• 2021

본 의료기관에서 사용되는 방사선 차폐복은 납당량 0.25 mmPb를 기준으로 제시하고 있다. 그러나 신체 각 부위별 감수성을 고려하고 사용자의 활동성을 보장할 수 있는 동시에 정밀한 방어가 가능한 차폐복 제작에 대해 연구하고자 한다. 친환경 차폐 재료를 기반으로 제작하여 기존 납 Apron의 중량 문제와 환경 문제를 해결하는 동시에 두께로 납당량과 동일한 차폐성능을 제시하고자 하였다. 제작된 차폐시트의 원단은 납당량 0.12 mmPb부터 0.32 mmPb까지 차폐시트의 두께로 조절하는 카렌더 공정을 통해 제작하였다. 각 신체 부위별 감수성을 고려한 차폐복을 제작하여 의료기관에서 상시 착용하고 있는 대상자를 통해 사용성평가를 실시하였다. 차폐복을 착용한 후 활동성이 좀 더 증가하였다는 의견이 많았으며, 무게는 0.26kg을 줄였다. 향후에는 의료기관의 종사자의 활동성을 고려한 차폐복 디자인 개선 노력이 필요할 것으로 사료된다.

• 한국염색가공학회지
• /
• 제28권2호
• /
• pp.109-117
• /
• 2016

Synthetic fabrics, such as nylon and polyester, were dyed with persimmon juice by using a padding mangle repeatedly. The mechanical properties of these synthetic fabrics were analyzed using the Kawabata evaluation system. The following findings were obtained from this investigation. As the number of repetitions of padding dyeing increased, the tensile energy per unit area and the tensile resilience of synthetic fabric remained almost unchanged, whereas the linearity of the load-extension curve of the synthetic fabrics increased. As the number of padding repetitions increased, the synthetic fabrics dyed with persimmon juice exhibited increases in thickness and weight. As the number of repetitions of padding treatment with persimmon juice increased, the values of stiffness, anti-drape stiffness, fullness, and softness also increased, whereas the flexibility with soft feeling, crispness, and scrooping sensation significantly decreased. The amount of coated persimmon juice on the surface of the fabrics increased after three repetitions of padding treatment with persimmon juice. Nylon and polyester fabrics were dyed evenly with persimmon juice treated using a padding mangle.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.50-61
• /
• 2007

The structural stiffness, strength and stability on the bodyshell and floor structures of the Korean Low Floor Bus composed of laminate, sandwich panels and metal reinforced frame were evaluated. The laminate composite panel and facesheet of sandwich panel were made of WR580/NF4000 glass fabric/epoxy laminate, while aluminum honeycomb or balsa was applied to the core materials of the sandwich panel. A finite element analysis was used to verify the basic design requirements of the bodyshell and the floor structure. The use of aluminum reinforced frame and honeycomb core was beneficial for weight saving and structural performance. The symmetry of the outer and inner facesheet thickness of sandwich panels did not affect the structural integrity. The structural strength of the panels was evaluated using Von-Mises criterion for metal structures and total laminate approach criterion for composite structures. All stress component of the bodyshell and floor structures were safely located below the failure stresses. The total laminate approach is recommended to predict the failure of hybrid sandwich composite structures at the stage of the basic design.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.21-25
• /
• 2008

In this paper, the temperature history and the strength development of concrete corresponded to various bubble sheets layer and curing temperature. Based on the results, In case of the test temperature of -5℃, concrete subject in the exposure condition, result in a frost damage at initial stage by a fall of below zero temperature. In case of the combination of PE film and non woven fabric was after 36 hour, and combination of bubble sheet over double, a tremendous insulating effect of bubble sheet over double is confirmed due to the temperature of concrete fall of below zero temperature after 60 hours. Meanwhile, regarding the -15℃ of temperature, special measure for insulation curing is necessary to secure stability against early frost damage because frost damage was not affected by the lapping thickness of bubble sheet subjected to severe cold weather condition.

• 한국의류산업학회지
• /
• 제1권4호
• /
• pp.358-362
• /
• 1999

두께와 무게가 다양한 23종의 직물을 대상으로 최대하중 10, 20, 35, 50, 70 $gf/cm^2$의 5종류 다양한 조건 하에서 압축-두께곡선을 측정함으로써 저응력에서 압축특성과 두께, 태를 분석하였다. 최대하중이 증가함에 따라 LC(curve linearity)는 증가하였으며 WC(compressional energy)는 감소하였다. 또한, 최대하중에 따라 RC(compressional resilience)는 변화가 없었다. LC와 WC는 직물이 두꺼울수록 크게 나타났으며 RC는 중간 두께의 직물에서 가장 크게 나타났다. 최대하중 20 $gf/cm^2$에서 측정한 LC와 WC가 주관적 태 평가결과와 가장 상관이 깊었으며 Speamnan's rho는 .86과 .82였다.

• 한국의류학회지
• /
• 제13권4호
• /
• pp.388-399
• /
• 1989

The purpose of this study was to investigate the effects of garment design, fabric type and the presence of lining on the thermal insulation value $(I_{cle}\;and\;I{cl})$ and clothing area factor $(f_{cl})$ of skirts. A standing, electrically heated thermal maninkin was used to measure the insultation value of eighty skirts-five skirt styles with eight different fabrics, with and without lining. The air temperature of the chamber was set at $22.2^{\circ}C{\pm}0.5^{\circ}C$ , air velocity was limited to less than 0.1 m/s, and relative humidity was approximately $50\%$. The results are as follows: 1) The Ic, values of gathered skirt and flared skirt, which had high $f_{cl}$ values, were significantly higher than those of other skirts, though the highest $I_{cle}$ value among five styles wer pegged skirt. 2) Insulation values of various skirts were more relevant with physical properties such as thickness, air permeability, and thermal transmission of the materials rather than fiber content. 3) The addition of lining made significant difference in the insulation values of skirts and the differences of gathered and flared skirt were significantly higher than those of othere types of skirts.

• 한국의류학회지
• /
• 제22권8호
• /
• pp.1141-1149
• /
• 1998

Tencel fabrics were treated with NaOH, mechanically prefibrillated, and hydrolyzed by cellulase. Softner was applied to improve hand of the treated Tencel fabrics after prefibrillation and cellulase treatment. Kawabata's Evaluation System for Fabrics(KES-FB) was used to evaluate effects of NaOH pretreatment, prebifrillation, and cellulase and softner treatments on fabric hand of the treated fabrics. Primary hand values of women's medium thick fabrics such as KOSHI, NUMERI, FUKURAMI, and SOFUTOSA, and total hand values were evaluation parameters. As the treatments of prefibrillation, cellulase, and softner progressed, values in bending and shearing properties decreased and softness and elasticity were imparted to the treated fabrics. Specifically, compressional linearity, compressional energy, and thickness of the treated fabrics increased by prefibrillation, providing bulkiness to the treated fabrics. Values indicating surface properties increased owing to fibrils formed by prefibrillation treatment, but removal of fibrils by cellulase treatment enhanced smoothness. As the fabrics were exposed to various treatments such as NaOH pretreatments, prefibrillation, and cellulase and softner treatments, NUMERI, FUKURAMI, SOFUTOSA, and total hand values increased with the exception of KOSHI, Consequently, the treated fabrics became softer, smoother, and more elastic. Especially, the NaOH pretreatment provided superior SOFUTOSA to Tencel fabrics.

• 대한기계학회논문집A
• /
• 제31권8호
• /
• pp.870-879
• /
• 2007

In this study, various damage modes in bending unimorph piezoelectric composite actuators with a thin sandwiched PZT plate during bending fracture tests have been evaluated by monitoring acoustic emission (AE) signals in terms of waveform and peak frequency as well as AE parameters. Three kinds of actuator specimens consisting of woven fabric fiber skin layers and a PZT ceramic core layer are loaded with a roller and an AE activity from the specimen is monitored during the entire loading using an AE transducer mounted on the specimen. AE characteristics from a monolithic PZT ceramic with a thickness of $250{\mu}m$ are examined first in order to distinguish different AE signals from various possible damage modes in piezoelectric composite actuators. Post-failure observations and stress analyses in the respective layers of the specimens are conducted to identify particular features in the acoustic emission signal that correspond to specific types of damage modes. As a result, the signal classification based on waveform and peak frequency analyses successfully describes the failure process of the bending piezoelectric composite actuator exhibiting diverse failure mechanisms. Furthermore, it is elucidated that when the PZT ceramic embedded actuators are loaded mechanical bending loads, the failure process of actuator specimens with different lay-up configurations is almost same irrespective of their lay-up configurations.

• 한국의류학회지
• /
• 제41권3호
• /
• pp.468-486
• /
• 2017

In this study, three kinds of wearable fashion prototypes were developed using 3D printers with the goal of developing a practical production method for daily clothes. Prototypes were modeled using Rhinoceros software and developed using FDM 3D printers and TPU filaments. The results of this study are as follows. First, it confirmed the possibility of FDM-type entry-level 3D printers as a tool to develop wearable fashion products. Second, TPU filaments that are soft and ductile are highly likely to be used as a clothing material. Third, patterns designed through the 3D modeling process can be sampled directly to a 3D printer and easily corrected and supplemented. Fourth, it was confirmed that TPU prints of about 1.00mm thickness can be sewn with fabric using sewing machines through the development of 'Prototype 1' and 'Prototype 2'; in addition, hand stitching is also possible. Fifth, as in the case of 'Prototype 3', it is possible to fabricate a garment fit enough to the body if the clothing configuration is designed to connect the basic module using TPU filaments. In the future, the development of wearable fashion prototypes using various materials and 3D printing technology will help diversify everyday clothes.