• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.176-181
• /
• 2003

Theoretical weavability limit relationships of fabrics from regular warp yarns and fancy filling yams with thickness variation in shuttleless weaving are reviewed. The relationships correlate maximum warp and filling cover factors, warp and filling yarn characteristics, the distribution of thick and thin places of filling yarn over the fabric surface, and the warp and filling weave factor. The research considers single filling feeder and multiple feeders cases. Additionally, comparisons between the weavability limit of regular yarns and fancy yams in shuttle and shuttleless weaving are given.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.317-320
• /
• 2006

In order to determine a minimum thickness of the pultruded GFRP panel as a structural member, some experimental studies were performed. GFRP tubes with 2mm, 4mm, 6mm thickness were manufactured by pultrusion process. First, coupon tests for finding mechanical properties were carried out. Comparisons between test results and analysis results based on classical laminate theory showed large differences in case of 2mm, 4mm specimens. The reason is that it is difficult to apply appropriate pultruding force and keep layered stitched fabric flat for the pultrusion process of complex shaped FRP member with small thickness. On the consequence, we decide 6mm as a minimum thickness of FRP member. Second, 4-point bending tests were performed and the results with compared with numerical analysis. The behavior of FRP tube can be exactly predicted by numerical analysis if buckling analysis is included.

• Science of Emotion and Sensibility
• /
• v.20 no.2
• /
• pp.117-126
• /
• 2017

In this study, moisture transport characteristics for the woven and knitted fabrics made of 8 kinds of fiber materials using MMT (moisture management tester) were measured and discussed with the Bireck bt MMT and water evaporating rate (WER) measuring methods, which are vertical moisture transport methods. In addition, the drying property by MMT of the eight kinds of specimens was compared and discussed with the results measured by the vertical drying measurement. MMT experimental result which is horizental moisture transport appeared to be similar to the result of the Bireck method, which is the vertical moisture transport experiment. Absortion time measured from drip method of the fabrics made of the bamboo, linen, and cotton/nylon composite fabrics was short and thus they showed best wicking property, which was attributed to the low contact angle on the fabric surface and high porosity of the fabrics due to the staple yarn structure composed of the hydrophilic staple fibers. In drying property of the fabric specimens by MMT, maximum absorption radius of the dry-zone knit and bamboo woven fabrics were the highest and they showed the best drying property, which was a little different result compared with vertical drying measurement method. Half time of the drying rate in the MMT method was highly correlated with the fabric thickness and saturated moisture absortion rate and their regression coefficients were 0.9 and 0.88, respectively. This means that the knitted and woven fabric design technology for retaining good wicking and drying properties of the fabrics with thin fabric thickness is very important for obtaining high functional wear comfort fabrics. In addition, wicking and drying properties of the fabrics made of different fiber materials and with different yarns and fabric structures showed different results according to the measuring methods.

• Analytical Science and Technology
• /
• v.30 no.5
• /
• pp.270-278
• /
• 2017

The absorption of blood onto the surfaces of white cotton, polyester, rayon, and nylon fabrics was studied. Different categories of fabrics (woven and knitted) with diverse thickness, were manually folded twice to obtain four fabric layers, and $100{\mu}L$ of human blood was dropped onto the surface of the fabrics. The amount of blood that penetrated the fabric layer and the shape of bloodstain observed on the fabrics were influenced by the chemistry, thickness, and texture of the fabric. The blood bearing fabrics were left to dry for 3 days, washed by hand using tap water, and Lumiscene was then sprayed onto the fabrics to enhance the latent bloodstain for comparison of the shape of the bloodstain before and after washing by hand. The features of the bloodstain after washing varied greatly with the recipient fabrics. Additionally, stronger luminescence was observed at the surface where the blood was deposited compared to the background. However, it was confirmed that physical contact during the washing can deform the original shape of the bloodstain. The effect of the drying time on the bloodstain after hand washing was also studied. $100{\mu}L$ of blood was dropped on the surfaces of the fabrics and dried for 0, 1, 12, 24, 72 h, and 7 days, then washed by hand, before the bloodstain was enhanced with Lumiscene. The results of this experiment indicated that the increased drying time induces stronger chemiluminescence of Lumiscene. However, after drying of the bloodstain for 7 days, the luminescence of the bloodstain was decreased at the blood deposited site and increased around the blood deposited site.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.149-156
• /
• 2021

The mechanical properties of a woven fabric made of SiC (silicon carbide) fibers were determined in this study using the KES-FB system. The woven fabric is used in high heat settings above 1500℃. Composite spun yarns were used to create SiC fibers. By analyzing the wearing properties, we studied the prospect of using the textiles as fire-retardant work clothes. Mechanical properties determine the wearing attributes. Therefore, the tensile linearity (LT), tensile resilience (RT), and shear stiffness (G) values of the fabric varied according to the yarn type (filament or spun yarn). The thickness, weight per square meter, and density of the fabric were found to have an effect on the shear hysteresis (2HG) and compression resilience (RC) values. In terms of wearable clothing qualities, the fabric qualities of the SiC composite yarn demonstrated the highest ratio of compressive energy to thickness (WC/T), which indicates bulkiness. The fabric manufactured from SiC composite yarns passed the KFI criteria for carbonation length and cumulative flame time in the flame-retardant test. Therefore, we discovered that the material can be used as a fire-resistant work cloth.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.21 no.3
• /
• pp.1-11
• /
• 2019

This study examined the cause of the phenomenon of shrinkage in machine-embroidered fabrics, specifically those made of thin and pliable fabrics. Four woven fabrics and two knitted fabrics were selected as samples for analysis. The fabrics selected were silk organza, flax linen, polyester chiffon, cotton batiste, polyester raschel mesh, and cotton jersey. The thickness and drapability of the fabrics were observed and the shrinkage of the various types of embroidered fabrics produced using satin & step stitch techniques were measured. Moreover, the correlation between the shrinkage of the machine-embroidered fabrics and the drapability of the original fabrics was analyzed. Also, the colorfastness of six embroidery yarns was determined. The results of the study are as follows: first, the shrinkage of machine-embroidered fabrics increased at a greater rate than in embroidered knitted fabrics as compared to rates in embroidered woven fabrics. Moreover, in terms of stitch techniques, there was a greater shrinkage rate when satin stitch was applied compared to step stitch. Second, the shrinkage rate of machine-embroidered fabrics decreased when a stabilizer was fused onto the fabric. The shrinkage rate also decreased for fabrics when fused with paper stabilizer compared to those without it, and the rate decreased at a greater amount with paper stabilizer as compared to alginate film. Third, since there was a strong correlation between the shrinkage rate of the embroidered fabric and the drapability ratio of the original fabric, it was generally the case that the more pliable the fabric was, the greater the shrinkage rate was when the fabric was embroidered. Fourth, while the embroidery yarns mainly used in machine-embroidery presented an overall excellent level of colorfastness, there was slight color migration of level 4 to level 5 when using viscose rayon.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.5
• /
• pp.23-34
• /
• 2003

This study was carried out to investigate the mechanical properties of fabric E-glass fiber reinforced laminated timber. Specimens used to Korean red pine(Pinus densiflora) and Japanese larch(Larix kaemferi). Fabric E-glass fiber was inserted in the solid wood with aqueous polymer-isocyanate resin(MPU-500). The results were as follows: 1. Aqueous polymer-isocyanate resin(MPU-500) was good resin to manufacture laminated timber. specially, it was satisfied to property standard of construction laminated timber(KS F 3021) except for two ply glass fiber. 2. Bending and shear strengths of solid wood inserted with fabric glass fibers were not different from control solid wood. But, proportional limit bending stress was increased following the number of fabric glass fibers. Therefore, it was considered that to improve the bending and shear strength of fabric glass fiber reinforced laminated timber, the glass fiber thickness and its mesh should be modified to fitness following working conditions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.6
• /
• pp.853-863
• /
• 1999

the change of physical properties (thickness, weight, air permeability) and mechanical properties(abrasion resistance breaking load and displacement) of samples were determined after heat exposure by a RPP tester. The effect of exposure time and heat flux intensity on the changes and the relationship between physical properties and mechanical properties were investigated. FR treated cotton Kevlar/PBI and Nomex with different structureal characteristics were chosen for specimens. The changes of physical properties and mechanical properties were calculated based on their initial values before heat exposure. The longer exposure time and the high heat flux intensity the more changes of those properties. Heat flux intensity was more effective on the changes, The showed to be affected by an interplay of shrinkage and pyrolysis products loss. The changes of thickness and abrasion resistance showed to be higher for plain weave fabric and those of air permeabiliyt and breaking load and displacement for twill weave fabric. While FR treated cotton which have high RPP value experienced serious and detrimental changes after heat exposure Kevlar/PBI which has low RPP value showed no high changes. In conclusion it could be confirmed that when total performance of a protective clothing is estimated retention capability of physical and mechanical properties after heat exposure as well as RPP value must be considered.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.3 s.31
• /
• pp.295-303
• /
• 1989

This study is to measure the thermal resistance of 7 types of Parka of different materials with thermal manikin and to compare their effects on physiological responses & subjective wear sensations. Following are the results obtained from the experiments 1) From the thermal manikin experiment, i) As an outer layer, although not significant, water proof fabric was warmer than water proof-vapor permeable fabric. ii) In case of insulating material, down was better for thermal resistance than polyester wadding of the same thickness. Moreover, as the down was thicker, it had more efficiency in thermal resistance. However, the marginal efficiency of thickness was found to be decreasing. 2) From the male-subject experiments, i) Chest temperature, mean skin temperature & microclimate temperature showed the same results on thermal resistance as those of the thermal manikin experiment. ii) Only during rest periods, there was a significant difference among 5 insulating materials in the sense of microclimate humidity. The almost same conclusion was obtained from the above experiments. Even the outer layer did not significantly affect thermal resistance & subjective wear sensation, insulating materials had a significant influence upon them. But in case of 3.5 cm down, it gave less comfortable than that of the thinner. Therefore the optional one for the best comfort & thermal resistance among 7 combinatins is the outer layer of water proff-vapor permeable & insulating material of 2.1 cm down.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.3
• /
• pp.287-297
• /
• 1994

The purpose of this study is to investigate the Improvement of fiber surface, tenacity & elogation, fabric counts, thickness, handle, moisture regain, static voltage, handle, dyeability when polyester fabrics are treated with NaOH solution adding quartemary ammonium salt (Benzyl dimetyl dodecyl ammonium chloride . BDMDAC) The results are as follows. I. In regard to the method of processing VET, when the PET fabrics are alkaline-hydrolyzed adding BDMDAC, the weight loss of PET fabrics increased remarkably to the increse of BDMDAC concentration than when they are treated only in NaOH solution. When PET fabrics are alkaline-hydrolyzed the amount of BDMDAC as the catalyst is proper lg/1 II. The change in physical & chemical properties of alkaline-hydrolyzed PET fabrirs. 1. As the amount of the weight loss on PET fabrics increased, the void space of the PET yale increased but tenacity & elongation and thickness decreased. 2. The fabric counts of PET increased due to shrinkage by alkaline-hydrolydzing. 3. As the amount of of the weight loss on PET fabrics increased. NUMERI, FUKURAMI, increaseed and KOSHI decreased and Total hand value(T.H.V) in all cases increaseed. When the weight Ioss is 30.9% T.H.V. is best. 4. Moisture regain of PET fabrics a little increased by alkaline-hydrolyzing treatment. As the weight loss increased, static voltage is decreased. 5. The last dye absorption is different according to the degree of the Affinity. In regard to the difference of dye color, the dyestuff of low molecular weight dyed for deep color.