• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.23-30
• /
• 2006

The bending properties, wrinkle resistance, and fabric retention behaviors of cotton knitted fabrics in the wale and course directions were studied for their dependence upon resin finishing, knit structure, and washing cycles. Stiffness, wrinkle recovery angles, and dimensional stability were investigated before and after resin finishing and laundering. It has been found that any change in the physical properties of the knitted fabrics with respect to knit structure and fabric directions are related to accompanying modifications to the state of the fiber properties. The decrease of fabric shrinkage rates and wrinkle recovery properties from increasing laundering cycles is related with resin incorporated on the fiber surface. This study shows that resin finishing on knitted fabrics can be performed only to improve fabric retention properties with reduced wrinkle recovery properties.

• 한국의류학회지
• /
• 제44권1호
• /
• pp.159-174
• /
• 2020

We selected 100% cotton fabric, 100% Hanji yarn fabric and two kinds of cotton / Hanji yarn blended fabrics and fused them with three kinds of interlinings in order to examine changes to the physical properties and the post-adhesion physical properties of Hanji yarn blended fabrics. Changes in KES values were examined after fusing. First, EM, B, 2HB, MMD values of Hanji yarn blended fabrics were higher than cotton fabric, and LT, RT, G, 2HG, LC, WC values of cotton fabric were higher than Hanji yarn blended fabrics. Tensile recovery was lowered, bending stiffness was increased, and shear stiffness was lowered when Hanji yarn was mixed. Second, the KES value of LT, B, 2HB, G, 2HG, LC, WC increased after fusing, while the EM, MMD values decreased. SMD was shown to decrease or increase depending on the type of fabric. The adhesive effect on bending stiffness and shear stiffness due to the mixing of Hanji shows a different tendency in the comparison of α_B and α_G.

• 한국염색가공학회지
• /
• 제16권4호
• /
• pp.36-44
• /
• 2004

This research surveys the differences of fabric mechanical properties according to the different looms and the fabric positions with relation to warp and weft weaving tensions on the Picanol and Omega looms respectively. For this purpose, the grey fabrics woven in the previous paper are processed in dyeing and finishing processes, and the processing shrinkages are measured on each processes such as dryer, scouring, pre-set, dyeing and final-set using the fabric density and width. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft weaving tensions of the two looms and the variations of the fabric mechanical properties according to the fabric positions are also discussed. In addition, the fabric thickness according to the fabric positions such as right, left selvedges and center of the fabrics is also measured and discussed with the characteristics of the Picanol and Omega looms.

• 패션비즈니스
• /
• 제8권6호
• /
• pp.1-14
• /
• 2004

On the basis of garment spatial configuration technology, the correlation of fabric properties and garment modeling was studied in this paper. With abundant experimental data, practical modeling and the judgment of fabric properties and physical shape, we analyzed the change rules that restricting all kinds of parameters of fabric properties and garment modeling, and discussed the relation of wavy modeling and all correlated factors of fabric properties. The result showed the basis of choosing fabric for different style garment, which would help designers choosing fabric for modeling design or structure design.

• 패션비즈니스
• /
• 제13권3호
• /
• pp.86-98
• /
• 2009

The fashion industry saw the emergence of environment-friendly and natural fabric materials recently. The naturalism trend has established sectors in the textile and fashion industry also. Ramie and hemp have long been favored fabric materials in Korea especially for summer. The hand-related mechanical/physical properties of the fabric specimens were analyzed using a fabric objective measurement system, KES(Kawabata Evaluation System). Subjective evaluation was also implemented based on a series of selected adjectives. Studies on natural dyeing methods are important since the establishment of scientific approach is needed in terms of environment and human safety along with the reproduction of traditional natural dyeing methods. In this study, linen, ramie, hemp, and cotton/polyester/linen union fabric specimens were used for the natural dyeing using Rubia akane Nakai with the mordant of gallnut. ${\Delta}E$ values of dyed fabric specimens, mordanted and dyed once using Rubia akane Nakai, increased significantly compared to those of repeatedly dyed fabric specimens without mordanting.

• Fibers and Polymers
• /
• 제6권1호
• /
• pp.28-34
• /
• 2005

The purpose of the research was to examine the effect of three different levels of enzyme treatment on the physical characteristics and the end-use suitability of the lyocell fabrics made with four different types of commercial wood pulp. The appropriate enzyme concentration for obtaining an optimum as well as consistent physical characteristics and fabric hand trait was 3 g/l for the concentration levels tested in the present investigation. Weight loss was more affected by higher enzyme con­centration than other physical properties. H2 was least affected by enzyme treatment for all three physical properties and fab­ric hand. 5 g/l concentration exhibited little difference from 3 g/l in the physical characteristics, whereas the KES-FB values indicated a significant loss of fabric hand in most PHV s with the 5 g/l concentration level. Among different garment parame­ters, all four fabric types were relatively inappropriate for the men's slacks (MS) fabric due to the lower hand value of koshi required by the MS parameter. However, despite the relatively low koshi values, high fukurami values required for men's dress shirt (MWDS) resulted in the highest THV among the four garment parmeters. The four fabric types, which represent the usage of four different wood pulps, in general seem to exhibit a higher applicability to women's winter thin dress (WWTD) than women's winter suit (WWS) garment parameter.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.182-190
• /
• 2021

The purpose of this study is to provide the dyeing and physical characteristics of napped knit fabrics composed of latent crimped yarn. The K/S values, dyeing fastness, thickness, bulkiness, and shrinkage characteristics of three knit fabrics were investigated. The original knit fabric (SK) was composed of 1ply latent crimped yarn (75/36) in the ground and PET DTY (70/100) in the pile loop, in order of napped process the napped knit fabric (SN) was napped SK fabric. In order to compare of latent crimped yarn content, the last knit fabric (DN) was napped 2ply latent crimped yarn were included in the same structure of SK. Dyeability of three knit fabrics was similar but the shrinkage properties of DN fabric were significant different. The bulkiness shows a tendency to increase the bulkiness as increasing the dyeing temperature, and the bulkiness of the SN was higher because of the napping process and optimal content of latent crimped yarn.

• 한국의류학회지
• /
• 제34권9호
• /
• pp.1567-1580
• /
• 2010

This study investigates the effects of visual texture on color emotion and establishes prediction models for color emotion by both physical color properties and visual texture characteristics. A variety of fabrics including silk, cotton, and flax were colored by digital textile printing according to chromatic hue and tone combinations that are evaluated in terms of color emotion. Subjective visual texture ratings are also obtained for gray-colored same fabrics to those used in color emotion tests. As a result, fabric clusters by visual texture factors showed significant differences in color emotion factors that are primarily affected by physical color properties. Finally prediction models for color emotion factors by both physical color properties and visual texture clusters were established, which has a potential to be used to explain color emotion according to the visual texture characteristics of fabrics.

• 한국염색가공학회지
• /
• 제16권5호
• /
• pp.54-61
• /
• 2004

This research surveys the differences of fabric mechanical properties with the different looms and the fabric positions according to the warp and weft yarn tensions on the Vamatex and Omega-Panter looms respectively. For this purpose, the grey fabrics woven by PET filament using two test looms are dyed and finished. The processing shrinkages are measured on each processes such as dryer, scouring, pre-set, dyeing and final-set using the fabric density and width. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft yarn tensions of the two looms and the fabric positions. In addition, the fabric thickness according to the fabric positions such as right, left selvedges and center of the fabrics is also measured and discussed with the characteristics of the Vamatex and Omega-Panter looms.

• 한국염색가공학회지
• /
• 제11권4호
• /
• pp.31-38
• /
• 1999

The purpose of this study is to develop multifunctional fabric that has improved antimicrobial activity and reduction rate of gas by treatment of mixture of chito colla and crosslinking material for polyester. The surface morphology of treated PET fabric was studied by scanning electron microscopy(SEM). The properties of the PET fabric, such as antimicrobial activity, whiteness, moisture regain, water absorption and static voltage, and handle were investigated. Antimicrobial activity of treated PET fabric was proved 99%. The surface of treated PET fabric showed harshness and irregularity. The whiteness of treated PET fabric on the baking condition was decreased as time and temperature was increased. The moisure regain of treated PET fabric equally was maintained. Water absorption and static voltage of treated PET fabric were improved. KOSHI of treated PET fabric was increased compared with the untreated PET fabric H/W of treated PET fabric was improved compared with the untreated PET fabric and 2HB/B of treated PET fabric were reduced.