Textile Coloration and Finishing (한국염색가공학회지)

The Korean Society of Dyers and Finishers (한국염색가공학회)
권호 표지

Effects of Weaving Machine Characteristics on the Physical Properties of PET Fabrics (IV)

직기 특성이 PET직물 물성에 미치는 영향(IV)

  • 김승진 (영남대학교 섬유패션학부) ;
  • 진영대 (영남대학교 섬유패션학부) ;
  • 강지만 (영남대학교 섬유패션학부) ;
  • 정기진 (영남대학교 섬유패션학부)
  • Published : 2004.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

This research surveys the differences of fabric mechanical properties with the different looms and the fabric positions according to the warp and weft yarn tensions on the Vamatex and Omega-Panter looms respectively. For this purpose, the grey fabrics woven by PET filament using two test looms are dyed and finished. The processing shrinkages are measured on each processes such as dryer, scouring, pre-set, dyeing and final-set using the fabric density and width. The mechanical properties of the finished fabrics are measured and discussed with relation to the warp and weft yarn tensions of the two looms and the fabric positions. In addition, the fabric thickness according to the fabric positions such as right, left selvedges and center of the fabrics is also measured and discussed with the characteristics of the Vamatex and Omega-Panter looms.

Keywords

References

  1. S. J. Kim, D. L. Kim, S. K. Kim, J. W. Park, C. W. AIm and J. K. Lee, Effects of Yam Condition and Process Parameters on Physical Properties of Worsted Fabric, J. Korean Fiber Soc., 27, 696(1990)
  2. S. J. Kim, A. G. Oh, D. H. Lee and D. H. Chang, Fabric Geometry and Its Mechanical Properties, J. Korean Fiber Soc., 30, 89(1993)
  3. S. J. Kim, A. G. Oh, D. H. Cho, D. H. Chang and J. S. Song, Study on Correlation between Fabric Structural Parameter and Processing Shrinkage of Polyester Woven Fabric, J. Korean Fiber Soc., 32, 480(1995)
  4. S. J. Kim, A. G. Oh, D. H. Cho, D. H. Chang and J. S. Song, Study on Correlation between Mechanical Properties and Warp Density of Polyester Woven Fabric, J. Korean Fiber Soc., 32, 488(1995)
  5. S. J. Kim, D. H. Cho, D. H. Chang, M. S. Lee, H. J. Lee and S. K. Kim, Effect of Textile Processing and Fabric Structural Parameters to the Physical Properties of New Synthetic Fabrics, J. Korean Fiber Soc., 32, 760(1995)
  6. S. J. Kim, Y. D. Jin, J. M. Kang, Effects of Weaving Machine Characteristics on the Physical Properties of PET Fabrics (III), J. Korean Soc. Dyers & Finishers, 16, 278-283(2004)