• 한국염색가공학회지
• /
• 제24권4호
• /
• pp.296-304
• /
• 2012

For development of dyeability, the cotton fabric was dyed repeatedly with persimmon juice by padding mangle. We evaluated the mechanical properties and hand value by Kawabata Evaluation System, and observed the change of surface morphology. The results obtained from this study were as follows. With the increase of repeating padding times of dyeing, the linearity of load-extension curve and tensile energy per unit length of the cotton fabric were increased, but the tensile resilience of fabric was decreased. The value of shear stiffness and shear hysteresis were increased. Also compression resilience and linearity of compression thickness curve were increased. The cotton fabric dyed with persimmon juice had shown the thickness and weight increase as the number of padding increase. As repeating times of dyeing with persimmon juice were increased, among the 6 hand values, the item of stiffness, anti-drape stiffness, fullness and softness were increased, while flexibility with soft feeling and crispness were greatly decreased. The amount of coated persimmon juice on the surface of the fabric was gradually increased as the padding times of dyeing. And cotton fabrics were dyed evenly with persimmon juice by padding mangle.

• 패션비즈니스
• /
• 제19권2호
• /
• pp.23-35
• /
• 2015

In this study, the effect of shrink-resist treatment agent on the wool finishing, specifically anti-felting of wool product was studied. We aimed at providing preliminary data leading to the diversification of high-value added fashionable wool product. Two type of wool fabrics, dense and sheer, were employed. The fabric specimens were treated with solutions of shrink-resist treatment agent with wet pick-up rate 110%, 130%, and 150%, respectively, by using a padding mangle. The solution treated fabric specimens were then dried at room temperature first, at $90^{\circ}C$ for 15 minutes in a drying oven, and finally cured at $130^{\circ}C$ for 3 minutes. Cured wool fabric specimens were then subjected to a felting process. The physical and mechanical properties, including shrinkage rate along warp/filling direction, thickness at specified measurement pressure, drape stiffness, and air-permeability, were analyzed. After felting process, the shrinkage rates of wool fabric specimens, treated with shrink-resist treatment agent, were lower than those of control wool fabric specimens. The stiffness values of wool fabric specimens measured by using Flexometer were increased.

• 패션비즈니스
• /
• 제16권6호
• /
• pp.36-51
• /
• 2012

Quilting, a technique to join two or more layers of fabrics, has long been used in the textile and fashion sectors. To evaluate dimensional effect of quilting that changes according to the characteristics of fabrics, 3D scanning method is employed in this study. Goal of this study is to interpret how fabric's composition, stiffness, thickness, and weight affect the appearance when quilted fabrics are used in a garment. Surface reconstruction method based on 3D scanning is used as a research method to evaluate the changing appearance depending on the material properties quantitatively with the quilting method. Besides, exemplary virtual clothing is realized through a virtual quilting method in 3D digital clothing system based on the properties of fabrics.

• 한국의상디자인학회지
• /
• 제3권1호
• /
• pp.15-31
• /
• 2001

Textile fabrication affected by consumer and selected by fashion designer. The textile fabrication has been made not only by introducing the newly developed fiber but also by modifying the existing textile materials to impart sensibility to them. Consumers choose but to their sensibility of textile material and fashion trend. On purpose in this research is find out have influence on textile image. Wool fabrics have been in use from early age in northern Europe. Recognition of the role of the morphological structure, surface properties, chemical composition, acid-base characteristics in the chemical treatment of wool led to quantum advances in the fields of setting, shrink-resisting, chemical modification, and internal fiber cross-linking. Mechanical finishing to develop the handle, drape, and surface characteristics of the fabric is at least as important as chemical or wet finishing. Result showed that to have variety sensibility and trend theme in wool fabrics are tweed, venetian, serge, gabardine and melton.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.8-14
• /
• 1994

A new flame retardant diphenyl butylamidophosphate (DPBAP) for PET fabric was synthesized and its flame retardancy was examined. The results have shown that PET fabrics treated by DPBAP(with DPBAP and on 4-10 %) show excellent flame retardancy. Since the DPBAP treated PET fabric show essentially no change in the drape stiffness and the tensile strength, it is believed that DPBAP is chemically stable in PET fabric. In addition to this, the washing fastness of DPBAP on PET fabric tested by the 5 times of water washing method also appeared to be excellent. Judging from the fact that DPBAP was synthesized from relatively cheap material as well as the above cited DPBAP properties as a good flame retardant, the potential of DPBAP to be developed as a commercial flame retardant for PET fabric seems to be high.

• 한국의류산업학회지
• /
• 제7권1호
• /
• pp.91-95
• /
• 2005

The purpose of this study is to investigate the improvement of fiber surface, physical properties and research the physical properties and dyeability of cotton fabrics treated with KOH solution at low and high temperature. The treatment conditions for mercerization with KOH were changed various temperatures(25, $90^{\circ}C$), concentrations(15, 20, 25, 30%. w/v) and times(30, 60, 180, 300sec). The effects of mercerization after KOH treatment estimated with tensile strength, tearing strength, shrinkage, drape stiffness, moisture regain, fiber surface, and dyeability. The optimal conditions were concentration of KOH 20%, time 180sec in low temperature and concentration of KOH 20%, time 60sec in high temperature. The results are as follows; Tensile strength, tearing strength and moisture regain were much improved than those of untreated cotton fabric. Shrinkage and drape stiffness of KOH treated cotton were more increased at $25^{\circ}C$ than $90^{\circ}C$. Fiber surface showed more rounded shape at $25^{\circ}C$ than $90^{\circ}C$. Dyeability of cotton fabrics improved by KOH treatment.

• 한국의류학회지
• /
• 제11권3호
• /
• pp.79-88
• /
• 1987

In order to investigate the hand values and mechanical properties such as tensile, shearing, bending, compression, surface and thickness & weight of the women's summer fabrics were measured by KES-F system. Sorts of 78 commercial fabrics of women's summer cloth were classfied into 43 silk and 35 polyester fabrics according to materials. The experimental results were analysed statistically to relate the hand values and the mechanical properties and concerning to formation of weared clothes and transformation behavior were investigated. The main results are summarized as follows; 1. Polyester fabrics show higher tensile deformation than those of silk fabric. And also polyster fabric has a easy to shape-less and makes a silhouette which goes along with the body. 2. Silk fabrics is superior to polyester fabrics in formation and shear elasticity building box-shaped silhouette. 3. Polyester fabrics show sufficient ability to recover from tending deformation and drapability On the other hand, the compressibility and bending rigidity of silk fabrics were superior to polyester fabrics. 4. Regardless of materials, the bending properties is closely assocsiated with stiffness, anti-drape stiffness and flexibility with soft feeling. Fullness & softness and crispness is primarily influenced by surface properties. There is substantive relationship between scrooping and sheaing properties.

• 대한가정학회지
• /
• 제43권2호
• /
• pp.115-126
• /
• 2005

Environmentally and human compatible chitosan were pretreated on cotton fabrics which were then dyed with 100% persimmon juice. The chitosan concentration was 1% and the chitosan types were high molecular weight chitosan (1980cps), low molecular weight chitosan (18첸), chitosan oligomer and water soluble chitosan. The properties of the fabric surfaces, the dyeabilities, the color fastnesses, the antibacterial activities, the strengths, the elongations and the drape stiffnesses were evaluated. The properties of the chitosanpretreated, persimmon juice-dyed cotton fabrics (CLP) were compared to those of the untreated (CN), chitosan treated (CL) and persimmon juice-dyed fabrics (CP). The results were as follows. The fibers extruded from the surface of CN decreased on CP. The air between the fibers within CN were substituted by chitosan solution or persimmon juiceand decreased within CLP according to SEM observations. The effects of chitosan treatment, the chitosan molecular weights and the degrees of deacetylation of chitosan on the dyeabilities of the persimmon juice-dyed cotton fabric were not distinct. The curing after chitosan padding improved the dyeabilities of CLP compare to noncuring. The strengths of CP decreased and those of CL increased, compared to those of CN. The strengths of CLP were greater than those of CP. The elogations of CP and CL were greater than those of CN. The strengths and elongations of CLP were greater than those of CN. The chitosan treatments improved the strengths but not the elongations. The drape stiffnesses of CL, CP and CLP were greater than those of CN. The antibacterial activites of chitosan pretreated, persimmon juice-dyed cotton fabrics against Staphylococcus aureus were increased by more than 98% by persimmon juice.

• 한국염색가공학회지
• /
• 제21권1호
• /
• pp.38-45
• /
• 2009

First of all, the properties imparted to PET fabrics are resistance to and recovery from creasing or wrinkling when wet or dry; high resistance to stretch in the filament yarns but not in the staple; high abrasion resistance; good texture and appearance; resistance to heat ageing; good chemical resistance and good resistance, behind glass, to sunlight. But, the low moisture regain of PET fabric conduces to static troubles in textile processing. Furthermore, garments made from PET may, during wear, develop electric charges which attract to the fabric particles of soil(dirt, swarf, dust) flying in the air, so that the cuffs of shirts, for example, become soiled quickly and are not easily laundered clean. The sericin constitutes 25$\sim$30％ of silk protein and surrounds the fibroin fiber with sticky layer that supports the formation of a cocoon. The useful biochemical properties of sericin protein are oxidation resistant, antibacterial, UV resistant, hydrophilic property, and good affinity with hydrophobic material. These properties can be used as an improving reagent or a coating agent for natural and synthetic fibers, fabrics, and other intermediate products. The sericin is also applied to cross-link, and can be blended with other materials. In this study, we modified the surface of PET fabric by mixture of sericin finishing agent; sericin, polyuretane binder and 1,2,3,4-butanetetracarboxylic acid (BTCA) cross-link agent. Also, we investigated the finshing effect; moisture regain, stiffness, handle, drape and electrostatic. The moisture regain of PET fabric treated with sericin finishing agent was higher than that of untreated PET fabric. As a result of evaluating influence about handle of PET fabrics treated with sericin finishing agent, it was confirmed that the sericin finishing agent could be use as a linen like finishing agent.

• 한국의류학회지
• /
• 제27권5호
• /
• pp.545-553
• /
• 2003

A good school uniform leads students to good behavior and have them enjoy desirable school life. Therefore a better fabric for girls' high school uniform suggested through two series of studies; first, examined the various aspects of current uniforms. Second, made a new fabric for uniform considering elasticity for activity and comfortableness, and compared its characteristics with those of the current uniforms. The results are as follows; 1 Most of students wanted uniforms considering elasticity for activity and wearing. 2. The measurement of the elasticities of the uniform materials showed that the material which was made using the elastic material was more elastic than the currently used material by 42.12% in summer material and 20.05% in winter one. 3. The analysis using the combination of the values of mechanical properties showed that the elastic material was better in the wearing, tactile senses, and drape properties than the current material, even though it was a little worse in shape-stability. 4. To compare the thermal insulation, clo values were measured. For winter uniform, the elastic material was better than the current one in keeping warm. However, This study did not find any big difference between summer uniform materials.