• 한국잠사곤충학회지
• /
• 제29권2호
• /
• pp.67-72
• /
• 1987

견직물의 효소정련에 있어서 조련정도가 효소정련한 견직물의 특성에 미치는 영향을 구명하기 위하여 조련정도가 다른 효소정련견포에 대하여 KES-F System을 적용하여 역학적 특성 즉 인장, 굽힘, 약단, 압축 및 표면특성을 측정하고 태값을 산출하여 비교한 결과는 아래와 같다. 1. 능하부다이 견직물의 경우 조련연감율이 증가와 함께 포의 stiffness는 감소되고 smoothness는 향상되었으나 종합 태값인 soft feeling은 조련 20%에서 가장 우수하였다. 2. 크\ulcorner데신 견직물의 경우 anti-drape stiffness는 조련정도가 커지는데 따라서 증가되었으나 기타 특성과 종합 태값인 Flexibility with soft feeling은 조련정도와 상관이 인정되지 않았다.

• 한국의류학회지
• /
• 제29권6호
• /
• pp.877-884
• /
• 2005

The importance and usefulness of a subjective evaluation of the sensorial properties of scoured silk fabrics is discussed. Silk fabric was treated at 12 different scouring rates and the scoured fabrics were used as specimens. Using paired comparisons, three trained subjects, evaluated seven subjective sensorial properties; softness, elasticity, drape, stiffness, crispness, and luster. A quad experimental design was adopted as an effective and reliable evaluation method. Results showed that some properties such as drape, luster were easily discriminated depending on the scouring rates whereas the smoothness was not easily discriminated. As the scouring rate increased, it was hard to discriminated the softness, drape, and stiffness, which indicates there is an optimum scouring rates to have a certain sensorial properties. It was suggested that these results should be applied to the manufacturing process.

• 한국의류학회지
• /
• 제5권2호
• /
• pp.49-53
• /
• 1981

This study was carried out to investigate the drapability of polyester double jersey skirt Drapability is an important aesthetic properties of fabric on clothing construction, In this thesis weight, shearing, bending and non-isotropic characteristics of fabric were regarded as important factors of drapability, Especially for drapability of skirt, I investigated hem effect on various length of hem and skirt, The results were as follows, 1. The less the weight of fabric was, the greater drapability appeared. On fabrics, large pliability and modulus of shear have good drapability, 2. On clothing cutting, non-isotropic property affected on drapability of clothes remark-ably. Drapability order of clothes was greatest in bias direction, next in wale, course direction, 3. The shorter the skirt length and closer at hem line were the larger the hem effect influence upon the drapability of skirt was.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.135-138
• /
• 2004

Because the compressive properties such as compressive stiffness and compressive maximum strength of the fabric composite materials are essential to analyse the drape behaviour and estimate the quality of the final products, compressive tests of fabric composites with different stacking sequences were performed. Appropriate shape and dimensions for the compressive test specimens were prepared and several specimens with different conditions were tested and compared with each other.

• 한국의류산업학회지
• /
• 제2권2호
• /
• pp.150-158
• /
• 2000

This study investigated mechanical properties, drape coefficients and node indices of stretch fabrics. We applied mechanical properties to exhibited tailorability control in HESC and evaluated making-up. The mechanical properties such as tensile, bending, shearing, compression, surface characteristic values, thickness and weight were measured by the KES-F system and drape coefficient by drape tester. The summarized results of this study were as follows; First, stretch fabrics, almost, shown high stretch in weft inserted polyurethane yarn fabric and had a ${\pm}2{\sigma}$(sigma) range of shearing, compression, surface and thickness, except bending and weight, as compared with Japanese women's thin dress fabrics. Second, bending had a positive correlation in stiffness, anti-drape and flexibility & softness. Shearing had a negative correlation in crispness and scroop. Surface properties had a high contribution in fullness & softness. Third, The drape coefficient was found by measuring the mechanical properties according to the obtained regression equation. Forth, many problems are expected in overfeed and cutting operations in sewing process. In the decision of the good external appearance using TVA, only 26 of 55 samples are included in the range of the good external appearance. Fifth, in the regard of the result for sewing control, warp values are not necessary to control in the all kind of items. But weft value in the RT and EM are out of non-control zone. So we need a special management during sewing process.

• 패션비즈니스
• /
• 제20권3호
• /
• pp.119-132
• /
• 2016

Weighting of silk fabrics have long been practiced in silk fabric trading based on the primary consideration of price-weight, and secondary one of quality improvement in handle, luster, and drape properties. Recent trend of practicing weighting of silk fabrics is, however, focused on the improvement of the handle, luster, drape, and other properties. During the finishing processes of synthetic fiber, nylon, comprising amide structure, include the use of tannic acid, especially in the dyeing. A multitude of studies are being implemented in terms of improving fastness to washing, fastness to light of dyed nylon product, or the light fastness of nylon 6 itself. In this study, the effects of various tannic acid treatments on the physical properties related to the handle of nylon 6 and silk fabrics are examined and reviewed. The effects of treatment condition of the tannic acid, e.g., the concentration of the aqueous tannic acid solution, treatment time, and temperature were investigated. As the concentration of the aqueous solution of tannic acid increased, the bending rigidity values of the silk and nylon 6 fabrics increased. The treated fabrics felt stiff to the touch. Within the mild conditions of bending employed in the bending measurement of KES, nylon 6 treated fabric specimen exhibited a trend of improvement of bending resiliency within the range of small bending deformation. The weight of treated fabrics have all increased. The air-permeability values decreased as the treatment concentration increased. However, the decrease tendency of air permeability values may be alleviated by adjusting the fabric count during the tentering or expanding processes, either by tension adjustment or heat treatment. Optimum conditions of the treatment for nylon 6 are 1.25% tannic acid concentration, bath temperature of $85^{\circ}C$, pH 3.1, and those for silk fabric treatment are 1.25% tannic acid concentration, bath temperature of $85^{\circ}C$, pH 3.1. The treatment conditions will lead to the improvement in the properties of fabrics for summer.

• 한국의류학회지
• /
• 제45권5호
• /
• pp.881-891
• /
• 2021

This study proposes a simple drape measurement method for the 3D virtualization of garments. The proposed method uses angles or disks of different diameters to evaluate the drape properties easily. We divided 710 fabrics into ten groups based on the drape coefficient, of which 49.6% had drape coefficients of 30 or less. The drape properties were measured to classify the groups into smaller clusters using the angle formed when the center of the fabric was fixed. Accordingly, three clusters were formed for 60° and 100° angles. A method was devised using ten disks of different diameters to classify the remaining two clusters, except the cluster containing only the D10 group (D1-D5 and D5-D9). Three criteria-grade match, a sum of deviation, and standardization of deviation-were used for the classifications. The discriminative ability between groups was high for D1-D5 with disks with 24.0 and 25.5 cm diameters. Furthermore, a disk with a diameter of 16.5 cm was effective for D5-D9. The three-dimensional drape shapes were unique for the ten groups, which can be utilized as fundamental data for 3D virtualization.

• 감성과학
• /
• 제14권2호
• /
• pp.191-196
• /
• 2011

노즐시험기로 측정되는 직물의 당김 힘은 직물이 갖는 포괄적인 촉감을 나타낸다. 노즐시험기는 기존 KES 시스템보다 저가이며, 측정에 있어서 절차가 간단하고 빠르다. 본 연구에서는 노즐시험기로 측정되는 직물의 촉감을 정량적으로 평가하기 위해 마찰법칙을 기초로 하여 반 실험적 촉감 방정식을 개발하였다. 모델 식에서 고려된 변수들은 직물의 마찰계수, 그리고 직물의 굽힘 길이와 전단 신도에 의해 결정되는 직물의 3차원적 변형 특성을 나타내는 드레이프 계수이다. 12 종류의 서로 다른 물성의 면과 폴리에스터 직물들을 사용하여 실험 측정한 촉감 값과 모델 방정식으로부터 예측한 촉감 값들을 비교 분석하였다. 높은 마찰계수, 높은 굽힘 길이, 그리고 낮은 전단 신도를 갖는 직물일수록 높은 촉감 마찰력, 즉 낮은 촉감 성능을 보여주었다. 실험 측정한 촉감 값과 모델 식으로부터 계산한 값들 사이 잘 일치하였으며, 이와 같은 결과는 모델 식을 사용하여 직물의 고유 물성들로써 촉감의 객관적인 예측이 가능함과 더불어 촉감 성능의 향상을 위한 직물설계에 있어서도 유용한 정보를 제공할 수 있음을 보여준다.

• 한국의류학회지
• /
• 제20권5호
• /
• pp.783-791
• /
• 1996

The effect of alkali treatment on the changes in characteristics, mechanical properties, and hand of polyester fabrics was studied. Two kinds of fabrics having different yarn deniers were treated varying weight loss. The results were as follows; 1. Changes in constructional characteristics by alkali treatment were: a decrease in weight & thickness of fabric, a decrease in yarn denier, a decrease in apparent density of fabric, an increase in porosity to air, and a change fiber surface. 2. As for the changes in mechanical properties by alkali treatment, findings were : an increase in WT, RT, MIU, LC, and WC, a decrease in LT, B,2HB, G,2HG,2HGS, MMD, SMD, and RC, ana an increase in drape. 3. Changes in hand by alkali treatment were: a decrease in KOSHI and HARE, an increase in FUUURAMI, SHARI, KISHIMI, and SHENAYAUASA, and an increase in T.H.V 4. In the case of the same weight loss, the hand of 40/24 fabric being composed of thinner yarns was better than the hand of 50/24 fabric. 5. When 50/24 fabric was treated to have the same weight with 40/24 fabric, so the yam deniers of two fabrics were the same, the hand of 50/24 fabric having larger weight loss was better than the hand of 40/24 fabric.

• 한국의류학회지
• /
• 제33권1호
• /
• pp.149-159
• /
• 2009

The purposes of this study are to evaluate physical performance of metallic Jacquard fabrics, and to contribute to the research and development of the women's suit made of the metallic Jacquard fabrics. First, eight fabrics were woven with two kinds of warp yarns(nylon and rayon) and weft yarn blended with various contents(0, 7, 14, 21%) of metallic yarn. Second, the mechanical properties were measured by using the KES-FB system, and physical properties such as tensile strength, tearing strength, abrasion resistance, drape, pilling, snagging, degree of crease resistance, flexural stiffness, specular gloss, folding endurance and electrostatic propensity were measured. The results were as follows. As the metal fiber content increased, bending, shear, thickness and weight increased, which imply low recovery of wrinkles. It means that metallic Jacquard fabrics enable to use as a memory fabric. 7% metallic Jacquard fabric showed a low value at total hand value, but there was little change. As the metal fiber content increased, tensile strength, tearing strength, drape coefficient, specular gloss and flexural stiffness increased, however the degree of crease resistance, electrostatic propensity and folding endurance decreased. The metallic Jacquard fabrics were excellent in snagging, abrasion resistance and pilling.