• Textile Coloration and Finishing
• /
• v.30 no.3
• /
• pp.199-207
• /
• 2018

In this study, the properties of polypropylene(PP) non-woven fabric spun under various conditions by the Melt-blown method were verified, and the deodorant content and deodorization of PP non-woven fabric after deodorant-treatment were investigated. PP non-woven fabrics are manufactured by varying the temperature of spin beam, hot air temperature and amount, the RPM of collector R/O and the distance between collector and spinneret, which affects the structure of the non-woven fabric. After that, the structural characteristics and air permeability of the non-woven fabric were measured. The experimental results show that the amount of air, the distance between the collector and the spinneret significantly affect the structural characteristics and air permeability of the PP non-woven fabric. And, regardless of the weight of the PP non-woven fabric, the deodorizing effect of UiO-66 MOF deodorant add-on ratio and content was higher.

• Fashion & Textile Research Journal
• /
• v.14 no.3
• /
• pp.478-485
• /
• 2012

The dying properties of fabrics with Chaenomelis Fructus extract were studied through an investigation of the characteristic of Chaenomelis Fructus colorants, the effect of dyeing conditions (dye temperature, dyeing concentration, and times on dye uptakes), effect of mordant, effect of UV irradiation, and color change in addition, antimicrobial ability and deodorant ability were estimated. In the UV-Visible spectrum, the wavelength of maximum absorption of Chaenomelis Fructus extract was 280 nm and showed that tannin is the major pigment component. From the increase of absorbance by UV irradiation, it was assumed that catechol tannin color was developed through UV irradiation. An increased dyeing concentration resulted in a larger dye uptake. Dye uptake increased as the dyeing time and temperature increased. Chaenomelis Fructus extract showed relatively good affinity to silk than cotton. Mordant, Fe and Cu were effective to increase the dye uptake of cotton fabric in addition, the dye uptake of silk fabric mordanted with Fe and K improved. UV irradiation let the color of dyed fabrics develop regardless of the UV irradiation stage however, UV irradiation on the dyed fabric was more effective than on the extract for the color development. Dyed silk fabric showed very good antimicrobial abilities of 99.9% in addition, deodorant ability improved in the fabric dyed with Chaenomelis Fructus extract.

• Fashion & Textile Research Journal
• /
• v.9 no.1
• /
• pp.96-102
• /
• 2007

Antibacterial finishing of nylon 66 fabrics was carried out with sericite and medilite which are a cheap price antibacterial agents and had excellent antibacterial effects. The particle size of sericite and medilite was 15 ${\mu}m$ and 30 ${\mu}m$. The antibacterial and deodorant ratio, tensile and tear strength, peel strength were examined to investigate the change of physical properties and antibacterial effect. The results are as follows. 1. Peel strength is increased with increasing adhesive content, and satisfied standard value of peel strength when adhesive content is 20 $g/m^2$. Also peel strength was decreased with increasing antibacterial agent content and particle size in the adhesives. 2. Tensile and tear strength were not related with antibacterial agent content in the adhesives. 3. Laundering nylon 66 fabric treated with antibacterial agent, the optimum content satisfying Korean Standard(KS) is 8%. The antibacterial and deodorant ratio were not affected by several types of adhesives.

• Mass Spectrometry Letters
• /
• v.8 no.2
• /
• pp.44-47
• /
• 2017

Isothiazolinone derivatives are widely used in consumer products as disinfectants or preservatives, but there are growing concerns about their impact on human health. Therefore, rapid screening of these biocides is very important for proper control and regulation of potentially hazardous substances. To this end, low-temperature plasma (LTP) ionization mass spectrometry (MS) was investigated to demonstrate its potential for direct and selective analysis of isothiazolinones from sprayed aerosol samples. Benzisothiazolinone (BIT) was clearly identified from a commercial fabric deodorant using LTP ionization MS and MS/MS. LTP allowed selective ionization of BIT directly from the simply sprayed aerosol sample and illustrated its potential for fast screening without sample pre-treatments. Selective nature of LTP ionization, on the other hands, implicates use of LTP ionization MS as a general screening method for specific groups of hazardous chemicals in commercial products.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.3
• /
• pp.336-346
• /
• 2011

Dyeing properties of protein fiber with bamboo colorants were studied by investigating the effect of dyeing conditions such as dye concentration, dyeing temperatures, times on dye uptakes, effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use. In addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were estimated. The dye uptake increased as the dyeing concentration increased. Bamboo colorants showed relatively good affinity to protein fiber and produced a yellow color. Dye uptake increased as the dyeing time and temperature increased. Post-mordanting was more effective than pre-mordanting. Mordants, Fe and N.Fe, were effective for increasing dye uptake. The color of fabric mordanted with Cu and N.Cu changed to GY. Colorfastness of dyed fabrics showed a relatively good rating, and mordanting had no significant effect on colorfastness. Dyed silk fabric showed very good antimicrobial abilities of 99.9%. Also, ultraviolet-cut ability and deodorant ability were improved in silk fabric dyed with bamboo extracts.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.2
• /
• pp.206-217
• /
• 2011

The dyeing properties of cotton fabrics with bamboo colorants were studied by investigating the analysis of bamboo colorants, the effect of dyeing conditions (dye concentrations, dyeing temperatures and times on dye uptakes), effect of mordants, and color change. The various colorfastness of dyed fabrics were evaluated for practical use; in addition, the antimicrobial ability, ultraviolet-cut ability, and deodorant ability were also estimated. In the UV-Visible spectrum, the wavelength of the maximum absorption for bamboo stems and leaves extracts was found to be 280nm and 295nm, respectively; in addition, bamboo colorants produced a yellow color. From the FT-IR and GC-MS results, it was assumed that the chromophoric substance from bamboo extracts was composed of flavones substances with tricin. An increased dyeing concentration resulted in a larger dye uptake and a Freundlich absorption isotherm was obtained. A larger dye uptake occurred as the dyeing time and temperature increased. The post-mordanting was more effective than pre-mordanting. Mordants, Fe and N.Fe, were effective for an increased dye uptake. The color of fabrics mordanted with Cu and N.Cu changed to GY. Regardless of mordanting, the colorfastness on the washing of dyed fabrics showed a low rating compared to other fastness. Mordanting adversely affected the lightfastness of dyed fabric. The dyed fabric showed very good antimicrobial abilities of 99.9%. In addition, the ultraviolet-cut ability and deodorant ability improved in cotton fabric dyed with bamboo extracts.

• Elastomers and Composites
• /
• v.51 no.3
• /
• pp.226-232
• /
• 2016

We studied the photocatalytic functionality such as deodorant, antibacterial, fine dust collection efficiency of polyester-based non-woven fabric filter treated with self-actuated photocatalyst. According to UV/visible result, the UV-visible peak of visible-light responsive photocatalyst was found to be red shift at 420 nm sensitive in the visible light region. The deodorizing performance was shown to be reduced more than 80% even without dark conditions. Fine dust particles collection efficiency was shown to be excellent at the size of not only $2.5{\mu}m{\sim}10.0{\mu}m$ but also less than $2.5{\mu}m$. Also antimicrobial and antifungus was shown to be reduced more than 99.9%.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.66-75
• /
• 2020

This study helps develop cool-touch functional dance sportswear. We suggest a draft design for dance sportswear that chooses appropriate cool-touch functional materials based on an investigation of the changes of body surface temperature before and after exercise, the physical properties of cool-touch materials on the market, and the preference for cooling tools. The results are as follows. First, cool-touch functional sportswear products on the market utilize materials such as PCM, Delta fabric, high gauge fabric, and ice chips as well as incorporate functions such as UV block and eyelets for enhanced breathability. Polyester and polyurethane fibers are mainly used for cool-touch functional sportswear. Second, the neck area showed the highest surface temperatures (32.7℃ and 32.1℃) before and after exercise. Body surface temperatures measured after exercise were also lower than temperatures measured before exercise when wearing dance sportswear. Third, as for the physical properties of cool-touch materials, material 1 showed amaximum drying speed (130 min), material 3 the best moisture absorption speed (122 × 132 min), and material 4 the best thermal conductivity (0.013 7 w/m·K). Fourth, a draft design for a cool-touch functional dance sportswear was suggested, including a neckband made of removable soft PVC material on the neck area and applying material 4 in F1, B4, S2 and lower arm areas and material 1 in the armpit area. Deodorant tape was also attached to the armpit area for added comfort and antibacterial deodorant effect.

• Fashion & Textile Research Journal
• /
• v.20 no.5
• /
• pp.608-615
• /
• 2018

The purpose of this study is to investigate the dyeability and functional properties of dyed fabric with the extract of Myrica rubra rind. For this purpose, the ultraviolet and visible spectra of the bark extracts were investigated. The dyeing temperature, dyeing time, mordant type, mordanting order, mordant concentration and dyeability were investigated. The color fastness based on washing, dry-cleaning, rubbing and light were evaluated by the types of Myrica rubra rind extract used. In addition, the deodorization and antibacterial activity were measured, and the functionality of the silk fabric dyed with the extract of the Myrica rubra rind was evaluated. The result shows that the color strength of the dye was excellent when the Myrica rubra rind was dyed at $80^{\circ}C$ for 80 minutes. The mordant dye color strength was high in the order of Fe mordant> Cu mordant> Al mordant. The dyeability of Al and Cu mordant was high during pre-mordanting compared to Fe mordant, and the dyeability of Fe mordant was high during post-mordanting than Cu and Al mordant. The deodorant property of the dyed fabric stained with the Myrica rubra rind extract was 92.4% and that of antibacterial property was 99.9% for Staphylococcus aureus and Klebsiella pneumoniae bacteria respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.1
• /
• pp.3-12
• /
• 2001

The dyeing powder drawn out from Dryopteris crassirhizoma by water was concentrated. Using this powder, the silk and the cotton fabrics were dyed and they measured with the K/S value, surface color, mordant quantity in order to evaluate the dyeability, antimicrobial and deodorant properties. The colorant of Dryopteris crassirhizoma was proved flavonoids by FT-IR spectrum. The K/S values of silk were much higher than those of cotton, the color yield of the silk and cotton fabric were most efficient the postmordanting method. The surface colors on the dyed fabric depended heavily upon mordants used or mordanting methods. For all cases, the value of the dyed fabric was generally dark. The chroma produced clear for the Al-mordant of silk and the Cu-mordant of cotton in the 3% concentration of mordants, the color difference was distinct when using the Fe-mordant. The K/S values of cationized cotton were much higher than cotton. The color fastness was significantly improved when mordants were added, In the case of the light fastness, Fe and Cu-mordants improved more than 1 level. The Cu-mordant showed the greatest antimicrobial and deordarant activity on both of the silk and the cotton.