• 제목/요약/키워드: f-w curve

검색결과 52건 처리시간 0.026초

Fusarium poae와 Fusarium sporotrichioides간의 원형질체 융합 (Interspecific Protoplast Fusion between Fusarium poae and Fusarium sporotrichioides)

  • 하경란;장성렬;민병례
    • 미생물학회지
    • /
    • 제29권2호
    • /
    • pp.123-129
    • /
    • 1991
  • In order to develop the protoplast fusion method of the strains of Fusarium, the interspecific protoplast fusion was attempted between Fusarium poae and F. sporotrichioides. Various auxotrophic mutants were isolated by the treatment of N-Methyl-N'-Nitro-N-Nitrosoguanidine. The optimal conditions for the formation and regeneration of protoplasts were examined and the characteristics of a fusant were studied. As a results, protoplasts were readily obtained from 18 hours cultured mycelia by the treatment of driselase for 3 hours and 0.6 M KCl as a best osmotic stabilizer at pH 6.0 for the formation of protoplast. Sucrose was the most suitable for the regeneration. Polyetylene glycol (M.W. 8,000) in $CaCl_{2}$-glycine solution was used to induce the protoplast fusion. The interspecific fusion frequency between protoplasts among the auxotrophic mutants of the two strains ranged from $2.7*10^{-2}$ to $5.7*10^{-3}$ . DNA content and cellulase activity were rather increased in the interspecific fusant. The lag phase of growth curve was slightly elongated in the fusant.

  • PDF

SP시험에 의한 TMCP강의 방향성 및 용접부의 파괴인성에 관한 연구 (A study on fracture toughness of welded joint and orientation in TMCP steel by th SP test)

  • 유효선;안병국;류대영;정세희
    • Journal of Welding and Joining
    • /
    • 제16권6호
    • /
    • pp.35-43
    • /
    • 1998
  • In this paper, the fracture toughness evaluation of the various microstructures such as HAZ, F.L and W.M in weldment of TMCP steel which has the softening zone owing to high heat input welding was carried out by using of the small punch(SP) test. In addition, the fracture toughness with the specimen orientation of rolled TMCP steel was investigated by means of SP test and the crack opening displacement (COD) test and then was compared with that of conventional SM50YB steel. From the results of SP test for TMCP steel, it could be seen that the SP energy transition curves of three different orientation were shifted to higher temperature side in order of S, T and L. But the {TEX}$DBTT_{SP}${/TEX} of each orientation specimen did not show a lot of differences and were quite lower than those of conventional SM50YB steel. The mechanical properties of HAZ structure in weldment of TMCP steel such as hardness, SP energy at room temperature and -196$^{\circ}C$ and the upper shelf energy of SP energy transition curve were lower than those of base metal due to softening. The {TEX}$DBTT_{SP}${/TEX} of each microstructure in weldment of TMCP steel increased in order of HAZ, F.L and W.M against base metal, but all microstructures showed a quite lower {TEX}$DBTT_{SP}${/TEX} than those of SM50YB steel.

  • PDF

견의 저온 염색에 관한 연구 I. 산성 Milling형 염색에 있어서의 저온염색 (The Studies of Low Temperature Dyeing on Silk Fibers I. Low Temperature Dyeing of Silk Fiber in the Milling Type Acid Dye)

  • 배도규;배현석;정태암
    • 한국잠사곤충학회지
    • /
    • 제34권2호
    • /
    • pp.52-57
    • /
    • 1992
  • 견의 저온염색용 조제(K-1)를 사용하여 염료 농도, 염욕의 pH, 염색시간에 따른 염색속도를 구하여 이 저온염색용가 염색에 미치는 영향을 분석한 결과를 다음과 같이 요약한다. 1. pH 7에서 K-1의 농도가 증가할수록 무첨가구에 비해 흡진율은 증가 하였으며, K-1의 농도가 3% o.w.f. 이상에서는 증가의 경향이 둔화되었다. 2. pH 5에서도 무첨가보다 K-1의 첨가구에서 높은 흡진율을 보였으며, pH 7의 5$0^{\circ}C$ 첨가구가 pH 5, 5$0^{\circ}C$의 무첨가구보다 확산성은 높게 나타났다. 3. 염료 농도별로 볼 때 pH 7과 pH 5에서 모두 K-l 첨가구에서는 무첨가구보다 흡진율이 클 뿐만 아니라 염료 농도에 따른 흡진율 감소가 적게 일어났다.

  • PDF

활성탄소 전극의 제조공정에 따른 EDLC의 전기화학적 특성 (Electrochemical Characteristics of EDLC Fabricated by Different Preparation Processes of Activated Carbon Electrode)

  • 양천모;김현중;조원일;조병원;윤경석;임병오
    • 전기화학회지
    • /
    • 제4권3호
    • /
    • pp.98-103
    • /
    • 2001
  • EDLC(electric double layer capacitor)용 활성탄소전극의 제조공정을 dip coating method, doctor blade coating method, paste rolling method로 달리하여 전기화학적 특성과 비축전 용량을 조사하였다. Dip coating method에 의한 전극제조시 전해질염으로 LiPF6를 이용하고 유기용매로 PC-DEC를 이용한 EDLC의 비축전 용량이 130F/g으로 가장 우수하였고, 선형의 시간전압곡선에서의 IR-drop도 0.11V로 작았으며 CV(cyclic voltammetry) 분석 또한 이상적인 EDLC의 특성을 나타내었다.

변형률에 따른 탄성계수 변화를 고려한 말뚝의 주면지지력 산정 (Estimation of Pile Shaft Resistances with Elastic Modulus Depending on Strain)

  • 김석중;김성헌;정성준;권오성;김명모
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.933-943
    • /
    • 2009
  • Axial loads and shaft resistances can be calculated by load transfer analysis using strain data with load level. In load transfer analysis, the elastic modulus of concrete is a one of the most important parameters to consider. The elastic modulus, $E_{50}$, suggested by ACI (American Concrete Institute), has been commonly used. However, elastic modulus of concrete shows nonlinear stress-strain characteristic, so nonlinearity should be considered in load transfer analysis. In this paper, a load transfer analysis was performed by using data obtained from bi-directional pile load tests for four cases of drilled shafts. For consideration of nonlinearity, elastic modulus was calculated by both the Fellenius method and the nonlinear method, assuming the stress-strain relation of concrete to be a quadratic function, and then, the calculated elastic modulus was applied to the estimation of shaft resistance. The calculated shaft resistances were compared with the result obtained using the constant elastic modulus of ACI code. It was found that the f-w curves are similar to each method, and elastic modulus and shaft resistances decreased as strain increased. Moreover, shaft resistances estimated from elastic modulus considering nonlinearity were 5~15% different than those obtained using the constant elastic modulus.

  • PDF

초임계 유체 염색용 염료에 따른 Nylon 섬유의 염색 특성 (2) : C.I. Disperse Yellow 42, C.I. Disperse Orange 155 (A Study of Dyeing Properties of Nylon Fabrics under Supercritical CO2 Depending on Dyestuff (2) : by C.I. Disperse Yellow 42, C.I. Disperse Orange 155)

  • 최현석;김훈민;이정언;박신;김태영
    • 한국염색가공학회지
    • /
    • 제33권1호
    • /
    • pp.31-39
    • /
    • 2021
  • In this study, the dyeing properties of supercritical fluid dyed nylon fabrics were investigated which use two types of dyes for dyeing nylon. For other dyeing conditions were referred to related literature, and dyeing was performed with different dyeing concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, the color intensity increased as the concentration increased, but the increase was insignificant at high concentration. This tendency was more obvious in C.I. Disperse Orange 155 than in C.I. Disperse Yellow 42. The dye absorption rate also decreases as the concentration increases, but at 0.85% o.w.f concentration, C.I. Disperse Yellow 42 was 97.29% and C.I. Disperse Orange 155 was 93.77%. For both dyes, the wash fastness dropped by 0.5 to 1 class from the sample that was dyed at a concentration of 0.5% o.w.f in the wash fastness test.

배란유도주기에 따른 초음파검사와 기초체온표의 비교분석 (A Comparative Analysis of Basal Body Temperature to Ultrasound, as a Method of Ovulation Detection in Induced Ovulatory Menstrual Cycles)

  • 최욱;서병희;이재현
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제12권2호
    • /
    • pp.25-37
    • /
    • 1985
  • Four points on the basal body temperature (B.B.T.) curve was correlated with the estimated time of ovulation, as determined by serial ultrasound in 50 induced menstrual cycles from 22 subjects. The time of ovulation was estimated by measuring the maximal diameter of follicles and observing the morphologic changes within the ovary from follicle to corpus luteum. The results were as following; 1. The diameter of the follicle measured at the day before disappearance was 21.1 mm on an average (S.D.: 2.14). The average follicular growth for 4 days before ovulation was measured at a rate of 2.8 mm/day, and rapid growth of follicle was observed 3.1 mm/day at the day before. 2. The changes associated with rupture of the follicles were the followings, in order of frequency; decrease in size(94%), disappearance of follicles(64%), fluid in the Cul-de-Sac(26%) and increased internal echoes(16%). 3. Only 20 of 50 cycles, exhibited a BBT dip and correlated with the estimated time of ovulation by ultrasound in 2 of which cases(10%). BBT nadir, 30 of 50 cycles, correlated in 5(16.7%). The first day of hyperthermic plateau(FDHP) and BBT coverline was exhibited in all cycles, correlated in 41(82%) and 35(70%) cases. 4. The relationship between the diameter of dominant dominant follicle, measured by ultrasound, and the basal body temperature curve were as following. During cycles in which dip was observed on the BBT curve, the follicular diameter were 10.5${\pm}$2.12 mm on 4 days prior to the point (D-4), and 12.5${\pm}$2.12 mm (D-3), 15.5${\pm$2.12 mm (D-2), 17.0${\pm}$1.41 mm (D-1) and 21.5${\pm}$2.12 mm just prior to the dip (D-0). In the nadir; 9.6${\pm}$1.67 mm (N-4), 12.8${\pm}$1.79 mm (N-3), 16.2${\pm}$1.92 mm (N-2), 18.2${\pm}$2.17 mm (N-1) and 21.4${\pm}$2.61 mm (N-0). In the First day of Hyperthemic Plateau (FDHP); 9.8${\pm}$1.36 mm (F-4), 12.4${\pm}$1.41 mm (F-3),15.1${\pm}$1.57 mm (F-2), 18.1${\pm}$1.67 mm (F-1) and 21.2${\pm}$2.25 mm (F-0). In the BBT coverline endopint; 9.9${\pm}$.39 mm (C-4), 12.5 ${\pm}$1.44 mm (C-3), 15.2${\pm}$1.64 mm (C-2), 18.0 ${\pm}$1.69 mm (C-1), and 21.2${\pm}$2.31 mm (C-0). 5. The relationship between the ultrasonographic signs of ovulation and the basal body temperature curve were as following. The BBT dip correlated with the ovulation in 2 cases, which revealed decrease in follicular diameter (100%), fluid pattem in the Cul-de-Sac (1 case, 50%) and complete disappearance of follicle (1 case, 50%). In the nadir (5 cases); the ultrasonographic signs of ovulation were decrease in follicular diameter (5 cases, 100%), fluid pattern in the Cul-de-Sac (1 case, 20%) and complete disappearance of follicle (3 cases, 60%). In the First day of Hyperthermic Plateau (41 cases); decrease in follicular diameter (40 cases, 97.6%), fluid pattern in the Cul-de-Sac (11 cases, 26.8%), appearance of internal echo and thickening of the wall (6 cases, 14.6%) and com plete disappearance of follicle (28 cases, 68.3%). In the BBT coverline endpoint (35 cases); decrease in follicular diameter (33 cases, 94.3%), fluid pattern in the Cul-de Sac (9 cases, 25.7%), appearance of internal echo and thickening of the wall (5 cases 14.3%) and complete disappearance of follicle (20 cases, 57.1%).

  • PDF

FDG를 이용한 Brain PET에서 Glucose Level이 영상에 미치는 영향 (Effect of Glucose Level on Brain FDG-PET Images)

  • 김인영;이용기;안성민
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제40권2호
    • /
    • pp.275-280
    • /
    • 2017
  • $^{18}F$-FDG는 종양 외에도 뇌, 심근과 같은 정상조직에도 섭취가 될 수 있고 주변 환경에 의해서 정상조직의 섭취량이 변화할 수 있다. $^{18}F$-FDG를 이용한 검사 시에 전처리가 필요한데, 전처리로 종양조직과 정상조직의 영상적대조도를 증가시킬 수 있다. 따라서 본 연구에서는 소 동물을 이용하여 당 대사가 항상 활발한 뇌에서 $^{18}F$-FDG를 이용한 PET검사 시 혈당수치가 PET영상에 어떠한 영향을 미치는지 알아보았다. 총 14마리의 ICR-mouse를 이용하여 $^{18}F$-FDG를 주사 후 micro PET을 이용하였으며, 영상을 획득하여 금식 유무에 따라 비교 분석하였다. 그 결과 금식을 한 쥐의 뇌에서 평균 표준섭취계수값이 금식을 하지 않은 쥐보다 0.84 더 높게 나왔으며, 금식을 하지 않은 쥐에서 브레인 외의 장기에 많은 집적을 보였으며, 주변 노이즈가 증가한 것을 확인하였다. 시간방사능곡선의 비교에서도 금식을 하지 않은 쥐보다 금식을 한 쥐의 시간방사능곡선의 초반섭취율과 곡선 상승률이 높은 것을 확인하였다. $^{18}F$-FDG를 이용한 brain PET검사에서 금식의 전 처치는 뇌의 기능을 평가하는데 중요하다는 것을 알 수 있었고 카페인 성분이나 다른 전처리 항목도 추후 실험을 통하여 영상에 미치는지 지속적으로 연구한다면 환자의 방사선 피폭선량 감소에 기여할 것이라 사료된다.

임하호유역 유사유달공식 개발 (Developing Suspended Sediment Delivery Ratio in the Lake Imha Watershed)

  • 전지홍;최동혁;김재권;김태동
    • 한국물환경학회지
    • /
    • 제33권6호
    • /
    • pp.744-753
    • /
    • 2017
  • The sediment delivery ratio (SDR) is widely used to estimate sediment loads by multiplying soil loss through the Revised Universal Equation (RUSLE). In this study, the SDR equation was developed for the Lake Imha watershed using soil loss calculated by RUSLE and sediment loads by the calibrated Hydrological Simulation. Program Fortran (HSPF). The ratio of watershed relief and channel length ($R_f/L_{ch}$), the ratio of watershed relief and watershed length ($R_f/L_b$), curve number (CN), area (A), and channel slope ($SLP_{ch}$) demonstrated strong correlations with SDR. SDR equations were developed by a combination of subwatershed parameters by referring to the correlation analysis. The area based power functional SDR developed in this study showed significant errors at the point right after entering major tributaries, because SDR was unrealistically reduced when the watershed area increased significantly. The $SLP_{ch}$-based power functional SDR also showed extraordinary values when the channel slope was gradual. The SDR equation that showed the highest value of the coefficient of determination also presented unrealistic changes in the sediment loads within a relatively short river distance. The SDR equation $SDR=0.0003A^{0.198}R_f/L{_w}^{1.167}$ was recommended for application to the Lake Imha watershed. Using this equation, sediment loads at the outlet of the Lake Imha watershed were calculated, and the HSPF parameters related to sediment in the uncalibrated subwatersheds were determined by referring to the sediment loads calculated with the SDR equation.

실내실험을 통한 개량형 공압식 가동보의 월류흐름 특성 분석 (Analysis of Flow Characteristics of the Improved-Pneumatic-Movable Weir through the Laboratory Experiments)

  • 이경수;장창래;이남주;안상진
    • 한국수자원학회논문집
    • /
    • 제47권11호
    • /
    • pp.1007-1015
    • /
    • 2014
  • 본 연구에서는 실내실험을 통하여 국내 중 소하천에 가장 많이 설치되고 있는 개량형 공압식 가동보를 대상으로 다양한 유량 변화에 대한 흐름특성을 분석하고, 유량계수산정식을 도출하였다. 실험결과, 가동보 기립각도에 따라 월류유량계수 ($C_d$)의 값은 0.613~0.634로 산정되었으며, 상류 Froude number ($F_{r1}$), 상대위어길이(${\xi}$), 전수두비($H_1/W$), 상류수심과 위어마루를 월류하는 수심의 비($y_c/y_1$)는 상류의 영향을 받으며 하류 Froude number ($F_{r2}$), 하류수심과 위어마루를 월류하는 수심의 비($y_c/y_2$)는 하류의 영향을받아 변화하였다. 상 하류수위차와 하류수심의 비(${\Delta}y/y_2$)는 상 하류의 영향을 모두 받아 변화되는 특성을 보여주었다. 주요 영향변수를 고려하여 다중회귀분석에 의한 유량계수산정식을 도출한 결과, 개량형 공압식 가동보의 월류유량계수는 상류흐름 조건이 상류일 때, 가동보의 높이 즉, 기립각도에 따른 물리적 제원과 상류 접근흐름수두의 조건에 의하여 결정되는 것으로 나타났다.