• Journal of Magnetics
• /
• v.8 no.4
• /
• pp.153-156
• /
• 2003

The values of crystalline-electric-field parameters $A_{nm}$ for $RFe_{11}$Ti $H_{x}$ (R=Tb,Ho) (x=0,l) are obtained by fitting calculations to the magnetization curves along the crystal axes at 4.2 K and higher temperatures. The insertion of H element in RFe$_{11}$Ti significantly affects CEF parameters $A_{nm}$ . By using exchange field 2${\mu}$$_{B}$ $H_{ex}$ derived by inelastic neutron scattering and fitted $A_{nm}$ , the calculations reproduce the experimental curves well.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.690-693
• /
• 2005

In this paper, probabilistic distribution of fatigue life of chassis component is determined statistically by applying the design of experiments and the Pearson system. To construct $p-\varepsilon-N$ curve, the case that fatigue data are random variables is attempted. Probabilistic density function(p.d.f) for fatigue life is obtained by design of experiment and using this p.d.f fatigue reliability about any aimed fatigue life can be calculated. Lower control arm and rear torsion bar of chassis component are selected as examples for analysis. Component load histories, which are obtained by multi-body dynamic simulation for Belsian load history, are used. Finite element analysis are performed using commercial software MSC Nastran and fatigue analysis are performed using FE Fatigue. When strain-life curve itself is random variable, probability density function of fatigue life has very little difference from log-normal distribution. And the case of fatigue data are random variables, probability density functions are approximated to Beta distribution. Each p.d.f is verified by Monte-Carlo simulation.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.2
• /
• pp.50-57
• /
• 2008

The effect of weld improvement on the corroded fatigue life of welded structures was investigated. Toe grinding, TIG dressing and weld profiling were used as the geometric improvement methods. Fatigue tests under the corroded condition in artificial seawater were carried out to investigate the corrosion fatigue behavior of API 2W Gr.50T steel plate produced by POSCO. The test results in weld improved conditions were compared with those in as-welded condition. The test results were also compared with the design curves in UK DEn Class F. Corroded fatigue life of weld improved specimens was longer than that of as-welded specimen. Especially, the corroded fatigue life exceeded the mean SN curve in air of UK DEn Class F.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.184-185
• /
• 2011

In this study, in order to obtain a high reflectivity for the LED lead frame, tin dip coating and tin plating were conducted respectively, and wettability of LED lead frame with tin solder also was tested by wetting balance tester. A Cu sheet was plated in Cu brighten electroplating bath and followed by immersion in a Sn electro-less plating bath [1]. On the other hand, in the dip coating process, a Cu sheet was dipped into molten tin. In the progress of wetting test, besides wetting balance curve, the maximum measured force($F_m$), the maximum withdrawal force($F_w$) and zero-cross time($t_0$) were obtained in various temperatures. With the maximum withdrawal force, the surface tension was calculated at different temperatures. The Cu sheet plated with bright Cu and Sn show a silver bright property while that of Cu dipped with Sn possessed a high reflectance density of 1.34GAM at $270^{\circ}C$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.6
• /
• pp.1116-1124
• /
• 1996

The factors to presume the shapes of bending and draping were examined in this study, by applying the similar phenomenon and theory of analysis. The findings were as followings: 1. The value of deflection angle (f) of deflection curve were almost consistent with those of K number and the shapes of deflection curve were congruent, under the condition of that the values of EI/w are almost similar and the lengths of samples are consistent. 2. The values of drape area, drape coefficient, mean of deflection angle, and $\pi$ number were consistently estimated and the shapes of drape were almost the same, under the condition of that the values of EI/w are similar and the diameter of samples are consistent. 3. In using the samples with different values of EI/w, scale factor, kl, was obtained from the formula, the shapes of bending of the referent samples and compsactive smaples was geometrically similar, which the lengths of samples were 1,1'and were satisfied with the formula, hi: L'11, and their $\pi$ number were also consistent. 4. In applying the samples with different values of Rllw, scale factor (kl) was obtained and then, when semidiameter of samples was adjusted to be satisfied with the formula, k1=L/L, the shapes of draping of referent samples and comparative samples were geometrically similar. Furthermore, their $\pi$ number was also consistent. 5. The shares of bending and draping could be changed in terms of three factors such as the lengths of samples, bending ridigity, and weigths per unit area. $\pi$ number was obtained from theory of similar phenomenon, which was index to presume shapes of bending and the shapes of draping getting from the three factors.

• Journal of the Korean Society of Food Culture
• /
• v.22 no.1
• /
• pp.157-165
• /
• 2007

This study was designed to evaluate the effects of fructose(F) or sucrose(S) and guar gum intake on carbohydrate and lipid metabolism in 15-week-old male Goto-Kakizaki(GK) rats. Fifty rats were randomly assigned to 5 groups which were different in carbohydrate(25% of carbohydrate) and fiber(5% w/w) sources. The carbohydrate(CHO) sources of each group were comstarch(control group, 100% of CHO), fructose with cellulose(F), fructose with guar gum(FG), sucrose with cellulose(S), and sucrose with guar gum(SG). Each group was fed exterimental diet for 4 weeks. We measured food intake, body weight gain, adipose tissues weight and organs weight. We conducted oral glucose tolerance test(OGTT) and measured plasma insulin concentration to examine carbohydrate metabolism. To evaluate lipid metabolism, we measured the lipid profile of plasma, liver and feces. Food intake and weight gain of FG or SG groups tended to be less than those of F or S groups. Perirenal and epididymal fat pad weights of SG group were significantly lower than those of S group and those of FG group tended to be lower than those of F group. In OGTT, blood glucose values of F or S groups were significantly higher than those of C group, and FG or SG groups tended to be lower than those of F or S groups during the experimental time. The area under the curve(AUC) of C group was significantly highest among the groups, AUC and plasma insulin concentration of FG or SG groups tended to be lower than those of F or S groups. Plasma and hepatic triglyceride (TG) of FG and SG groups were significantly lower than those of F and S groups, plasma and hepatic total lipid(TL) and total cholesterol(TC) of FG and SG groups tended to be lower than those of F and S groups. Fecal TL, TG and TC of FG or SG groups tended to be higher than those of F and S groups. In conclusion, intake of guar gum should improve carbohydrate and lipid metabolism in partial substitution of fructose or sucrose for cornstarch in GK rats.

• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.93-101
• /
• 2022

In this study, the dyeing properties of supercritical fluid dyed cotton fabrics were investigated which use two types of dyes, such as C.I. Disperse orange and C.I. Disperse red 167. Dyeing temperature, pressure and leveling time were equally applied at 130 ℃, 250 bar, and 60 minutes with reference to the related literature, and experiments were performed at concentrations of 0.04, 0.1, 0.4 and 0.8 % o.w.f with different concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, as the concentration increased, the L^* value decreased and the K/S value increased. However, as the concentration increased, the increase in K/S value decreased compared to the input amount, and this tendency was more obvious in C.I. Disperse red 167 than in C.I. Disperse orange 155. The dye exhaustion rate which was calculated by using the amount of residual dye in the pot was also C.I. Disperse orange 155 was 96.16 % and C.I. Disperse red 167 was 94.57 %. However, as the dyeing concentration increased, the dye exhaustion rate decreased, that C.I. Disperse orange was 95.33 % and C.I. Disperse red 167 was 90.63 %. As a result of the washing fastness test for both dyes, dyed samples of which concentrations were 0.4 and 0.8 % o.w.f decreased by 0.5 ~ 1.0 grade. This is predicted because the dye did not completely adhere to the amorphous region of the cotton fiber and the dye simply adsorbed. The fastness to rubbing also maintained at least grade 3-4 up to the 0.1 % o.w.f concentration, but at the concentration of 0.4 % o.w.f or higher, it fell to grade 1 or lower, showing a very poor friction fastness.

• Journal of Welding and Joining
• /
• v.7 no.1
• /
• pp.42-50
• /
• 1989

The application of fracture mechanics is being increased gradually to assess the safety of welded structures containing crack. Fatigue crack propagation behavior and elastic-plastic fracture toughness J$_{IC}$ of home made flux cored wire(1.22mm) CO$_{2}$ weldments was discussed. Especially fatigue crack propagation test was carried out by .DELTA.K control instead of load control and elastic-plastic fracture toughness J$_{IC}$ was obtained by ASTM-R curve method on C.T.specimen in transverse direction of weldments. The results obtained are as follows; (1) Weld metal presented an almost complete similarity to base metal on fatigue crack propagation rate in transverse direction. (2) Weld metal was more than base metal on J$_{IC}$ value in transverse direction. (3) F.C.W. CO$_{2}$ weldments had an excellent characteristic of fatigue crack propagation rate and J$_{IC}$ in less than 50kg/mm$^{2}$ steel grade, this would result from that weld metal had good static strength.trength.

• Water for future
• /
• v.14 no.4
• /
• pp.53-72
• /
• 1981

In this study, South Korea is divided into 5 zones and is studied about the analysis of time-regional distribution of previpitation frequency and rainfall intensity in Korea. In the previpitation frequency analysis, the basic data groups of 39 stations were selected. The diagram of previpitation frequency was drawn, and the time-regional distribution of precipitation frequency was analized. In the rainfall intensity analysis, the basic data groups of 36 stations were selected. The probable rainfall, I-D-F curve, and regression equation between 24hr. and 10min.-18hr. areal depth were obtained. The results of this study are following; 1) The precipitation class of max. recurrence probability in every season except summer was commonly (1) 1-5mm, (2) 0.1-1mm, (3) 5-10mm in order. 2) The zone of max. recurrence frequency owing to the precipitation class was zone II in precipitation frequency of below 20mm, zone IV in precipitation frequency of 30-40mm, zone I in precipitation frequency of above 70mm for a year. 3) The recurrence probability of precipitation in Korea can be represented to the equation of exponential function; $$W(x)=e^{\alpha+\beta}$$ 4) The first and third zones were expected heavy rain for the short and long duration. 5) The I.D.F. curves were drawn, and established that the time interval for the least deviation of I.D.F curve is 10~40min., 40min. -4hr., 4~24hr. 6) The regression equations of areal mean depth between 24hr. and 10min.-18hr. for each zone were obtained. 7)The probable rainfall of 36 points were calculated.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.57-64
• /
• 2005

Since the allowable bearing capacities of piles in weathered/fractured rock are mainly governed by settlement, the load-displacement behavior of the rock socketed pile should be well known. To predict pile head settlement at the design stage, the exact understanding of the load-transfer mechanisms is essential. Therefore, in this research, the load-transfer mechanisms of drilled shaft socketed into weathered rock was investigated. For that, 5 cast-in-place concrete piles with diameters of 1,000 mm were socketed into weathered gneiss. The static axial load tests and the load-transfer measurements were performed to examine the axial resistant behavior of the piles. A comprehensive field/laboratory testing program on weathered rock at the field test sites was also performed to describe the in situ rock mass conditions quantitatively. And then, the effect of rock mass condition on the load transfer mechanism was investigated. The side shear resistance of the pile in moderately weathered rock reached to yielding point at a few millimeter displacements, and after that, the rate of resistance increment dramatically decreased. However, that in the highly /completely weathered rock did not show the obvious yielding point, and gradually increased showing the hyperbolic pattern until with the relatively high displacement (>10 mm). The end bearing-displacement curves showed linear increase at least until with the base displacement of approximately 10 mm, regardless rock mass conditions.