• Journal of the Chungcheong Mathematical Society
• /
• v.26 no.1
• /
• pp.221-229
• /
• 2013

We show that if X is a space such that ${\beta}QF(X)=QF({\beta}X)$ and each stable $Z(X)^{\sharp}$-ultrafilter has the countable intersection property, then there is a homeomorphism $h_X:vQF(X){\rightarrow}QF(vX)$ with $r_X={\Phi}_{vX}{\circ}h_X$. Moreover, if ${\beta}QF(X)=QF({\beta}X)$ and $vE(X)=E(vX)$ or $v{\Lambda}(X)={\Lambda}(vX)$, then $vQF(X)=QF(vX)$.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.842-844
• /
• 1993

We present a F.L.C. (Fuzzy Logic Controller) to control of the oscillation frequency of a V.C.X.O. (Voltage Controled Crystal Oscillator). This F.C.X.O. maintains stable its oscillation frequency inside a range of 1 ppm (one part per millon), with temperature between -55$^{\circ}C$ to＋75$^{\circ}C$.

• MALSORI
• /
• no.65
• /
• pp.37-49
• /
• 2008

The purposes of this experiment were to compare and analyze some voice parameters of the hearing impaired male adults and to suggest a basic data on the speech intervention for the hearing impaired. Voice analysis of four sustained vowels(/a/, /i/, /${\partial}$/, /u/, fundamental Sequency(F0), jitter percent, shimmer percent, and Noise to Harmonic Ratio(NHR) was conducted for the deaf young male adults using a sign laguage(N=5, aged 16-20) and the normal hearing young male adults(N=10, aged 18-20) by using MDVP(Multi-Dimensional Voice Program) in CSL. F0, jitter, and shimmer in the deaf group were significantly higher than those in the normal hearing group. The average of F0 was 151 Hz, which was lower than the results of the previous studies, and there were no significant differences among the sustained vowels. In both groups, the values of the voice parameters were stable on the /a/ or /${\partial}$/, those closed to the standard scores.

• Journal of the Korean Society of Industry Convergence
• /
• v.19 no.1
• /
• pp.39-41
• /
• 2016

In the paper, we propose an stable walking algorithm of biped robot on the ground and working motion stabilization algorithm against external disturbances. We propose obstacle hurdling, incline walking, and going-up stairs algorithm by using infrared sensors and F/T sensors. Also, posture stabilization algorithm against external forces is designed using F/T sensors. Infrared sensors are used to detect the obstacles in he working environment and F/T sensors are used to obtain the ZMP of biped robot. The experimental results show that the biped robot performs obstacle avoidance, obstacle hurdling, walking on the inclined plane by using the proposed walking moton stabilization algorithm.

• Journal of the Korean Ceramic Society
• /
• v.14 no.1
• /
• pp.12-18
• /
• 1977

In our former paper, tremolitic talc, -wollastonite-clay system was studied. In this study blast furnace slag was used(B.F.S.) instead of wollastonite for developing a fast-firing wall tile body. The wall tile bodies consisting of tremolitic talc and B.F.S. asmajor constituents have been fired in the temperature range 1000-120$0^{\circ}C$. Some of these bodies have showed good properties for wall tile manufacture. According to the increased content of B.F.S the fired bodies have showed the decreased thermal expansion which was resulted from the fact that the amounts of diopside and anorthite were gradually increased and those of quartz relatively decreased. Being reasonable in low price and thermo-stable properties tremolitic talc and B.F.S. will be good materials for the fast-firing tile body.

• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.617-617
• /
• 1989

This paper deals with a fatigue life prediction of a surface crack based on the experimentally obtained relationship between surface crack length ratio $a/a_{f}$ and cycle ratio $N/N_{f}$ using micro computer. Firstly $a/a_{f}$-$N/N_{f}$ curves obtained from experimental tests, were assumed as three curves UC(the upper limit curve), LC(the lower limit curve) and MC(the middle curve), and these were utilized to predict the fatigue life. Comparing the calculated values which represent the characteristics of crack growth behaviors from the three assumed curves with the experimental ones, it has been found that in the stable crack growth region, they coincide reasonably well each other. And the differences between the fatigue lives obtained from the assumed curves and the experimental fatigue life did not exceed 20%. Using the characteristics of $a/a_{f}$-$N/N_{f}$ curves, it is possible to predict the da/dN-Kmax curves and the S-$N_{f}$ curves.

• Journal of Ocean Engineering and Technology
• /
• v.3 no.2
• /
• pp.108-117
• /
• 1989

This paper deals with a fatigue life prediction of a surface crack based on the experimentally obtained relationship between surface crack length ratio $a/a_{f}$ and cycle ratio $N/N_{f}$ using micro computer. Firstly $a/a_{f}$-$N/N_{f}$ curves obtained from experimental tests, were assumed as three curves UC(the upper limit curve), LC(the lower limit curve) and MC(the middle curve), and these were utilized to predict the fatigue life. Comparing the calculated values which represent the characteristics of crack growth behaviors from the three assumed curves with the experimental ones, it has been found that in the stable crack growth region, they coincide reasonably well each other. And the differences between the fatigue lives obtained from the assumed curves and the experimental fatigue life did not exceed 20%. Using the characteristics of $a/a_{f}$-$N/N_{f}$ curves, it is possible to predict the da/dN-Kmax curves and the S-$N_{f}$ curves.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.654-661
• /
• 2019

This study assessed the stabilization of fluorine (F)-contaminated soil using calcium hydroxide (Ca(OH)₂) and the consequent changes in human health risk. The bioavailable F decreased to 3.5%, (i.e., 57.9 ± 1.27 mg/kg in 6% Ca(OH)₂-treated soil sample) from 43.0%, (i.e., 711 ± 23.4 mg/kg in control soil sample). This resulted from the conversion of water-soluble F to stable calcium fluoride, which was confirmed by XRD spectrometry. Soil ingestion, inhalation of fugitive dust from soil, and water ingestion were selected as exposure pathways for human health risk assessment. Non-carcinogenic risks of F in soils reduced to less than 1.0 after stabilization, ranging from 4.2 to 0.34 for child and from 3.0 to 0.25 for adult. Contaminated water ingestion owing to the leaching of F from soil to groundwater was considered as a major exposure pathway. The risks through soil ingestion and inhalation of fugitive dust from soil were insignificant both before and after stabilization, although F concentration exceeded the Korean soil regulatory level before stabilization. Our data suggested that substantial risk to human health owing to various potential exposure pathways could be addressed by managing F present in soil.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.2
• /
• pp.67-75
• /
• 2000

Cosmetic industries have recently developed sun-block products, which are composed of W/O or O/W emulsion system. It was very difficult for waterproofing product to show the stability in W/O emulsion with $TiO_{2}$. To enhance the stability of W/O emulsion, it needs to be combined with the water and oil soluble components as the gelling agents. The emulsifiers used in W/O were 3.0% of cetyl dimethicone copolyol, 2.0% of sorbitan sesquioleate as the basic emulsifiers, and 0.6% of quaternium-18 bentonite and 1.5% of dextrin palmitate as stabilizer were used. The content of titanium dioxide was optimized up to 8.0%. Titanium dioxide was used as the UV scattering powder coated with $Al_{2}O_{3}$(UV-sperse T40/TN). The sunscreen cream prepared with W/O emulsion system by using QB and DP showed higher stability than that of W/O emulsion system by using each QB and DP. W/O emulsion from Formula 3 for passing one year was very durable more than F1 and F2. Within W/O emulsion by observing F1, F2 and F3 for one year, F3 was more excellent than F2 and F3 when they were observed at RT, $4^{\circ}C$, $40^{\circ}C$, because F3 used the mixed QB and DP in W/O emulsion. The zeta potential for F1, F2, and F3 after one year were 21, 30 and 43, respectively. From these result F3 was found best stable emulsion. The in-vitro SPF value for F3 was 35 for the initial product at room temperature and also, the in-vitro SPF values of F3 was 32 for after one year. Finally, the mean in-vivo SPF value of 10 volunteers for F3 was 27.3 by the Korea cosmetic association made the rules of SPF.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.131-134
• /
• 2003

[ $ZnWO_4$ ] shows excellent frequency selectivity due to its high quality factor($Q{\times}f$) at microwave frequencies. However, in order to use $ZnWO_4$ as multilayered wireless communication components, its other properties such as sintering temperature($1050^{\circ}C$), ${\tau}_f$ ($-70ppm/^{\circ}C$) and ${\varepsilon}_r(15.5)$ should be modified. In present study, $TiO_2$ and LiF were used to improve the microwave dielectric and sintering properties of $ZnWO_4$. $TiO_2$ additions to $ZnWO_4$ changed ${\tau}_f$ from negative to positive value, and also increased ${\varepsilon}_r$ due to its high ${\tau}_f$ ($+400ppm/^{\circ}C$) and ${\varepsilon}_r$(100). At 20 mol% $TiO_2$ addition, ${\tau}_f$ was controlled to near zero $ppm/^{\circ}C$ with ${\varepsilon}_r=19.4$ and $Q{\times}f=50000GHz$. However, the sintering temperature was still high to $1100^{\circ}C$. LiF addition to the $ZnWO_4+TiO_2$ mixture was greatly reduced the sintering temperature from $1100^{\circ}C$ to $850^{\circ}C$ due to liquid phase formation. Also LiF addition decreased the ${\tau}_f$ value due to its high negative ${\tau}_f$ value. Therefore, by controlling the $TiO_2$ and LiF amount, temperature stable LTCC material in the $ZnWO_4$-TiO_2-LiF$ system could be fabricated.