• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.3
• /
• pp.163-170
• /
• 2008

The reductive stripping of Np using a n-butyraldehyde (NBA) from loaded organic solution containing Np, which was oxidative-extracted in a system of a 30 % TBP/NDD-2M $HNO_3$ and O/A=2 containing 0.005 M $K_2Cr_2O_7$ as an oxidant of Np, was studied. The stripping yields of Np was increased with an increasing the NBA concentration, with a decreasing the nitric acid concentration of stripping solution and with a decreasing the reaction temperature. The apparent reductive stripping rate equation was shown by the following equation : $-d[Np]_{Org.}/dt$ = 1,524 exp(-2,906/T) $[NBA]^{0.91}\;[H^+]^{-0.92}[Np]_{Org.}$. At 1.04 M NBA and 2 M $NHO_3$, the stripping yield of Np and U was 70.1 %, and 7.1 %, respectively, and the separation factor of U over Np ($=D_U/D_{Mp}$) was about 30.4. Therefore, it was found that U and Np co-extracted in a system of TBP-$HNO_3$ could be effectively mutual-separated by the NBA.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.327-331
• /
• 2010

Porcine placenta was treated with alkali, acid and enzyme treatment to obtain extracts. Heavy metal contents such as Pb, As, and Hg were low enough to satisfy cosmetic agent standard. As a result of safety test(MTT assay), porcine placenta extracts showed over 80% of cell viability at $50{\mu}g/ml$, and cell toxicity was relatively lower. From antioxidation test using DPPH free radical scavenging assay, antioxidation effect was highest as 63% at $50{\mu}g/ml$ when porcine placenta was treated with alkali in pH 9. From whitening effect test using tyrosinase inhibition assay, tyrosinase inhibition effect was 30% at $50{\mu}g/ml$ concentration in alkali treated procine placenta, however, the efficiency was lower compared with arbutin or vitamin C. In anti-wrinkle effect test from elastase inhibition assay, elastase inhibition effects were 20~30% at $50{\mu}g/ml$ for 5 kinds of porcine placenta treatments, which was superior to standard, and especially, protease treated extracts showed best results. Skin formulation including 1% porcine placenta was made and the formulation was very stable for temperature and storage period. From this research, porcine placenta extract showed high potential for anti-wrinkle functional cosmetic agent.

• Korean Journal of Materials Research
• /
• v.22 no.1
• /
• pp.46-53
• /
• 2012

In this study, mechanical tests and microstructural analyses including TEM analyses with EDX of precipitates in modified 9Cr-1Mo steel were carried out to determine the cause of embrittlement observed after heat-treatment, which limits the usage of the alloy for power plants. Mod. 9Cr-1Mo steel specimens at austenite temperature were quenched to the molten salt baths at $760^{\circ}C$ and $700^{\circ}C$, in which the specimens were kept for 10 min ~ 10 hr with subsequent air-cooling. Impact tests showed that the impact value dropped abruptly when the specimens were kept longer than 30 min at $\sim760^{\circ}C$ reaching to minima in about 1 hr, and then increasing at further retention. The tensile strength of the specimens reached the minimum value without much change afterward, whereas the values of elongation showed the same trend as that of the impact value. The isothermally heat-treated steel at $700^{\circ}C$ also showed a minimum impact value in about 1 hr. These results suggest that the isothermal heattreatment at 760 and $700^{\circ}C$ for about 1 hr induces temporal embrittlement in Mod. 9Cr-1Mo steel. The microstructural examination of all the specimens with extraction replica of the carbides revealed that the specimens with temporal embrittlement had $Cr_2C$, indicating that the cause of the embrittlement was the precipitation of the $Cr_2C$. In addition, TEM/EDX results showed that the Fe/Cr ratio was 0.033 to 0.055 for $Cr_2C$, whereas it was 0.48 to 0.75 for $Cr_{23}C_6$, making the distinction of the $Cr_2C$ and $Cr_{23}C_6$ possible even without direct electron diffraction analyses.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.404-409
• /
• 2006

Thin-film $ZnGa_2O_4 : Mn^{2+}$ phosphors of spinel structure were grown on quartz substrate by RF magnetron sputtering method at room temperature. As an increase of post-annealing temperatures, crystallinity, surface roughness and stoichiometry of thin films were varied. At the post-annealing temperatures of $500^{\circ}C$ and $600^{\circ}C$, the luminescence intensity was poor due to the poor crystallinity. The smallest surface roughness was observed at the sample post-annealed at $700^{\circ}C$ leading to low external extraction efficiency, and poor luminescence intensity. The highest luminescence intensity was shown at the sample post-annealed at $800^{\circ}C$. It was because both the surface roughness and crystallnity were optimized. On the other hand, at $900^{\circ}C$, the luminescence intensity was poor due to the violation of stoichiometry.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.4
• /
• pp.320-326
• /
• 2001

To obtain the basic data for preparing edible or biodegradable film, fish meal protein isolates (FMPI) were prepared through alkaline extraction. And FMPI's properties and the ester compounds permeability of FMPI film were measured. FMPI were extracted under various extracting time with 0.2 N NaOH solution at $60^{\circ}C$, Recovery ratios of FMPI extracted from fish meal were increased with extracting time increasing. Surface hydrophobicity of FMPI extracted for 1 hr showed highest value. Emulsifying activity index (EAI) was increased with the increasement of extracting time but its emulsifying stability index (ESI) showed an inverse results. Viscosity of FMPI solution showed the highest value at pH 2 but showed the lowest value at pH 4, The higher concentration of sorbitol as plasticizer showed the higher ethyl acetate permeability of FMPI film, Ethyl acetate permeability of FMPI films according to kind of plasticizers showed different degree and increased in order as follow: polyethylene glycol, glycerol and sorbitol. Ester compounds having the lower molecular weight showed the higher permeability. Increment of temperature increased the ethyl acetate permeability of FMPI film. FMPI haying higher surface hydrophobicity made FMPI film be higher tensile strength. On elongation of FMPI films, kinds of plasticizer were more effective than surface hydrophobicity of FMPI.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.2
• /
• pp.64-70
• /
• 2011

Portable artificial electronic nose (E-nose) system suffers from noisy fluctuation in surroundings such as temperature, vapor concentration, and gas flow, because its measuring condition is not controled precisely as in the laboratory. It is important to develop a simple and robust vapor recognition technique applicable to this uncontrolled measurement, especially for the portable measuring and diagnostic system which are expanding its area with the improvements in micro bio sensor technology. This study used a PDA-based portable E-nose to collect the uncontrolled vapor measurement signals, and applied the image matching algorithm developed in the previous study on the measured signal to verify its robustness and improved accuracy in portable vapor recognition. The results showed not only its consistent performance under noisy fluctuation in the portable measurement signal, but also an advanced recognition accuracy for 2 similar vapor species which have been hard to discriminate with the conventional maximum sensitivity feature extraction method. The proposed method can be easily applied to the data processing of the ubiquitous sensor network (USN) which are usually exposed to various operating conditions. Furthermore, it will greatly help to realize portable medical diagnostic and environment monitoring system with its robust performance and high accuracy.

• Journal of dental hygiene science
• /
• v.8 no.1
• /
• pp.35-42
• /
• 2008

This survey was compared and analyzed about the primary factor that dental office's working environment effect on physical subjective symptom and based on self-filling survey, 656 dental hygienists on July through August 2006, and analyzed using descriptive statics, ANOVA and Multiple Regression Analysis. The result of satisfaction degree of hospital working environment was pretty low about office air condition. Most people have complained that office's air quality makes it difficult to their work and mentioned that they were sore and dull all over the back, shoulder, and neck. The odor is major factor to be satisfied with office environment. Proper ventilates the way open the window more often was essential to maintain fresh indoor air quality and keep the extraction materials by separator and sealing tightly for remove the odor. Other factors were temperature, lighting fixture, ventilation facilities, and freshness of air. Dental hygienist was unsatisfied with hospital air condition and this polluted air condition was the cause of physical subjective symptom in work place. Furthermore, this research would be applied for improvement of working environment by decreasing of indoor air pollution.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.130-137
• /
• 1992

The Graft copolymerization of acrylonitrile(AN) and styrene(ST) onto chloroprene rubber(CR) were carried out with benzoyl peroxide(BPO) as an initiator. The synthesized graft copolymer(ACS) was separated from polymeric mixture by the extraction with ethyl acetate and n-hexane, acetone and methanol, dimethylformamide(DMF) and methanol mixed solvent systems. The graft copolymer obtained, acrylonitrile-chloroprene-styrene(ACS) was identified by IR spectrophotometer. The effect of mole ratio of styrene to acrylonitrile, reaction time and temperature, initiator concentration, CR content and solvents on graft copolymerization were examined. It was observed that the grafting efficiency increased with [ST]/[AN] mole ratio and reaction time. The grafting efficiency increased with increasing initiator concentration and CR content. The maximum grafting efficiency was obtained when the mole ratio of [ST]/[AN] was 1.5 and reaction was made at 40hrs, and $70^{\circ}C$ using chloroform/toluene mixed solvent. The thermal properties, light resistance and flammability of ACS were compared with those of ABS and AES. It was found that flame retardancy of related polymers increased in the order ACS>ABS>AES. The thermal stability of ACS was greatly improved when compared with ABS or AES. Morphology of ACS was also investigated by using a transmisson electron microscope(TEM).

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.69-69
• /
• 2002

Transgenic animals production tools have been valuable for research and purpose. The current methods of gene transfer, microinjection and nuclear transfer, which are widely used in transgenic animal production, but all most methods has only had limited success in production of larger species. Here, we report the possibility of a sperm-mediated gene transfer method in porcine embryos. Oocytes were collected from ovaries harvested at a local slaughterhouse were matured in 500${mu}ell$ drops of TCM-199 under mineral oil at 38.5$^{\circ}C$ in a humidified atmosphere of 5%CO2 in air. After 42-43h of in vitro maturation oocytes were denuded. for sperm injection into the cytoplasm of the porcine oocytes, sperm suspension in NIM medium are subjected extraction with TritonX-100 before mixing with a green fluorescent gene (GFP). Sperm with Tritonx-100 were prepared by adding TritonX-100 to a final volume of 0.05% in the sperm suspension and mixing by trituration for 60s before two wishes in NIM medium at 2$^{\circ}C$. A(ter wishing, sperm were mixed with TritonX-100 at $25^{\circ}C$ followed by washes at 2$^{\circ}C$. Sperm were resuspended in ice cold NIM to a final volume of 400${mu}ell$ and 2-20ng/${mu}ell$ DNA were triturated on ice for 60s. All microinjection was performed in HEPES-buffered CZB medium at room temperature within 2h. After culture in NCSU-23 for 72h, percent of porcine embryos transfected GFP gene are 20.7%(6/29) in 20ng/${mu}ell$ sperm-DNA mixed group and other groups were 3.7 %(2/54)and 4.7%(3/67). These data suggests that sperm-mediated gene transfer method should be used to the production tool of transgenic pig efficiently.

• The Korean Journal of Food And Nutrition
• /
• v.26 no.2
• /
• pp.226-233
• /
• 2013

The optimal amount of loquat leaf extract (LLE, $18^{\circ}$ Brix), fructose, and cream were determined to develop a rice beverage supplemented with LLE. The loquat leaves were extracted by water at $80^{\circ}C$ for 6 hrs and then concentrated to 18% of solid for 1 hr at the same temperature to extraction. To investigate the optimal concentration of the additives, the response surface methodology (RSM) was employed for the experimental design. The addition amounts of the additives were coded. Sweetness, bitterness, off-taste, color, taste preference, and total preference were affected significantly (P<0.05) by the addition of LLE, fructose, and cream. Cream masked the bitterness and off-taste. The total preference of the LLEsupplemented rice beverage showed a lower score than the commercialiy available rice beverages. To achieve the preference level of the commercial rice beverages, the regression between fructose and LLE concentration was calculated as: fructose= $0.618{\times}(LLE)^2+0.406{\times}(LLE)$. Conclusively, cream had an effect of masking the bitterness of rice milk, and the preference was highly related to the addition amount of fructose.