• KSBB Journal
• /
• v.25 no.5
• /
• pp.421-428
• /
• 2010

This paper reports on the experimental investigation carried out to evaluate the physical optimal conditions in the absorption column to remove odorous hydrogen sulfide gas. Hydrogen sulfide gas, as a highly undesirable contaminant, is most widely emitted from environmental treatment facilities. The absorbent mixed with natural second metabolites extracted from conifer trees and chemical absorbent of 2-aminoethanol was applied to remove it via chemical neutralization. The absorbent of natural second metabolites was achieved by a removal efficiency of 20-40% by itself depending on the treatment conditions, but the complex absorbent mixed with 0.1% amine chemical provides the removal efficiency of 98%. The optimal removal efficiencies have been examined against the two major parameters of temperature and pH. This study shows that the aqueous solution by natural second metabolites can be used as an appropriate absorbent in the column absorbed for the removal of hydrogen sulfide gas.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.38-43
• /
• 2020

To overcome the harmful effects caused by conventional oxidative hair dyes, natural colorants becomes more popular in the hair dyeing. By extracting Sagassum fusiforme powders with aqueous alkaline solution as a solvent at 130℃ for 60 minutes, a fucoxanthin concentration of up to 216㎍/ml can be obtained. UV/Vis analysis was used to prove the presence of fucoxanthin in the extract powder. A K/S value of 23.8 can be obtained when wool fabrics were dyed with the extract at 120℃ for 60 minutes under pH 2. The color fastness properties of the dyed wool fabrics were very good as indicated by rating 4 for laundering(color change), rating 3 or higher for rubbing, and rating 5 for light irradiation. The dyed wool fabric was found to have antimicrobial activity against Staphylococcus aureus. The antioxidant and antimicrobial activity of the Sagassum fusiforme extract can be an effective functional hair colorant. Hair dyeing with the extract formulation at 45℃ for 40 minutes under pH 5 accomplished a K/S value of 8.9. The color fastness of the dyed hair showed rating 3 against light irradiation, which increased to rating 5 with after-mordanting of tannin acid.

• Smart Media Journal
• /
• v.5 no.3
• /
• pp.62-66
• /
• 2016

The recent increase in virtual reality (VR) technology around the world has been VR work in cooperation with technology from other sectors to form new trends. In the case of advertising, it is difficult to trace if VR users viewed a certain piece of advertisement because the current technology does not allow them to interact with the screen. Eye tracking technology can act as a solution to the problem of tracing advertisement views as it allows for data extraction in relation to which advertisements were viewed and for how long. The research paper suggests a method of how to track the eyes of users in VR advertising. The suggested method includes communication between a server and VR HMD (virtual reality head mounted display) as well as a screen of output from the server.

• Resources Recycling
• /
• v.4 no.3
• /
• pp.26-31
• /
• 1995

The leaching characteristics of manganese nodules were investigated in dilute hydrochloric acid solution using copper malie as a reductant. Thc capper matte has been found to be an effective reductant for exhacting morc than 96% of Mn, 95% of Ni, 91% of Ca, 88% of Cu and 36% of Fe when leached in 2.5 M HCI at 70$^{\circ}$C for 2hr. The dissolutions of Mu, Co, and Ni depend on thc amaunt of added cappcr matte. 7he ratin of liquid and solid is an important [actor on the extraction of metals during leaching The dissolution af Mn, Co, Ni and Cu incrcascd w~th the increase in temperalure of leachant. The leaching rates of Mn, Co, NI and Cu from manganese nodule m the presznce of copper matte is limited by bath thc surface chemical reaction and pare diffusion processes. Thc activation energies far Mn. Co: Ni and Cu were 17. 61, 12.8, 17.2 and 57.88 KcaUmol, rcspcctively.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.487-492
• /
• 2018

Recently, various applications for image processing have been ported to the mobile environment due to the expansion of the image shooting on the mobile device. However, in the case of extracting the image foreground, which is one of the most important functions of image synthesis, is difficult since it needs complex calculation. In this paper, we propose an video synthesis technique that can divide images captured by mobile devices into foreground / background and combine them in real time on target images. Considering the characteristics of mobile shooting, our system can extract automatically foreground of input video that contains weak motion when shooting. Using SIMD and GPGPU-based acceleration algorithms, SD-quality images can be processed on mobile in real time.

• Resources Recycling
• /
• v.9 no.3
• /
• pp.22-28
• /
• 2000

A study on the recovery of gallium from zinc residues is carried out by alkali leaching using NaOH. The results show that in case of alkali leaching of zinc residues, Zn, K and Si are mainly leached out and Fe and other base metals are scarcely leached out, which results in that gallium is easily recovered by solvent extraction. The leaching efficiency of gallium increases with increasing alkali concentration and solid density. Especially, alkali consumption is considerably reduced by washing the zinc residues with water before leaching in order to eleminate the soluble zinc compounds. The gallium from zinc residues is found to be leached out with a recovery of 80% or higher for 2hrs leaching with 1~1.25 M/L NaOH solution and solid density 333 g/L at $25^{\circ}C$.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.277.1-277.1
• /
• 2013

Molecular diagnostics consists of three processes, which are a sample pretreatment, a nucleic acid amplification, and an amplicon detection. Among three components, sample pretreatment is an important process in that it can increase the limit of detection by purifying nucleic acid in biological sample from contaminants that may interfere with the downstream genetic analysis such as nucleic acid amplification and detection. To achieve point-of-care virus detection system, the sample pretreatment process needs to be simple, rapid, and automatic. However, the commercial RNA extraction kits such as Rneasy (Qiagen) or MagnaPure (Roche) kit are highly labor-intensive and time-consuming due to numerous manual steps, and so it is not adequate for the on-site sample preparation. Herein, we have developed a rotary microfluidic system to extract and purify the RNA without necessity of external mechanical syringe pumps to allow flow control using microfluidic technology. We designed three reservoirs for sample, washing buffer, and elution buffer which were connected with different dimensional microfluidic channels. By controlling RPM, we could dispense a RNA sample solution, a washing buffer, and an elution buffer successively, so that the RNA was captured in the sol-gel solid phase, purified, and eluted in the downstream. Such a novel rotary sample preparation system eliminates some complicated hardwares and human intervention providing the opportunity to construct a fully integrated genetic analysis microsystem.

• Korean Journal of Food Science and Technology
• /
• v.38 no.1
• /
• pp.140-142
• /
• 2006

Because ochratoxin A recovery level of Makgeolli is lower (<50%) than those of other commodities such as rice, barley, and beer, Makgeolli was evaluated to improve the recovery and enable routine analysis. Use of 3% sodium bicarbonate instead of phosphate-buffered saline as homogenizing solution provided good recovery of ochratoxin A (>80%) spiked in Makgeolli at level of 1 ppb. To determine if this analytical method is reliable for ochratoxin A detection in Makgeolli, survey was conducted for ochratoxin A in 30 sterile Makgeolli samples retailed in Korea. Only two wheat-based Makgeolli samples contained detectable level of ochratoxin A (0.8 and 2.1 ppb) as confirmed by HPLC- electrospray ionization- mass spectrometry. Extraction of sample with 3% sodium bicarbonate for 3 min, followed by cleanup of extracts with immunoaffinity columns, and HPLC with fluorescence detection provided dependable detection of ochratoxin A in Makgeolli samples.

• Journal of KIISE:Information Networking
• /
• v.33 no.1
• /
• pp.103-112
• /
• 2006

Priority-based network service has been widely adopted for the Internet traffic management in the context of IETF differentiated services, and computing optimal prices for such priority-based service is the key topic in many pricing literature. While the equilibrium analysis has been commonly used to this end, many have criticized the validity of the underlying assumption of equilibrium analysis that user utility functions are precisely known. In this paper, we propose a solution for bridging the gap between the existing theoretical work on optimal pricing and the unavailability of precise user utility information in real networks. In the proposed method, the service provider obtains more and more accurate estimates of user utility functions from the initial imprecise knowledge by iteratively changing the price of service levels and observing the users' decisions under the changed price. Our contribution is two-fold. First, we have developed a general principle for estimating the user utility functions. Second, we have developed a novel method for setting the prices that can optimize the extraction of the knowledge about user utility functions. The extensive simulation results demonstrate the effectiveness of our method.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.85-96
• /
• 2017

In this study, we tried to select a slag system capable of pyro-metallurgical process through analysis of sludge generated from PCB plating and etching process solution. Based on this, the possibility of extracting valuable metals in the sludge was studied by experimental and thermodynamic approaches. The sludge was dried at $100{\sim}500^{\circ}C$ and the morphology, chemical composition and phase of the sludge were analyzed. The possibility of pyro-metallurgical process of sludge was investigated through thermodynamic approach using FactSage software.